Huge Display/Graphics & Fonts

This topic is closed.

pongolo

Junior Member

Join Date: Jun 2009
Posts: 15
Send PM

Huge Display/Graphics & Fonts

Jun 29, 2009, 06:17 PM

I am fairly new to Linux and have tried to solve this issue on my own for the last few weeks (I posted this in the Multimedia & Video section and general Installation section of the ubuntuforums.com but didn't get any response).

The problem I have is that when booting into Kubuntu using a 20" LCD Dell monitor, everything looks great, however when booting using an Onkyo TX-SR606 receiver, the graphics and fonts are HUGE. The Onkyo receiver is connected to a Samsung 52" LCD HDTV (LN52A850) via HDMI. I'm running Kubuntu 9.04 on an ASUS P5Q-EM motherboard with an Intel G45 onboard graphics chipset. I'm using the HDMI for video and audio output to the receiver. I have Windows XP on dual boot and the display works fine under Windows XP.

I have searched for an answer and believe the problem lies in the EDID that the Onkyo is reporting since there is a line about "Quirked EDID physical size to 0x0 cm."

Code:

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux media 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
Build Date: 09 April 2009 02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd) 
  Before reporting problems, check [url]http://wiki.x.org[/url]
  to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 20 20:34:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "LCD" (0)
(**) |  |-->Monitor "TX-SR606"
(**) |  |-->Device "intel"
(**) Option "DontZap" "False"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
  Entry deleted from font path.
(==) FontPath set to:
  /usr/share/fonts/X11/misc,
  /usr/share/fonts/X11/100dpi/:unscaled,
  /usr/share/fonts/X11/75dpi/:unscaled,
  /usr/share/fonts/X11/Type1,
  /usr/share/fonts/X11/100dpi,
  /usr/share/fonts/X11/75dpi,
  /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
  built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
  If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
  X.Org ANSI C Emulation: 0.4
  X.Org Video Driver: 5.0
  X.Org XInput driver : 4.0
  X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
  [0] -1  0  0xffffffff - 0xffffffff (0x1) MX[b]
  [1] -1  0  0x000f0000 - 0x000fffff (0x10000) MX[b]
  [2] -1  0  0x000c0000 - 0x000effff (0x30000) MX[b]
  [3] -1  0  0x00000000 - 0x0009ffff (0xa0000) MX[b]
  [4] -1  0  0x0000ffff - 0x0000ffff (0x1) IX[b]
  [5] -1  0  0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  Module class: X.Org Server Extension
  ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  Module class: X.Org Server Extension
  ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.13.0
  Module class: X.Org Server Extension
  ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 2.6.3
  Module class: X.Org Video Driver
  ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
  i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
  E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
  965GM, 965GME/GLE, G33, Q35, Q33,
  Mobile Intel® GM45 Express Chipset,
  Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
  [0] -1  0  0xffffffff - 0xffffffff (0x1) MX[b]
  [1] -1  0  0x000f0000 - 0x000fffff (0x10000) MX[b]
  [2] -1  0  0x000c0000 - 0x000effff (0x30000) MX[b]
  [3] -1  0  0x00000000 - 0x0009ffff (0xa0000) MX[b]
  [4] -1  0  0x0000ffff - 0x0000ffff (0x1) IX[b]
  [5] -1  0  0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
  [0] -1  0  0xffffffff - 0xffffffff (0x1) MX[b]
  [1] -1  0  0x000f0000 - 0x000fffff (0x10000) MX[b]
  [2] -1  0  0x000c0000 - 0x000effff (0x30000) MX[b]
  [3] -1  0  0x00000000 - 0x0009ffff (0xa0000) MX[b]
  [4] 0  0  0x000a0000 - 0x000affff (0x10000) MS[b]
  [5] 0  0  0x000b0000 - 0x000b7fff (0x8000) MS[b]
  [6] 0  0  0x000b8000 - 0x000bffff (0x8000) MS[b]
  [7] -1  0  0x0000ffff - 0x0000ffff (0x1) IX[b]
  [8] -1  0  0x00000000 - 0x00000000 (0x1) IX[b]
  [9] 0  0  0x000003b0 - 0x000003bb (0xc) IS[b]
  [10] 0  0  0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 0.1.0
  ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
(--) intel(0): Chipset: "G45/G43"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE400000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section TX-SR606
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output HDMI-2 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_C" initialized.
(II) intel(0): HDMI output 2 detected
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C device "HDMIDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "HDMIDDC_C:ddc2" registered at address 0xA0.
(II) Quirked EDID physical size to 0x0 cm
(II) Quirked EDID physical size to 0x0 cm
