Announcement

Collapse
No announcement yet.

Portable hard drive not being mounted

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Portable hard drive not being mounted

    Hi,

    I have an external 8TB HDD which is formatted to NTFS. I have just wiped Windows from the SSD of my Desktop and installed the LTS 18.04 and it is seeing my 8TB HDD but it can't seem to mount it. If I click on it in Dolphin nothing happens and there's no option to mount it. If I go into the Disk Manager software again, it sees it, but gives me no option to mount it. Any ideas?

    Thanks!

    edit - went into settings > hardware > removable devices and told it to mount and boot and to do it automatically...still wouldn't mount it. Rebooted, seems fine! Just one more problem to sort now (another thread impending!)
    Last edited by CanyonRoss; Sep 03, 2019, 01:30 PM.

    #2
    Before you connect the drive next time, open a konsole, then plug in the drive, and immediately enter
    Code:
    dmesg
    and see if it shows up as /dev/sdX (where X = any letter, normally the next letter after your permanent drives). So if your system normally boots just one drive, and it is /dev/sda(1,2,3,etc.), the plugged in USB should be /dev/sdb(1,2,3,etc.). And if you have 4 drives (/dev/sda - /dev/sdd), then plugging in the USB drive would be /dev/sde.

    Just start with that and see what your system tells you. The NTFS filesystem may be an issue that could affect that logic, but let's just look at it first.
    The next brick house on the left
    Intel i7 11th Gen | 16GB | 1TB | KDE Plasma 5.27.11​| Kubuntu 24.04 | 6.8.0-31-generic



    Comment


      #3
      Thank you, I have just done that and the output is huge! The device still isn't mounting properly unfortunately. Here we go...!

