Announcement

Collapse
No announcement yet.

Monitor ???

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Monitor ???

    I am new with Kubuntu 64bit...
    I have installed my g-card but i can select my monitor..
    so i cant get the right hz or size...
    i have a Samsung SyncMaster 1200NF
    Cane anyone help me?
    Tags: None
    • Top
    • Bottom
    #2
    Re: Monitor

    which video card are you using?
    usually you don't have to select any certain monitor type.
    &quot;Either you repeat the same conventional doctrines everybody is saying, or else you say something true, and it will sound like it&#39;s from Neptune.&quot; ~Noam Chomsky<br /><br />Gigabyte MB, AMD 64x2 6000, 2 Gigs Patriot DDR2, XFX GeForce 8600GT XXX, 400Gig WD SATA HDD &amp; 1TB WD SATA HDD.
    • Top
    • Bottom

    Comment

      #3
      Re: Monitor

      Originally posted by CVPunk
      which video card are you using?
      usually you don't have to select any certain monitor type.
      im using Asus Gforce 9800GTX+
      • Top
      • Bottom

      Comment

        #4
        Re: Monitor

        did you install the Nvidia driver??
        &quot;Either you repeat the same conventional doctrines everybody is saying, or else you say something true, and it will sound like it&#39;s from Neptune.&quot; ~Noam Chomsky<br /><br />Gigabyte MB, AMD 64x2 6000, 2 Gigs Patriot DDR2, XFX GeForce 8600GT XXX, 400Gig WD SATA HDD &amp; 1TB WD SATA HDD.
        • Top
        • Bottom

        Comment

          #5
          Re: Monitor

          Originally posted by CVPunk
          did you install the Nvidia driver??
          The one kubuntu suggested...
          • Top
          • Bottom

          Comment

            #6
            Re: Monitor

            ok, so with the card you have I am assuming you downloaded and installed the 177 driver?
            In System Settings >Display are you able to select the size under Size & Orientation?
            &quot;Either you repeat the same conventional doctrines everybody is saying, or else you say something true, and it will sound like it&#39;s from Neptune.&quot; ~Noam Chomsky<br /><br />Gigabyte MB, AMD 64x2 6000, 2 Gigs Patriot DDR2, XFX GeForce 8600GT XXX, 400Gig WD SATA HDD &amp; 1TB WD SATA HDD.
            • Top
            • Bottom

            Comment

              #7
              Re: Monitor

              Originally posted by CVPunk
              OK, so with the card you have I am assuming you downloaded and installed the 177 driver?
              In System Settings >Display are you able to select the size under Size & Orientation?
              i did that but i couldn't size More then 1152x864 (50Hz)
              • Top
              • Bottom

              Comment

                #8
                Re: Monitor

                now i got a error...

                Application: KMix (kmix), signal SIGABRT
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                [Thread debugging using libthread_db enabled]
                [New Thread 0x7f87ac7cf6f0 (LWP 6254)]
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                (no debugging symbols found)
                [KCrash handler]
                #5 0x00007f87ac03cfd5 in raise () from /lib/libc.so.6
                #6 0x00007f87ac03eb43 in abort () from /lib/libc.so.6
                #7 0x00007f87aad0d6b5 in qt_message_output () from /usr/lib/libQtCore.so.4
                #8 0x00007f87aad0d7fd in qFatal () from /usr/lib/libQtCore.so.4
                #9 0x00007f87ab566363 in ?? () from /usr/lib/libsolid.so.4
                #10 0x00007f87ab566677 in ?? () from /usr/lib/libsolid.so.4
                #11 0x00007f87aae12134 in QMetaObject::activate ()
                from /usr/lib/libQtCore.so.4
                #12 0x00007f87ab575d02 in ?? () from /usr/lib/libsolid.so.4
                #13 0x00007f87ab5988ac in ?? () from /usr/lib/libsolid.so.4
                #14 0x00007f87aaa5dea3 in ?? () from /usr/lib/libQtDBus.so.4
                #15 0x00007f87aaa64eef in ?? () from /usr/lib/libQtDBus.so.4
                #16 0x00007f87aae0cda5 in QObject::event () from /usr/lib/libQtCore.so.4
                #17 0x00007f87a9e68c3d in QApplicationPrivate::notify_helper ()
                from /usr/lib/libQtGui.so.4
                #18 0x00007f87a9e709ea in QApplication::notify () from /usr/lib/libQtGui.so.4
                #19 0x00007f87abc31b8b in KApplication::notify () from /usr/lib/libkdeui.so.5
                #20 0x00007f87aadfdd61 in QCoreApplication::notifyInternal ()
                from /usr/lib/libQtCore.so.4
                #21 0x00007f87aadfe9fa in QCoreApplicationPrivate::sendPostedEvents ()
                from /usr/lib/libQtCore.so.4
                #22 0x00007f87aae264d3 in ?? () from /usr/lib/libQtCore.so.4
                #23 0x00007f87a74c4d3b in g_main_context_dispatch ()
                from /usr/lib/libglib-2.0.so.0
                #24 0x00007f87a74c850d in ?? () from /usr/lib/libglib-2.0.so.0
                #25 0x00007f87a74c86cb in g_main_context_iteration ()
                from /usr/lib/libglib-2.0.so.0
                #26 0x00007f87aae2615f in QEventDispatcherGlib:rocessEvents ()
                from /usr/lib/libQtCore.so.4
                #27 0x00007f87a9efaa9f in ?? () from /usr/lib/libQtGui.so.4
                #28 0x00007f87aadfc682 in QEventLoop:rocessEvents ()
                from /usr/lib/libQtCore.so.4
                #29 0x00007f87aadfc80d in QEventLoop::exec () from /usr/lib/libQtCore.so.4
                #30 0x00007f87aadfecbd in QCoreApplication::exec ()
                from /usr/lib/libQtCore.so.4
                #31 0x00007f87ac39852a in kdemain () from /usr/lib/libkdeinit4_kmix.so
                #32 0x00007f87ac028466 in __libc_start_main () from /lib/libc.so.6
                #33 0x0000000000400659 in _start ()
                #0 0x00007f87ac0b25f0 in nanosleep () from /lib/libc.so.6
                • Top
                • Bottom

