Announcement

Collapse
No announcement yet.

Updated driver for AMD RX470 graphics

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Updated driver for AMD RX470 graphics

    Hi. I have an AMD graphics card whose main HDMI output is faulty (feeding into a Dell monitor with jack audio output into speakers). I am now using a DVI output port with a DVI to HDMI adaptor for graphics. Only problem is I get no audio from this connection. Previously the audio from the HDMI port worked fine until the port failed. I get no available physical connection in the audio settings, only my motherboard onboard audio. I am using KDE Neon on 18.04, but a live Kubuntu 20.04 gives the same result.

    Any help?

    P.S. This output configuration works normally under Windows 10.

    Code:
    *-display
         description: VGA compatible controller
         product: Ellesmere [Radeon RX 470/480/570/570X/580/580X]
         vendor: Advanced Micro Devices, Inc. [AMD/ATI]
         physical id: 0
         bus info: pci@0000:01:00.0
         version: cf
         width: 64 bits
         clock: 33MHz
         capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
         configuration: driver=amdgpu latency=0
         resources: irq:29 memory:e0000000-efffffff memory:f0000000-f01fffff ioport:e000(size=256) memory:f7e00000-f7e3ffff memory:c0000-dffff
      
*-multimedia
         description: Audio device
         product: Ellesmere [Radeon RX 580]
         vendor: Advanced Micro Devices, Inc. [AMD/ATI]
         physical id: 0.1
         bus info: pci@0000:01:00.1
         version: 00
         width: 64 bits
         clock: 33MHz
         capabilities: pm pciexpress msi bus_master cap_list
         configuration: driver=snd_hda_intel latency=0
         resources: irq:32 memory:f7e60000-f7e63fff
    Last edited by cookiemuncher; May 29, 2020, 04:07 AM.
    Tags: amd graphics card driver
    • Top
    • Bottom
    #2
    AMD drivers are open source, so there is nothing to update to - you have the latest driver available.
    The issue lies elsewhere, most likely. I have a similar card (rx480) on KDE neon, and I do use an adapter though it is a Displayport to HDMI, and sound works.

    What does the output of the command aplay -l show?

    here is mine

    Code:
    [FONT=monospace][COLOR=#000000][B]claydoh@claydoh-Pavilion590[/B][/COLOR][COLOR=#000000]:[/COLOR][COLOR=#5454FF][B]~[/B][/COLOR][COLOR=#000000]$ aplay -l[/COLOR]
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC671 Analog [ALC671 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

[/FONT]
    Odd, as my card has 3 DVI slots and one HDMI, with a monitor and a TV connected.
    ​
    • Top
    • Bottom

    Comment

      #3
      Originally posted by claydoh View Post
      AMD drivers are open source, so there is nothing to update to - you have the latest driver available.
      The issue lies elsewhere, most likely. I have a similar card (rx480) on KDE neon, and I do use an adapter though it is a Displayport to HDMI, and sound works.

      What does the output of the command aplay -l show?

      here is mine

      Code:
      [FONT=monospace][COLOR=#000000][B]claydoh@claydoh-Pavilion590[/B][/COLOR][COLOR=#000000]:[/COLOR][COLOR=#5454ff][B]~[/B][/COLOR][COLOR=#000000]$ aplay -l[/COLOR]
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC671 Analog [ALC671 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0

[/FONT]
      Odd, as my card has 3 DVI slots and one HDMI, with a monitor and a TV connected.
      Code:
      [FONT=monospace][COLOR=#54ff54][B]chris@neon[/B][/COLOR][/FONT][FONT=monospace]:[B][COLOR=#000025]~[/COLOR][/B][/FONT][FONT=monospace]$ aplay -l show
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev3 Analog [ALC662 rev3 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
Subdevices: 1/1
Subdevice #0: subdevice #0
[/FONT]


      In audio settings, 'playback devices' indicates 'Dummy Output', under advanced shows 'profile: off' with no other possibility.
      Last edited by cookiemuncher; Jun 04, 2020, 05:42 AM.
      • Top
      • Bottom

      Comment

        #4
        The only thing I can think of at the moment is that, as this setup is working in Windows, is that maybe the specific adapter is not supported in Linux?

        You see nothing for this audio device connection in the tray applet or in system settings at all?
        ​
        • Top
        • Bottom

        Comment

          #5
          Originally posted by claydoh View Post
          The only thing I can think of at the moment is that, as this setup is working in Windows, is that maybe the specific adapter is not supported in Linux?

          You see nothing for this audio device connection in the tray applet or in system settings at all?
          Tray indicates audio muted. If I click the speaker in the tray I get 'no output or input devices found'. Weird.

          EDIT:
          Downloaded the latest Fedora iso and same problem. Shows 'dummy' under device. Strangest thing is that Fedora has a audio level indicator under the 'dummy' device in the audio settings which indicates presence of audio, but no output .
          Last edited by cookiemuncher; May 28, 2020, 06:44 PM. Reason: Fedora
          • Top
          • Bottom

          Comment

            #6
            Then my guess is it may be the adapter.
            I haven't found much solid info on these

            Sent from my LM-V600 using Tapatalk
            ​
            • Top
            • Bottom

            Comment

              #7
              Only bit of luck so far in getting this audio to work is by downloading Ubuntu Studio 20.04. With this distro I get a dropdown list of audio connections in the configuration profile but they display '(unplugged)(unavailable)' for each connection. That distro live uses ubuntu-studio 5.4.0-26-lowlatency.
              Last edited by cookiemuncher; May 30, 2020, 03:18 AM.
              • Top
              • Bottom

              Comment

                #8
                I get a dropdown list of audio connections in the configuration profile but they display '(unplugged)(unavailable)' for each connection.
                This is all leading to the idea that audio over this sort of adapter is either not supported in Linux, or the particular adapter itself is not supported in Linux. Do you have any info or links for the one you are using?

                it may be a very long shot, but have you tried swapping out the hdmi cable for a different one?


                I am not having luck finding solid and recent info on this topic, though I have not been able to dive in too deeply, as I am a bit overburdened with work obligations
                ​
                • Top
                • Bottom

                Comment

                  #9
                  You are using the DVI output on the GPU? To the best of my knowledge, audio is not passed out over DVI, only HDMI. I know it works under some instances, but your card may either not pass the audio, or your adapter might not be letting it through. Also your monitor may not be expecting audio over DVI.

                  Your monitor may have an analog jack input for audio. In which case I would just connect that to the line on your PC sound card.
                  • Top
                  • Bottom

                  Comment

                    #10
                    Originally posted by mr_raider View Post
                    You are using the DVI output on the GPU? To the best of my knowledge, audio is not passed out over DVI, only HDMI. I know it works under some instances, but your card may either not pass the audio, or your adapter might not be letting it through. Also your monitor may not be expecting audio over DVI.

                    Your monitor may have an analog jack input for audio. In which case I would just connect that to the line on your PC sound card.
                    But there is this:
                    P.S. This output configuration works normally under Windows 10.
                    ​
                    • Top
                    • Bottom

                    Comment

                    Previous template Next

                    Users Viewing This Topic

                    Collapse

                    There are 0 users viewing this topic.

                    Working...
                    X