      Code:
      [FONT=monospace][COLOR=#18B218][    0.315593] [/COLOR][COLOR=#B26818]pci 0000:00:09.0[/COLOR]:   bridge window [mem 0xda100000-0xd
      a1fffff 64bit pref]
      [COLOR=#18B218][    0.315633] [/COLOR][COLOR=#B26818]pci 0000:04:00.0[/COLOR]: [1b6f:7023] type 00 class 0x0c0330
      [COLOR=#18B218][    0.315654] [/COLOR][COLOR=#B26818]pci 0000:04:00.0[/COLOR]: reg 0x10: [mem 0xfe200000-0xfe207ff
      f 64bit]
      [COLOR=#18B218][    0.315690] [/COLOR][COLOR=#B26818]pci 0000:04:00.0[/COLOR]: enabling Extended Tags
      [COLOR=#18B218][    0.315734] [/COLOR][COLOR=#B26818]pci 0000:04:00.0[/COLOR]: supports D1 D2
      [COLOR=#18B218][    0.315735] [/COLOR][COLOR=#B26818]pci 0000:04:00.0[/COLOR]: PME# supported from D0 D1 D2 D3hot 
      D3cold
      [COLOR=#18B218][    0.327586] [/COLOR][COLOR=#B26818]pci 0000:00:0a.0[/COLOR]: PCI bridge to [bus 04]
      [COLOR=#18B218][    0.327589] [/COLOR][COLOR=#B26818]pci 0000:00:0a.0[/COLOR]:   bridge window [mem 0xfe200000-0xf
      e2fffff]
      [COLOR=#18B218][    0.327600] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: extended config space not accessible
      [COLOR=#18B218][    0.327641] [/COLOR][COLOR=#B26818]pci 0000:05:0e.0[/COLOR]: [1106:3044] type 00 class 0x0c0010
      [COLOR=#18B218][    0.327657] [/COLOR][COLOR=#B26818]pci 0000:05:0e.0[/COLOR]: reg 0x10: [mem 0xfe100000-0xfe1007f
      f]
      [COLOR=#18B218][    0.327665] [/COLOR][COLOR=#B26818]pci 0000:05:0e.0[/COLOR]: reg 0x14: [io  0xc000-0xc07f]
      [COLOR=#18B218][    0.327730] [/COLOR][COLOR=#B26818]pci 0000:05:0e.0[/COLOR]: supports D2
      [COLOR=#18B218][    0.327731] [/COLOR][COLOR=#B26818]pci 0000:05:0e.0[/COLOR]: PME# supported from D2 D3hot D3cold
      [COLOR=#18B218][    0.327789] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]: PCI bridge to [bus 05] (subtractive
      decode)
      [COLOR=#18B218][    0.327792] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0xc000-0xcfff]
      [COLOR=#18B218][    0.327795] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [mem 0xfe100000-0xf
      e1fffff]
      [COLOR=#18B218][    0.327799] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0x0000-0x03af 
      window] (subtractive decode)
      [COLOR=#18B218][    0.327800] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0x03e0-0x0cf7 
      window] (subtractive decode)
      [COLOR=#18B218][    0.327801] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0x03b0-0x03df 
      window] (subtractive decode)
      [COLOR=#18B218][    0.327802] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0x0d00-0xffff 
      window] (subtractive decode)
      [COLOR=#18B218][    0.327803] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [mem 0x000a0000-0x0
      00bffff window] (subtractive decode)
      [COLOR=#18B218][    0.327804] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [mem 0x000c0000-0x0
      00dffff window] (subtractive decode)
      [COLOR=#18B218][    0.327805] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [mem 0xd0000000-0xf
      fffffff window] (subtractive decode)
      [COLOR=#18B218][    0.328333] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15
      ) *0
      [COLOR=#18B218][    0.328415] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15
      ) *0
      [COLOR=#18B218][    0.328498] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15
      ) *0
      [COLOR=#18B218][    0.328581] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15
      ) *0
      [COLOR=#18B218][    0.328651] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) 
      *0
      [COLOR=#18B218][    0.328703] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) 
      *0
      [COLOR=#18B218][    0.328755] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) 
      *0
      [COLOR=#18B218][    0.328808] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) 
      *0
      [COLOR=#18B218][    0.328975] [/COLOR]SCSI subsystem initialized
      [COLOR=#18B218][    0.328975] [/COLOR]libata version 3.00 loaded.
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]pci 0000:01:00.0[/COLOR]: vgaarb: setting as boot VGA device
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]pci 0000:01:00.0[/COLOR]: vgaarb: VGA device added: decodes=i
      o+mem,owns=io+mem,locks=none
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]pci 0000:01:00.0[/COLOR]: vgaarb: bridge control possible
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]vgaarb[/COLOR]: loaded
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: bus type USB registered
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new interface driver usbfs
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new interface driver hub
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new device driver usb
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]pps_core[/COLOR]: LinuxPPS API ver.
      
      1 registered
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]pps_core[/COLOR]: Software ver. 
      