                Comment

                  #9
                  Re: Monitor

                  If you are using a CRT screen, then you need to use gtf to get the right size + Hz combo. For me this would be:
                  Code:
                  HX@Sphere:~$ gtf 1024 768 85

 # 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
 Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync

HX@Sphere:~$
                  (With 85 being 85hz in my case. and 1024 768 the resolution)

                  And then add the resolution info to your xorg.conf (located in /etc/X11/xorg.conf)
                  Code:
                  Section "Monitor"
	Identifier	"Configured Monitor"
# 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
 Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
	SubSection "Display"
		Depth 24
		Modes "1024x768_85.00"
	EndSubSection
EndSection
                  Please note that setting wrong monitor settings can physically damage the monitor, so you must be 100% sure that your screen supports it.

                  Some LCD screens don't do refresh rates >60Hz (not needed with those anyway). In that case you would skip the modeline part and just use Modes "1024x768", without the _85.00 part.

                  It would also make sense to use a driver that supports 3D acceleration...so that you can use Desktop Effects. (To test it type glxinfo | grep direct into a Konsole window).

                  Hope this helps...took me a while to figure it out.

                  The Kmix thing is connected to sound. I get the same thing. I'm ignoring it cause it doesn't seem to have much actual effect when it crashes.
                  • Top
                  • Bottom

                  Comment

                    #10
                    Re: Monitor

                    Originally posted by HavocXphere
                    If you are using a CRT screen, then you need to use gtf to get the right size + Hz combo. For me this would be:
                    Code:
                    HX@Sphere:~$ gtf 1024 768 85

 # 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
 Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync

HX@Sphere:~$
                    (With 85 being 85hz in my case. and 1024 768 the resolution)

                    And then add the resolution info to your xorg.conf (located in /etc/X11/xorg.conf)
                    Code:
                    Section "Monitor"
	Identifier	"Configured Monitor"
# 1024x768 @ 85.00 Hz (GTF) hsync: 68.60 kHz; pclk: 94.39 MHz
 Modeline "1024x768_85.00" 94.39 1024 1088 1200 1376 768 769 772 807 -HSync +Vsync
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
	SubSection "Display"
		Depth 24
		Modes "1024x768_85.00"
	EndSubSection
EndSection
                    Please note that setting wrong monitor settings can physically damage the monitor, so you must be 100% sure that your screen supports it.

                    Some LCD screens don't do refresh rates >60Hz (not needed with those anyway). In that case you would skip the modeline part and just use Modes "1024x768", without the _85.00 part.

                    It would also make sense to use a driver that supports 3D acceleration...so that you can use Desktop Effects. (To test it type glxinfo | grep direct into a Konsole window).

                    Hope this helps...took me a while to figure it out.

                    The Kmix thing is connected to sound. I get the same thing. I'm ignoring it cause it doesn't seem to have much actual effect when it crashes.
                    IT WORKT TX

                    i used the 177 drivers and then i typed gtf 1600 1200 85
                    Then pasted it and replaset the v+g hz with my monitors hz and then i could change hz and size in nvidia config
                    • Top
                    • Bottom

                    Comment

                      #11
                      Re: Monitor

                      i more small thing....

                      Can you please check /etc/hosts to see if your hostname maps to 127.0.x.x ?

                      is it my ip by router? 192.168.1.2
                      or my won ip? (the ip peapol connect to me)
                      • Top
                      • Bottom

                      Comment

                        #12
                        Re: Monitor

                        Glad it helped.

                        127.0.0.1 localhost
                        127.0.1.1 Sphere
                        The top one is always localhost, the bottom one will refer to the name of you PC, i.e. its not your username.
                        • Top
                        • Bottom

                        Comment

                          #13
                          Re: Monitor

                          Originally posted by HavocXphere
                          Glad it helped.

                          127.0.0.1 localhost
                          127.0.1.1 Sphere
                          The top one is always localhost, the bottom one will refer to the name of you PC, i.e. its not your username.
                          how do i see if my hostname maps to 127.0.x.x ?
                          and what chod 127.0.x.x be?
                          • Top
                          • Bottom

                          Comment

                            #14
                            Re: Monitor

                            Originally posted by TheRazer
                            how do i see if my hostname maps to 127.0.x.x ?
                            and what chod 127.0.x.x be?
                            Your hostname maps to your network IP from an external box. The 127.0.X.X is the loopback address.

                            i.e. From a remote windows back "ping TheRazer" will give some IP (192.168.1.64), but if you ping your own box from kubuntu it will give the loopback address (127.0.1.1)
                            • Top
                            • Bottom

                            Comment

                            Previous template Next

                            Users Viewing This Topic

                            Collapse

                            There are 0 users viewing this topic.

                            Working...
                            X