Help Me Enjoy [Install] Kubuntu Please

[elijathegold]

Enter Yes and press return. I don't remember it showing that after saving using Ctrl + O

[logan01]

what about this at the bottom? Save modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ?

[elijathegold]

Say yes as you want to save the file. Terminology is a bit geeky in there aint it? Still it's no vi O_O

[logan01]

what about this at the bottom? Save modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ? Y (yes)?

[elijathegold]

Hmmmm.... Try right clicking and selecting paste.

There are two clipboards in Linux and if one of them doesn't work the other usually will.

[logan01]

Should I see the code pasted? Don't see it. I copied, did the shift/insert and I see nothing. At the bottom are things to select from and right above them, highlighted, is [New File ]

[logan01]

ok. Copying all.

[elijathegold]

Copy the lot. It may come in handy later although the lines you chose are currently the only ones that will actually do anything.

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xe fefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

[logan01]

I can't tell what is labeled as code. Just this?

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

[elijathegold]

Everything in the box labelled as code.

[logan01]

Before I do, he said copy all from top to bottom. Sure about that?

[logan01]

ok, lets give her a spin.

[elijathegold]

So, starting from scratch.

Copy the code as provided and then open a terminal window. Run the following commands and key presses:

cd /etc/default
sudo nano grub
<enter your user password>
Press Shift + Insert to paste the code
Press Ctrl +O to save
Press Ctrl + X to exit

As I said earlier nothing will appear to happen when entering your password. Once this is completed the grub file will be ready and we can continue with the final steps.

[logan01]

alrighty.

[elijathegold]

Give me a minute to type something up...