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) intel(0): Output VGA disconnected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output HDMI-2 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output HDMI-2 using initial mode 1920x1080
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 1.0.0
  ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 2.4.0
  ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x80000206
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
  [0] -1  0  0xffffffff - 0xffffffff (0x1) MX[b]
  [1] -1  0  0x000f0000 - 0x000fffff (0x10000) MX[b]
  [2] -1  0  0x000c0000 - 0x000effff (0x30000) MX[b]
  [3] -1  0  0x00000000 - 0x0009ffff (0xa0000) MX[b]
  [4] 0  0  0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
  [5] 0  0  0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
  [6] 0  0  0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
  [7] -1  0  0x0000ffff - 0x0000ffff (0x1) IX[b]
  [8] -1  0  0x00000000 - 0x00000000 (0x1) IX[b]
  [9] 0  0  0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
  [10] 0  0  0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 804608 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 3218428 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfe400000
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 44236800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)     Solid
(II)     Copy
(II)     Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d5d0000 (pgoffset 54736)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x01fff000:      end of stolen memory
(II) intel(0): 0x01fff000-0x0d5cffff: DRI memory manager (186180 kB)
(II) intel(0): 0x0d5d0000-0x0fffffff: exa offscreen (43200 kB)
(II) intel(0): 0x10000000:      end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x01fff000:      start of memory manager
(II) intel(0): 0x02020000-0x02e2ffff: depth buffer (14400 kB) Y tiled
(II) intel(0): 0x03020000-0x03e2ffff: back buffer (14400 kB) X tiled
(II) intel(0): 0x04020000-0x04e2ffff: front buffer (14400 kB) X tiled
(II) intel(0): 0x05020000-0x05029fff: HW cursors (40 kB)
(II) intel(0): 0x0d5d0000:      end of memory manager
(WW) intel(0): ESR is 0x00000011, page table error
(WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0):  Pipe A is on
(II) intel(0):  Display plane A is now enabled and connected to pipe A.
(II) intel(0):  Pipe B is off
(II) intel(0):  Display plane B is now disabled and connected to pipe B.
(II) intel(0):  Output VGA is connected to pipe none
(II) intel(0):  Output HDMI-1 is connected to pipe none
(II) intel(0):  Output HDMI-2 is connected to pipe A
(II) intel(0): [drm] mapped front buffer at 0xd4020000, handle = 0xd4020000
(II) intel(0): [drm] mapped back buffer at 0xd3020000, handle = 0xd3020000
(II) intel(0): [drm] mapped depth buffer at 0xd2020000, handle = 0xd2020000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(WW) intel(0): Option "UseEDIDDpi" is not used
(WW) intel(0): Option "DPI" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 160 x 90
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
  compiled for 1.6.0, module version = 2.1.1
  Module class: X.Org XInput Driver
  ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Optical Mouse
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event4"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Optical Mouse: (accel) set acceleration profile 0
(II) Quirked EDID physical size to 0x0 cm
(II) Quirked EDID physical size to 0x0 cm
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x720"x0.0  74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) intel(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) Quirked EDID physical size to 0x0 cm
(II) Quirked EDID physical size to 0x0 cm
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x720"x0.0  74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) intel(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) Quirked EDID physical size to 0x0 cm
(II) Quirked EDID physical size to 0x0 cm
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x720"x0.0  74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) intel(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) Quirked EDID physical size to 0x0 cm
(II) Quirked EDID physical size to 0x0 cm
(II) intel(0): EDID vendor "ONK", prod id 2147
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x720"x0.0  74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
(II) intel(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ONK", prod id 2147

I have tried multiple combinations of options and settings in the xorg.conf without ANY success. Here's the latest xorg.conf I'm using:

xorg.conf:

