Announcement

Collapse
No announcement yet.

Long time before login screen appears

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    # /usr/lib/systemd/system/sddm.service
    [Unit]
    Description=Simple Desktop Display Manager
    Documentation=man:sddm(1) man:sddm.conf(5)
    # Change this if you want to start sddm in a different tty
    Conflicts=getty@tty1.service
    After=getty@tty1.service

    # If using tty1 and plymouth, sddm will fail till plymouth stops
    # consider using:
    ## After=plymouth-quit.service
    # or to forcefully stop plymouth and start earlier:
    ## Conflicts=plymouth-quit-wait.service
    ## After=plymouth-start.service plymouth-quit-wait.service
    ## OnFailure=plymouth-quit.service

    # Ordering
    Conflicts=plymouth-quit-wait.service
    After=systemd-user-sessions.service plymouth-start.service plymouth-quit-wait.se>
    OnFailure=plymouth-quit.service

    # Wait for driver loading to be complete so that graphics work
    # (https://github.com/sddm/sddm/issues/1917)
    Wants=systemd-udev-settle.service
    After=systemd-udev-settle.service

    [Service]



    ​

    Comment


      #17
      I noticed some conflicts but I cannot interpret these.....

      Comment


        #18
        just run those three commands (one at a time) like i did, and then reboot

        now when you run the chain command you should find your 1min30s long process no longer occurs and your boot time is shortened by that amount.
        some stuff i did: https://github.com/droidgoo

        Intel® Core™ i7-14700K | 64 GiB of RAM | AMD RX 6800

        Comment


          #19
          All right skyfishgoo, will do that and let you know the results.

          Comment


            #20
            I am here on another computer because on the kubuntu on, after I executed those commands:

            1. yes, that computer started as usual: fast, but then
            2. whatever I try I cannot use both keyboard and mouse!!
            3. A restart did not solve my problem.

            What can I do? I hope you can imagine that I am a little bit in despair over here.

            Comment


              #21
              that seems like a different problem, i'm afraid.

              but if you want to undo the those three commands you can
              Code:
              sudo systemctl enable NetworkManager-wait-online.service
              sudo systemctl unmask lvm2-monitor.service
              sudo systemctl enable lvm2-monitor.service
              sudo systemctl unmask systemd-udev-settle.service​
              sudo systemctl enable systemd-udev-settle.service
              and then reboot

              Last edited by skyfishgoo; Nov 12, 2026, 03:24 PM.
              some stuff i did: https://github.com/droidgoo

              Intel® Core™ i7-14700K | 64 GiB of RAM | AMD RX 6800

              Comment


                #22
                But, as I wrote, I cannot use both keyboard and mouse!!

                Comment


                  #23
                  update: I unplugged all extra hardware (printer and USB3 switch and then restarted.
                  Everything suddenly worked!!
                  And..... fast.
                  Problem solved!

                  Comment


                    #24
                    whew, well glad it's working.
                    some stuff i did: https://github.com/droidgoo

                    Intel® Core™ i7-14700K | 64 GiB of RAM | AMD RX 6800

                    Comment


                      #25
                      The udev.settle service was probably waiting for those devices to be "available". You really need to turn it off so you can use your computer normally.

                      I wonder if there's a non-destructive way to figure out what exactly caused it to be installed in the first place.

                      Please Read Me

                      Comment


                        #26
                        Originally posted by oshunluvr View Post
                        The udev.settle service was probably waiting for those devices to be "available". You really need to turn it off so you can use your computer normally.

                        I wonder if there's a non-destructive way to figure out what exactly caused it to be installed in the first place.
                        I am quite puzzled too. I did not ANYTHING to install or change the hardware or software on that computer or the other one. The only thing I know was that I had (and still have) my printer and a usb 3.0 bi-direction switch (which I use to switch the printer from 1 computer to the other) to unplug from both computers. And then to my relief it again started to behave normally.

                        Comment


                          #27
                          i doubt that was it, since it was installed on my instance as well and iv'e never had any such switch or any weird disk arrangemetns on any of my machines... just HDDs and SSDs connected locally via SATA or PCIe interfaces for boot devices and the odd usb dive.

                          might have come with the HWE kernel at some point in the past.
                          some stuff i did: https://github.com/droidgoo

                          Intel® Core™ i7-14700K | 64 GiB of RAM | AMD RX 6800

                          Comment


                            #28
                            Well. whatever it was, I did not, as far as I am aware of, change any kernel version. Do not know what HWE actually is.
                            So, I am, for the first time, afraid executing the updates coming from the software center.
                            Normally I am download and executing these without any concern.

                            Comment


                              #29
                              if your configuration is working now, then you are good and updates should not change anything about your configuration going forward.

                              there are a lot of scripts that run when linux is started to determine what hardware is installed and how to support it... and likely something different about our chipset or hardware combo triggered the need to activate this service, where it did not for others.

                              if it's solved, i wouldn't over think it.
                              some stuff i did: https://github.com/droidgoo

                              Intel® Core™ i7-14700K | 64 GiB of RAM | AMD RX 6800

                              Comment


                                #30
                                So, I am, for the first time, afraid executing the updates coming from the software center.
                                Normally I am download and executing these without any concern.​
                                don't think you need to worry about it ,the update likely just changed timing or device probing enough to expose an existing flaky device.

                                So is the printer and usb switch unplugged or plugged in now that the start ups is normal?
                                ▁ ▂ ▄ ▅ ▆ ▇ █ ᄂIПЦX FӨЯ ᄂIFΣ █ ▇ ▆ ▅ ▄ ▂ ▁

                                Comment

                                Users Viewing This Topic

                                Collapse

                                There are 0 users viewing this topic.

                                Working...
                                X