      5.3.6 - Copyright 2005-2007 R
      odolfo Giometti <giometti@linux.it>
      [COLOR=#18B218][    0.328975] [/COLOR]PTP clock support registered
      [COLOR=#18B218][    0.328975] [/COLOR][COLOR=#B26818]EDAC MC[/COLOR]: Ver: 3.0.0
      [COLOR=#18B218][    0.328975] [/COLOR]Registered efivars operations
      [COLOR=#18B218][    0.331638] [/COLOR][COLOR=#B26818]PCI[/COLOR]: Using ACPI for IRQ routing
      [COLOR=#18B218][    0.340969] [/COLOR][COLOR=#B26818]PCI[/COLOR]: pci_cache_line_size set to 64 bytes
      [COLOR=#18B218][    0.341019] [/COLOR][COLOR=#B26818]e820[/COLOR]: reserve RAM buffer [mem 0xce47f000-0xcfffffff]
      [COLOR=#18B218][    0.341021] [/COLOR][COLOR=#B26818]e820[/COLOR]: reserve RAM buffer [mem 0xcf158000-0xcfffffff]
      [COLOR=#18B218][    0.341022] [/COLOR][COLOR=#B26818]e820[/COLOR]: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
      [COLOR=#18B218][    0.341022] [/COLOR][COLOR=#B26818]e820[/COLOR]: reserve RAM buffer [mem 0x22f000000-0x22fffffff
      ]
      [COLOR=#18B218][    0.341116] [/COLOR][COLOR=#B26818]NetLabel[/COLOR]: Initializing
      [COLOR=#18B218][    0.341116] [/COLOR][COLOR=#B26818]NetLabel[/COLOR]:  domain hash size = 128
      [COLOR=#18B218][    0.341117] [/COLOR][COLOR=#B26818]NetLabel[/COLOR]:  protocols = UNLABELED CIPSOv4 CALIPSO
      [COLOR=#18B218][    0.341128] [/COLOR][COLOR=#B26818]NetLabel[/COLOR]:  unlabeled traffic allowed by default
      [COLOR=#18B218][    0.341148] [/COLOR][COLOR=#B26818]hpet0[/COLOR]: at MMIO 0xfed00000, IRQs 2, 8, 0
      [COLOR=#18B218][    0.341148] [/COLOR][COLOR=#B26818]hpet0[/COLOR]: 3 comparators, 32-bit 14.318180 MHz counter
      [COLOR=#18B218][    0.343573] [/COLOR][COLOR=#B26818]clocksource[/COLOR]: Switched to clocksource tsc-early
      [COLOR=#18B218][    0.357115] [/COLOR][COLOR=#B26818]VFS[/COLOR]: Disk quotas dquot_6.6.0
      [COLOR=#18B218][    0.357131] [/COLOR][COLOR=#B26818]VFS[/COLOR]: Dquot-cache hash table entries: 512 (order 0, 40
      96 bytes)
      [COLOR=#18B218][    0.357245] [/COLOR][COLOR=#B26818]AppArmor[/COLOR]: AppArmor Filesystem Enabled
      [COLOR=#18B218][    0.357273] [/COLOR][COLOR=#B26818]pnp[/COLOR]: PnP ACPI init
      [COLOR=#18B218][    0.357404] [/COLOR][COLOR=#B26818]system 00:00[/COLOR]: [mem 0xe0000000-0xefffffff] has been re
      served
      [COLOR=#18B218][    0.357409] [/COLOR][COLOR=#B26818]system 00:00[/COLOR]: Plug and Play ACPI device, IDs PNP0c01 
      (active)
      [COLOR=#18B218][    0.357728] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x040b] has been reserved
      [COLOR=#18B218][    0.357729] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x04d6] has been reserved
      [COLOR=#18B218][    0.357730] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c00-0x0c01] has been reserved
      [COLOR=#18B218][    0.357731] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c14] has been reserved
      [COLOR=#18B218][    0.357732] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c50-0x0c51] has been reserved
      [COLOR=#18B218][    0.357734] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c52] has been reserved
      [COLOR=#18B218][    0.357735] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c6c] has been reserved
      [COLOR=#18B218][    0.357736] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0c6f] has been reserved
      [COLOR=#18B218][    0.357737] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0cd0-0x0cd1] has been reserved
      [COLOR=#18B218][    0.357738] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0cd2-0x0cd3] has been reserved
      [COLOR=#18B218][    0.357739] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0cd4-0x0cd5] has been reserved
