Very nice job on the eclipse photo, Stuart. Yes, the horizontal dispersal of sunlight adjacent to the path of totality in the high haze over Kentucky that afternoon made it very difficult to figure "how dark is it going to get?". Thinking I was smarter than my camera, I turned off auto control and set the aperture way open and the shutter speed way slow. I would have been better off letting the camera figure that stuff out. But I had made a pinhole camera for my wife and I had a pair of binoculars with which to project the image, so we had fun looking at it even though I didn't catch a photo of it.
Announcement
Collapse
No announcement yet.
Hardware issues - I'm just about hairless at this point. Some validation please.
Collapse
This topic is closed.
X
X
-
That photo was from my cell phone - no cover or protection - right at the totality. We had 2:46 of it where we were and, thankfully, a clear sky. It was a fun day.
- Top
- Bottom
Comment
-
Last PSU test: Today, I installed StarCraft 2 and played it for 3 hours. GPU ran at full load the hole time, no problem. Even with the closed case and full-blown hi-def graphics running for 3 hours, CPU stayed at 32° and the GPU peaked at 50° - that's when it's fans kick into high speed.
- Top
- Bottom
Comment
-
That's kinda hot isn't it? My CPU is water cooled which explains that difference, but yours seem really high for idle.
- Top
- Bottom
Comment
-
Those temps are Centigrade, just so it's clear. No way in Hell that any CPU, while running, would operate at 32 degrees Fahrenheit! Vinny is reporting his CPU temps in Fahrenheit.Originally posted by oshunluvr View PostLast PSU test: Today, I installed StarCraft 2 and played it for 3 hours. GPU ran at full load the hole time, no problem. Even with the closed case and full-blown hi-def graphics running for 3 hours, CPU stayed at 32° and the GPU peaked at 50° - that's when it's fans kick into high speed.Windows no longer obstruct my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
- Top
- Bottom
Comment
-
Originally posted by Snowhog View PostThose temps are Centigrade, just so it's clear. No way in Hell that any CPU, while running, would operate at 32 degrees Fahrenheit! Vinny is reporting his CPU temps in Fahrenheit.
yes that is true ,,,,but still you would think it's a bit high for idle ,,,,but even at high load it usually never gets above 75C or 167F ,,,,except 1 time wile doing a set of phoronix tests it held at 185F approximately each.
this is just a hot box ,,,,,,,,lol
VINNYi7 4core HT 8MB L3 2.9GHz
16GB RAM
Nvidia GTX 860M 4GB RAM 1152 cuda cores
- Top
- Bottom
Comment
-
What CPU are you using? My old Q6600 would get that hot, but AFAIK these newer CPUs aren't intended to get that hot. My CPU would start to issue shutdown warnings at 80°/176°. Any chance your sensors aren't configured right? My idle is 17-21° - 63-70°F (water cooling is awesome). My GPU runs hotter because it's on air. My old GPUs were also water cooled but I didn't bother with the expense when I upgraded my to current card. It has "smart" fan control and is rarely noisy.Originally posted by vinnywright View Post
yes that is true ,,,,but still you would think it's a bit high for idle ,,,,but even at high load it usually never gets above 75C or 167F ,,,,except 1 time wile doing a set of phoronix tests it held at 185F approximately each.
this is just a hot box
- Top
- Bottom
Comment
-
Keep in mind, Vinny is running a robust laptop and you a desktop PC. In Vinny's case, he could likely benefit from getting the dust out.Windows no longer obstruct my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
- Top
- Bottom
Comment
-
-
Intel(R) Core(TM) i7-4910MQ CPU @ 2.90GHz but speed steps to 3.9 ,,,,,,,,not sure about the sensors ,,,,,,,,,,,,,
yes a laptop and the fans stay running near full ,,,noisy as heck .Code:sensors -f acpitz-virtual-0 Adapter: Virtual device temp1: +145.4°F (crit = +248.0°F) coretemp-isa-0000 Adapter: ISA adapter Package id 0: +147.2°F (high = +183.2°F, crit = +212.0°F) Core 0: +147.2°F (high = +183.2°F, crit = +212.0°F) Core 1: +141.8°F (high = +183.2°F, crit = +212.0°F) Core 2: +140.0°F (high = +183.2°F, crit = +212.0°F) Core 3: +141.8°F (high = +183.2°F, crit = +212.0°F)
VINNYi7 4core HT 8MB L3 2.9GHz
16GB RAM
Nvidia GTX 860M 4GB RAM 1152 cuda cores
- Top
- Bottom
Comment
-
i7-6700K, 4GHz. Little cooler here:
Code:[FONT=monospace][COLOR=#54FF54][B]stuart@office[/B][/COLOR][COLOR=#000000]:[/COLOR][COLOR=#5454FF][B]~/Downloads[/B][/COLOR][COLOR=#000000]$ sensors -f[/COLOR] coretemp-isa-0000 Adapter: ISA adapter Package id 0: +75.2°F (high = +176.0°F, crit = +212.0°F) Core 0: +69.8°F (high = +176.0°F, crit = +212.0°F) Core 1: +71.6°F (high = +176.0°F, crit = +212.0°F) Core 2: +69.8°F (high = +176.0°F, crit = +212.0°F) Core 3: +69.8°F (high = +176.0°F, crit = +212.0°F) [/FONT]
- Top
- Bottom
Comment
-
That IS high, VINNY!
Here's mine:
Sort of at idle while I peruse this forum...Code:1:~$ sensors -f acpitz-virtual-0 Adapter: Virtual device temp1: +107.6°F (crit = +215.6°F) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +111.2°F (high = +188.6°F, crit = +221.0°F) Core 0: +111.2°F (high = +188.6°F, crit = +221.0°F) Core 1: +109.4°F (high = +188.6°F, crit = +221.0°F) Core 2: +102.2°F (high = +188.6°F, crit = +221.0°F) Core 3: +100.4°F (high = +188.6°F, crit = +221.0°F)
Is the thermal paste on your CPU's still good?"A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
– John F. Kennedy, February 26, 1962.
- Top
- Bottom
Comment
-
If you haven't done so already, I would contact System76 and ask if temps in that range, and that your fan is continuously running, is 'normal' for your rig, of if it is indicative of something needing attention.Originally posted by vinnywright View PostIntel(R) Core(TM) i7-4910MQ CPU @ 2.90GHz but speed steps to 3.9 ,,,,,,,,not sure about the sensors ,,,,,,,,,,,,,
yes a laptop and the fans stay running near full ,,,noisy as heck .Code:sensors -f acpitz-virtual-0 Adapter: Virtual device temp1: +145.4°F (crit = +248.0°F) coretemp-isa-0000 Adapter: ISA adapter Package id 0: +147.2°F (high = +183.2°F, crit = +212.0°F) Core 0: +147.2°F (high = +183.2°F, crit = +212.0°F) Core 1: +141.8°F (high = +183.2°F, crit = +212.0°F) Core 2: +140.0°F (high = +183.2°F, crit = +212.0°F) Core 3: +141.8°F (high = +183.2°F, crit = +212.0°F)
VINNYWindows no longer obstruct my view.
Using Kubuntu Linux since March 23, 2007.
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
- Top
- Bottom
Comment
Users Viewing This Topic
Collapse
There are 0 users viewing this topic.






Comment