[Post-Install] My ssd is burning?

[kubuntero]

Since I started using Kubuntu, I've used Psensor to monitor my PC's temperature. The problem is that the SSDs I have on two PCs (one with 24.04 and the other with 25.04) always read 99 degrees Celsius. (210.2 FAHRENHEIT google says)
Is this a sensor issue, or has the SSD been burning up for years?
It feels cold to the touch, at least the mine
My ssd is a kingston 960gb a400 the other is a smaller one from another brand that i cant remember now

[claydoh]

Check a different sensor tool, psensor may be bugged, or needs configuration. Mine also reads 99C

But :

sudo smartctl -a /dev/sda

shows it at a much more same 67, or is it 33? (the raw value is 33, the value is 67)) -- it is idle most of the time.

Now, Psensor shows this temp (33) as temp1 for me, which is a drive temp, and composite is my NVME drive, so.......

[kubuntero]

Cheking with this command seem to be that the average temperature is 22 and the worst was 47

This is the place where i have to look, right?