      [COLOR=#18B218][    0.357740] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0cd6-0x0cd7] has been reserved
      [COLOR=#18B218][    0.357741] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0cd8-0x0cdf] has been reserved
      [COLOR=#18B218][    0.357742] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0800-0x089f] has been reserved
      [COLOR=#18B218][    0.357743] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0b20-0x0b3f] has been reserved
      [COLOR=#18B218][    0.357745] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0900-0x090f] has been reserved
      [COLOR=#18B218][    0.357746] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0x0910-0x091f] has been reserved
      [COLOR=#18B218][    0.357747] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [io  0xfe00-0xfefe] has been reserved
      [COLOR=#18B218][    0.357749] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfec00000-0xfec00fff] could not b
      e reserved
      [COLOR=#18B218][    0.357750] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfee00000-0xfee00fff] has been re
      served
      [COLOR=#18B218][    0.357752] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfed80000-0xfed8ffff] has been re
      served
      [COLOR=#18B218][    0.357753] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfed61000-0xfed70fff] has been re
      served
      [COLOR=#18B218][    0.357755] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfec10000-0xfec10fff] has been re
      served
      [COLOR=#18B218][    0.357756] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xfed00000-0xfed00fff] could not b
      e reserved
      [COLOR=#18B218][    0.357758] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: [mem 0xffc00000-0xffffffff] has been re
      served
      [COLOR=#18B218][    0.357761] [/COLOR][COLOR=#B26818]system 00:01[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.357947] [/COLOR][COLOR=#B26818]system 00:02[/COLOR]: [io  0x0220-0x0227] has been reserved
      [COLOR=#18B218][    0.357948] [/COLOR][COLOR=#B26818]system 00:02[/COLOR]: [io  0x0228-0x0237] has been reserved
      [COLOR=#18B218][    0.357949] [/COLOR][COLOR=#B26818]system 00:02[/COLOR]: [io  0x0a20-0x0a2f] has been reserved
      [COLOR=#18B218][    0.357953] [/COLOR][COLOR=#B26818]system 00:02[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.358270] [/COLOR][COLOR=#B26818]pnp 00:03[/COLOR]: [dma 0 disabled]
      [COLOR=#18B218][    0.358312] [/COLOR][COLOR=#B26818]pnp 00:03[/COLOR]: Plug and Play ACPI device, IDs PNP0501 (ac
      tive)
      [COLOR=#18B218][    0.358339] [/COLOR][COLOR=#B26818]pnp 00:04[/COLOR]: Plug and Play ACPI device, IDs PNP0b00 (ac
      tive)
      [COLOR=#18B218][    0.358398] [/COLOR][COLOR=#B26818]system 00:05[/COLOR]: [io  0x04d0-0x04d1] has been reserved
      [COLOR=#18B218][    0.358401] [/COLOR][COLOR=#B26818]system 00:05[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.358446] [/COLOR][COLOR=#B26818]system 00:06[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.358596] [/COLOR][COLOR=#B26818]system 00:07[/COLOR]: [mem 0xfeb20000-0xfeb23fff] could not b
      e reserved
      [COLOR=#18B218][    0.358599] [/COLOR][COLOR=#B26818]system 00:07[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.358723] [/COLOR][COLOR=#B26818]system 00:08[/COLOR]: [mem 0xfec20000-0xfec200ff] could not b
      e reserved
      [COLOR=#18B218][    0.358727] [/COLOR][COLOR=#B26818]system 00:08[/COLOR]: Plug and Play ACPI device, IDs PNP0c02 
      (active)
      [COLOR=#18B218][    0.358858] [/COLOR][COLOR=#B26818]pnp[/COLOR]: PnP ACPI: found 9 devices
      [COLOR=#18B218][    0.364982] [/COLOR][COLOR=#B26818]clocksource[/COLOR]: acpi_pm: mask: 0xffffff max_cycles: 0xff
      ffff, max_idle_ns: 2085701024 ns
