Announcement

Collapse
No announcement yet.

ETPS/2 Elantech touchpad

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    ETPS/2 Elantech touchpad

    Kubuntu 13.04, Acer Aspire V5-572G laptop with Elantech Clickpad. I get no response from the clickpad and have been using a USB mouse. The system recognizes the device. Tried adding an xorg.conf file and stanza for the clickpad, but still no response.
    Stanzas added:

    Code:
    Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	Screen      1  "Screen1" RightOf "Screen0"
	Screen      2  "Screen2" RightOf "Screen1"
	Screen      3  "Screen3" RightOf "Screen2"
	Screen      4  "Screen4" RightOf "Screen3"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Touchpad"
EndSection

 Section "InputDevice"        Identifier      "Touchpad"
        Driver          "synaptics"
        Option          "Device"                "/dev/input/mouse0"
        Option          "Protocol"              "auto-dev"
        Option          "VertTwoFingerScroll"   "1"
        Option          "HorizTwoFingerScroll"  "1"
        Option          "TapButton1"            "1"
        Option          "TapButton2"            "2"
        Option          "TapButton3"            "3"
EndSection
    Attached Files
    Linux because it works. No social or political motives in my decision to use it.
    Always consider Occam's Razor
    Rich
    Tags: None
    • Top
    • Bottom
    #2
    Is the touchpad 'active' when the USB mouse is not connected?
    Windows no longer obstruct my view.
    Using Kubuntu Linux since March 23, 2007.
    "It is a capital mistake to theorize before one has data." - Sherlock Holmes​
    • Top
    • Bottom

    Comment

      #3
      Originally posted by Snowhog View Post
      Is the touchpad 'active' when the USB mouse is not connected?
      No
      Linux because it works. No social or political motives in my decision to use it.
      Always consider Occam's Razor
      Rich
      • Top
      • Bottom

      Comment

        #4
        Take a look at Fix for ETPS/2 Elantech Touchpad not working in 12.04
        Windows no longer obstruct my view.
        Using Kubuntu Linux since March 23, 2007.
        "It is a capital mistake to theorize before one has data." - Sherlock Holmes​
        • Top
        • Bottom

        Comment

          #5
          Originally posted by Snowhog View Post
          Take a look at Fix for ETPS/2 Elantech Touchpad not working in 12.04
          That caused my system to not boot at all. I had to remove the xorg.conf and now it boots, but the system now reports no touchpad at all.

          EDIT: But upon a reboot, still reporting no touchpad the touchpad works in an elementary fashion. That is cursor movement and left/right mouse clicks, no scroll.
          Last edited by richb; Aug 10, 2013, 05:36 PM.
          Linux because it works. No social or political motives in my decision to use it.
          Always consider Occam's Razor
          Rich
          • Top
          • Bottom

          Comment

            #6
            I have similar problem but with SynPS/2 Synaptics TouchPad. Before login TouchPad working, when i login as quest it still working. When i login with my user he stop response. I find that the command xinput enable "SynPS/2 Synaptics TouchPad" turn TouchPad work again.

            P.S This happend when i upgrade from 12.10 to 13.03.
            • Top
            • Bottom

            Comment

              #7
              In my case xinput does not report the touchpad at all. Before I fiddled with settings, I will need to search my memory for what I did, it did report the touchpad, but it did not work. Using xinput enable (name of touchpad) had no effect at that time.
              Linux because it works. No social or political motives in my decision to use it.
              Always consider Occam's Razor
              Rich
              • Top
              • Bottom

              Comment

                #8
                Originally posted by richb View Post
                That caused my system to not boot at all. I had to remove the xorg.conf and now it boots, but the system now reports no touchpad at all.

                EDIT: But upon a reboot, still reporting no touchpad the touchpad works in an elementary fashion. That is cursor movement and left/right mouse clicks, no scroll.
                Scrolling is often specified as available at the left or right edge of the pad. Tap and move your finger up/down on either the left or right edge of the pad.
                Windows no longer obstruct my view.
                Using Kubuntu Linux since March 23, 2007.
                "It is a capital mistake to theorize before one has data." - Sherlock Holmes​
                • Top
                • Bottom

                Comment

                  #9
                  I knew that. It simply does not work. Since the touchpad does not report in xinput, I believe it is being reported as a mouse.

                  Code:
                  richard@richard-Aspire-V5-572G:~$ xinput
⎡ Virtual core pointer                          id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                     id=9    [slave  pointer  (2)]
⎜   ↳ Logitech USB Receiver                     id=10   [slave  pointer  (2)]
⎜   ↳ PS/2 Generic Mouse                        id=13   [slave  pointer  (2)]
⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
    ↳ Power Button                              id=6    [slave  keyboard (3)]
    ↳ Power Button                              id=7    [slave  keyboard (3)]
    ↳ Sleep Button                              id=8    [slave  keyboard (3)]
    ↳ HD WebCam                                 id=11   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard              id=12   [slave  keyboard (3)]
    ↳ Acer WMI hotkeys                          id=14   [slave  keyboard (3)]
                  Linux because it works. No social or political motives in my decision to use it.
                  Always consider Occam's Razor
                  Rich
                  • Top
                  • Bottom

                  Comment

                    #10
                    Check the BIOS Setup for "legacy USB support". If it does, try switching to it.
                    Windows no longer obstruct my view.
                    Using Kubuntu Linux since March 23, 2007.
                    "It is a capital mistake to theorize before one has data." - Sherlock Holmes​
                    • Top
                    • Bottom

                    Comment

                    Previous template Next

                    Users Viewing This Topic

                    Collapse

                    There are 0 users viewing this topic.

                    Working...
                    X