Code:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
  Identifier  "intel"
  Driver    "intel"
EndSection

Section "Monitor"
  # Block type: 2:0 3:fc
  Identifier   "TX-SR606"
  VendorName  "ONK"
  ModelName  "TX-SR606"
  # Block type: 2:0 3:fc
  # Block type: 2:0 3:fd
  HorizSync  26-68
  VertRefresh  23-60
#  DisplaySize  708 286
#  # Max dot clock (video bandwidth) 170 MHz
  # DPMS capabilities: Active off:no Suspend:no Standby:no
  Mode  "1920x1080"   # vfreq 60.000Hz, hfreq 67.500kHz
    DotClock    148.500000
    HTimings    1920 2008 2052 2200
    VTimings    1080 1084 1089 1125
    Flags  "+HSync" "+VSync"
  EndMode
  Mode  "1280x720"   # vfreq 60.000Hz, hfreq 45.000kHz
    DotClock    74.250000
    HTimings    1280 1390 1430 1650
    VTimings    720 725 730 750
    Flags  "+HSync" "+VSync"
  EndMode
  # Block type: 2:0 3:fc
  # Block type: 2:0 3:fd
EndSection

Section "Screen"
  Identifier  "LCD"
  Device     "intel"
  Monitor    "TX-SR606"
#  Option    "UseEDID" "False"
  Option    "UseEDIDDpi"  "FALSE"
  Option    "DPI" "96 x 96"
  DefaultDepth 24
  SubSection "Display"
    Modes "1920x1080" "1280x720"
  EndSubSection
EndSection

Section "ServerFlags"
  Option  "DontZap"  "False"
EndSection

I would appreciate ANY help on getting this solved.

Thanks,
Freddie

Tags: None

Lorax

Junior Member

Join Date: Dec 2009

Posts: 10

Send PM
#2

Dec 20, 2009, 09:04 PM

Re: Huge Display/Graphics & Fonts

Wow, did you ever get a reply, brother? Go try LinuxQuestions.org. The regulars there have helped me immensely. Peace
Top

Bottom
Comment
iamme

Contributing Member

Join Date: Aug 2009

Posts: 30

Send PM
#3

Dec 29, 2009, 12:01 AM

Re: Huge Display/Graphics & Fonts

That's a lot of info bro
But my initial thought on seeing your post was - "probably its a device driver issue"
Have you been able to get it running fine with any other NIX OS ??
Also have you checked for updated device drivers from the vendor for LINUX ??

Jesus is Real &= GOD, unless you declare him an Integer.
Top

Bottom
Comment
Guest

Send PM
#4

Jan 31, 2010, 02:12 PM

Re: Huge Display/Graphics & Fonts

Better late than never, I suppose.

I just had this same problem with U-lite, except only the font was super large. I traced it back to the EDID, much like you did, and found this page:

Dot per Inch documentation

After reading it, I added the following line to the Screen section in /etc/X11/xorg.conf:

Code:

Option "UseEdidDpi" "FALSE"

Hopefully, if you haven't given up on this forum or getting this to work, you can give that a try and see if it works. It worked for me.
Top

Bottom
Comment
Snowhog

Ascendant

Join Date: Mar 2007

Posts: 22606

Location: Andover, MN

Send PM
#5

Jan 31, 2010, 02:39 PM

Re: Huge Display/Graphics & Fonts

You'll note, that in his xorg.conf he posted, he did try that:

Section "Screen"
Identifier "LCD"
Device "intel"
Monitor "TX-SR606"
# Option "UseEDID" "False"
Option "UseEDIDDpi" "FALSE"
Option "DPI" "96 x 96"
DefaultDepth 24
SubSection "Display"
Modes "1920x1080" "1280x720"
EndSubSection
EndSection

But note also, that the mixed case isn't as you suggested, so maybe...

Using Kubuntu Linux since March 23, 2007
"It is a capital mistake to theorize before one has data." - Sherlock Holmes
Top

Bottom
Comment

Previous template Next

Announcement

Huge Display/Graphics & Fonts

Huge Display/Graphics & Fonts

Comment

Comment

Comment

Comment