      [COLOR=#18B218][    0.365002] [/COLOR][COLOR=#B26818]pci 0000:00:02.0[/COLOR]: PCI bridge to [bus 01]
      [COLOR=#18B218][    0.365004] [/COLOR][COLOR=#B26818]pci 0000:00:02.0[/COLOR]:   bridge window [io  0xe000-0xefff]
      [COLOR=#18B218][    0.365006] [/COLOR][COLOR=#B26818]pci 0000:00:02.0[/COLOR]:   bridge window [mem 0xfd000000-0xf
      e0fffff]
      [COLOR=#18B218][    0.365008] [/COLOR][COLOR=#B26818]pci 0000:00:02.0[/COLOR]:   bridge window [mem 0xd0000000-0xd
      9ffffff 64bit pref]
      [COLOR=#18B218][    0.365011] [/COLOR][COLOR=#B26818]pci 0000:00:04.0[/COLOR]: PCI bridge to [bus 02]
      [COLOR=#18B218][    0.365013] [/COLOR][COLOR=#B26818]pci 0000:00:04.0[/COLOR]:   bridge window [mem 0xfe300000-0xf
      e3fffff]
      [COLOR=#18B218][    0.365016] [/COLOR][COLOR=#B26818]pci 0000:00:09.0[/COLOR]: PCI bridge to [bus 03]
      [COLOR=#18B218][    0.365017] [/COLOR][COLOR=#B26818]pci 0000:00:09.0[/COLOR]:   bridge window [io  0xd000-0xdfff]
      [COLOR=#18B218][    0.365020] [/COLOR][COLOR=#B26818]pci 0000:00:09.0[/COLOR]:   bridge window [mem 0xda100000-0xd
      a1fffff 64bit pref]
      [COLOR=#18B218][    0.365022] [/COLOR][COLOR=#B26818]pci 0000:00:0a.0[/COLOR]: PCI bridge to [bus 04]
      [COLOR=#18B218][    0.365024] [/COLOR][COLOR=#B26818]pci 0000:00:0a.0[/COLOR]:   bridge window [mem 0xfe200000-0xf
      e2fffff]
      [COLOR=#18B218][    0.365027] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]: PCI bridge to [bus 05]
      [COLOR=#18B218][    0.365029] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [io  0xc000-0xcfff]
      [COLOR=#18B218][    0.365032] [/COLOR][COLOR=#B26818]pci 0000:00:14.4[/COLOR]:   bridge window [mem 0xfe100000-0xf
      e1fffff]
      [COLOR=#18B218][    0.365039] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 4 [io  0x0000-0x03af window
      ]
      [COLOR=#18B218][    0.365040] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 5 [io  0x03e0-0x0cf7 window
      ]
      [COLOR=#18B218][    0.365041] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 6 [io  0x03b0-0x03df window
      ]
      [COLOR=#18B218][    0.365042] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 7 [io  0x0d00-0xffff window
      ]
      [COLOR=#18B218][    0.365043] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 8 [mem 0x000a0000-0x000bfff
      f window]
      [COLOR=#18B218][    0.365044] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 9 [mem 0x000c0000-0x000dfff
      f window]
      [COLOR=#18B218][    0.365045] [/COLOR][COLOR=#B26818]pci_bus 0000:00[/COLOR]: resource 10 [mem 0xd0000000-0xffffff
      ff window]
      [COLOR=#18B218][    0.365047] [/COLOR][COLOR=#B26818]pci_bus 0000:01[/COLOR]: resource 0 [io  0xe000-0xefff]
      [COLOR=#18B218][    0.365047] [/COLOR][COLOR=#B26818]pci_bus 0000:01[/COLOR]: resource 1 [mem 0xfd000000-0xfe0ffff
      f]
      [COLOR=#18B218][    0.365048] [/COLOR][COLOR=#B26818]pci_bus 0000:01[/COLOR]: resource 2 [mem 0xd0000000-0xd9fffff
      f 64bit pref]
      [COLOR=#18B218][    0.365050] [/COLOR][COLOR=#B26818]pci_bus 0000:02[/COLOR]: resource 1 [mem 0xfe300000-0xfe3ffff
      f]
      [COLOR=#18B218][    0.365051] [/COLOR][COLOR=#B26818]pci_bus 0000:03[/COLOR]: resource 0 [io  0xd000-0xdfff]
      [COLOR=#18B218][    0.365052] [/COLOR][COLOR=#B26818]pci_bus 0000:03[/COLOR]: resource 2 [mem 0xda100000-0xda1ffff
      f 64bit pref]
      [COLOR=#18B218][    0.365053] [/COLOR][COLOR=#B26818]pci_bus 0000:04[/COLOR]: resource 1 [mem 0xfe200000-0xfe2ffff
      f]
      [COLOR=#18B218][    0.365054] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 0 [io  0xc000-0xcfff]
      [COLOR=#18B218][    0.365055] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 1 [mem 0xfe100000-0xfe1ffff
