Announcement

Collapse
No announcement yet.

Installing onto Mac G3 Laptop

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • soundpro
    Guest replied
    Re: Installing onto Mac G3 Laptop

    Closing the loop on this one...
    It seems that I can't read the Kubuntu disk from the G3's standard CD-ROM drive. I swapped it with a DVD-ROM drive, and it recognized the disk and loaded just fine. Lucky I had a friend with a DVD drive! Anyway, I'm posting from my G3 right now. There are a few bugs to get through, but at least I'm past the BIG one!
    Cheers!

    Leave a comment:


  • soundpro
    Guest replied
    Re: Installing onto Mac G3 Laptop

    Thanks much, people! I've tried all you've suggested, but sadly it's still not working. I may have a faulty CD-ROM drive... it's not reading CD-R. It reads commercially-produced CDs OK, and it reads CD-RW, but oddly not a CD-R produced from the ISO image I downloaded from kubuntu.org.

    Leave a comment:


  • RenegadeAbe
    replied
    Re: Installing onto Mac G3 Laptop

    Originally posted by soundpro
    Flush with success in putting Kubuntu on a PC, I tried putting the Power PC version on my Mac G3 laptop. Alas, I can't get the Mac to boot from the disk. I hold down "C" to boot from CD, but it doesn't seem bootable.
    Someone please give me a clue! Thanks.
    Here's a few commands that may help you:

    c
    Boot from CD. If set to boot to X and no CD is present, may boot to OS9.

    cmd-opt-shift-delete
    Bypass startup drive and boot from external (or CD). This actually forces the system to NOT load the driver for the default volume, which has the side effect mentioned above. For SCSI devices it searches from highest ID to lowest for a partition with a bootable system. Not sure about IDE drives.

    cmd-opt-shift-delete-#
    Boot from a specific SCSI ID # (# = SCSI ID number)

    hope it helps

    Leave a comment:


  • aysiu
    replied
    Re: Installing onto Mac G3 Laptop

    I've tried booting CDs from Mac, and there's a very slim window in which to press and hold the "c" key. I've actually found that you can't start holding it too early or too late. It has to be about a moment after the computer gains consciousness but not before it starts working.

    Leave a comment:


  • soundpro
    Guest started a topic Installing onto Mac G3 Laptop

    Installing onto Mac G3 Laptop

    Flush with success in putting Kubuntu on a PC, I tried putting the Power PC version on my Mac G3 laptop. Alas, I can't get the Mac to boot from the disk. I hold down "C" to boot from CD, but it doesn't seem bootable.
    Someone please give me a clue! Thanks.

Users Viewing This Topic

Collapse

There are 0 users viewing this topic.

Working...
X