      f]
      [COLOR=#18B218][    0.365055] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 4 [io  0x0000-0x03af window
      ]
      [COLOR=#18B218][    0.365056] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 5 [io  0x03e0-0x0cf7 window
      ]
      [COLOR=#18B218][    0.365057] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 6 [io  0x03b0-0x03df window
      ]
      [COLOR=#18B218][    0.365058] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 7 [io  0x0d00-0xffff window
      ]
      [COLOR=#18B218][    0.365059] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 8 [mem 0x000a0000-0x000bfff
      f window]
      [COLOR=#18B218][    0.365060] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 9 [mem 0x000c0000-0x000dfff
      f window]
      [COLOR=#18B218][    0.365061] [/COLOR][COLOR=#B26818]pci_bus 0000:05[/COLOR]: resource 10 [mem 0xd0000000-0xffffff
      ff window]
      [COLOR=#18B218][    0.365127] [/COLOR][COLOR=#B26818]NET[/COLOR]: Registered protocol family 2
      [COLOR=#18B218][    0.365265] [/COLOR][COLOR=#B26818]tcp_listen_portaddr_hash hash table entries[/COLOR]: 4096 (or
      der: 4, 65536 bytes)
      [COLOR=#18B218][    0.365302] [/COLOR][COLOR=#B26818]TCP established hash table entries[/COLOR]: 65536 (order: 7, 
      524288 bytes)
      [COLOR=#18B218][    0.365480] [/COLOR][COLOR=#B26818]TCP bind hash table entries[/COLOR]: 65536 (order: 8, 1048576
      bytes)
      [COLOR=#18B218][    0.365747] [/COLOR][COLOR=#B26818]TCP[/COLOR]: Hash tables configured (established 65536 bind 6
      5536)
      [COLOR=#18B218][    0.365798] [/COLOR][COLOR=#B26818]UDP hash table entries[/COLOR]: 4096 (order: 5, 131072 bytes)
      [COLOR=#18B218][    0.365838] [/COLOR][COLOR=#B26818]UDP-Lite hash table entries[/COLOR]: 4096 (order: 5, 131072 b
      ytes)
      [COLOR=#18B218][    0.365932] [/COLOR][COLOR=#B26818]NET[/COLOR]: Registered protocol family 1
      [COLOR=#18B218][    0.365937] [/COLOR][COLOR=#B26818]NET[/COLOR]: Registered protocol family 44
      [COLOR=#18B218][    0.399928] [/COLOR][COLOR=#B26818]pci 0000:00:12.0[/COLOR]: quirk_usb_early_handoff+0x0/0x6a0 t
      ook 33175 usecs
      [COLOR=#18B218][    0.431920] [/COLOR][COLOR=#B26818]pci 0000:00:13.0[/COLOR]: quirk_usb_early_handoff+0x0/0x6a0 t
      ook 31121 usecs
      [COLOR=#18B218][    0.463919] [/COLOR][COLOR=#B26818]pci 0000:00:14.5[/COLOR]: quirk_usb_early_handoff+0x0/0x6a0 t
      ook 31120 usecs
      [COLOR=#18B218][    0.495918] [/COLOR][COLOR=#B26818]pci 0000:00:16.0[/COLOR]: quirk_usb_early_handoff+0x0/0x6a0 t
      ook 31243 usecs
      [COLOR=#18B218][    0.496055] [/COLOR][COLOR=#B26818]pci 0000:01:00.0[/COLOR]: Video device with shadowed ROM at [
      mem 0x000c0000-0x000dffff]
      [COLOR=#18B218][    0.496066] [/COLOR][COLOR=#B26818]pci 0000:01:00.1[/COLOR]: Linked as a consumer to 0000:01:00.
      0
      [COLOR=#18B218][    0.496346] [/COLOR][COLOR=#B26818]PCI[/COLOR]: CLS 64 bytes, default 64
      [COLOR=#18B218][    0.496376] [/COLOR]Unpacking initramfs...
      [COLOR=#18B218][    1.306932] [/COLOR][COLOR=#B26818]Freeing initrd memory[/COLOR]: 69092K
      [COLOR=#18B218][    1.307501] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:00.0 to group 0
      [COLOR=#18B218][    1.307602] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:02.0 to group 1
      [COLOR=#18B218][    1.307691] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:04.0 to group 2
      [COLOR=#18B218][    1.307774] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:09.0 to group 3
      [COLOR=#18B218][    1.307869] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:0a.0 to group 4
      [COLOR=#18B218][    1.307952] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:11.0 to group 5
      [COLOR=#18B218][    1.308062] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:12.0 to group 6
      [COLOR=#18B218][    1.308075] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:12.2 to group 6
      [COLOR=#18B218][    1.308170] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:13.0 to group 7
      [COLOR=#18B218][    1.308183] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:13.2 to group 7
      [COLOR=#18B218][    1.308270] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.0 to group 8
      [COLOR=#18B218][    1.308354] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.1 to group 9
      [COLOR=#18B218][    1.308434] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.2 to group 10
      [COLOR=#18B218][    1.308519] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.3 to group 11
      [COLOR=#18B218][    1.308601] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.4 to group 12
      [COLOR=#18B218][    1.308693] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:14.5 to group 13
      [COLOR=#18B218][    1.308786] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:16.0 to group 14
      [COLOR=#18B218][    1.308801] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:00:16.2 to group 14
      [COLOR=#18B218][    1.308904] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:01:00.0 to group 15
      [COLOR=#18B218][    1.308923] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:01:00.1 to group 15
      [COLOR=#18B218][    1.309014] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:02:00.0 to group 16
      [COLOR=#18B218][    1.309113] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:03:00.0 to group 17
      [COLOR=#18B218][    1.309201] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:04:00.0 to group 18
      [COLOR=#18B218][    1.309209] [/COLOR][COLOR=#B26818]iommu[/COLOR]: Adding device 0000:05:0e.0 to group 12
      [COLOR=#18B218][    1.346393] [/COLOR][COLOR=#B26818]AMD-Vi[/COLOR]: Found IOMMU at 0000:00:00.2 cap 0x40
      [COLOR=#18B218][    1.346394] [/COLOR][COLOR=#B26818]AMD-Vi[/COLOR]: Interrupt remapping enabled
      [COLOR=#18B218][    1.346483] [/COLOR][COLOR=#B26818]AMD-Vi[/COLOR]: Lazy IO/TLB flushing enabled
      [COLOR=#18B218][    1.348316] [/COLOR][COLOR=#B26818]amd_uncore[/COLOR]: AMD NB counters detected
      [COLOR=#18B218][    1.348431] [/COLOR]LVT offset 0 assigned for vector 0x400
      [COLOR=#18B218][    1.348483] [/COLOR][COLOR=#B26818]perf[/COLOR]: AMD IBS detected (0x000000ff)
      [COLOR=#18B218][    1.348522] [/COLOR][COLOR=#B26818]check[/COLOR]: Scanning for low memory corruption every 60 se
      conds
      [COLOR=#18B218][    1.350109] [/COLOR]Initialise system trusted keyrings
      [COLOR=#18B218][    1.350117] [/COLOR]Key type blacklist registered
      [COLOR=#18B218][    1.350170] [/COLOR][COLOR=#B26818]workingset[/COLOR]: timestamp_bits=36 max_order=21 bucket_ord
      er=0
      [COLOR=#18B218][    1.351598] [/COLOR][COLOR=#B26818]zbud[/COLOR]: loaded
      [COLOR=#18B218][    1.351981] [/COLOR][COLOR=#B26818]squashfs[/COLOR]: version 4.0 (2009/01/31) Phillip Lougher
      [COLOR=#18B218][    1.352188] [/COLOR]fuse init (API version 7.28)
      [COLOR=#18B218][    1.382284] [/COLOR]Key type asymmetric registered
      [COLOR=#18B218][    1.382285] [/COLOR]Asymmetric key parser 'x509' registered
      [COLOR=#18B218][    1.382295] [/COLOR]Block layer SCSI generic (bsg) driver version 0.4 loa
      ded (major 243)
      [COLOR=#18B218][    1.382343] [/COLOR]io scheduler mq-deadline registered
      [COLOR=#18B218][    1.382765] [/COLOR][COLOR=#B26818]shpchp[/COLOR]: Standard Hot Plug PCI Controller Driver versi
      on: 0.4
      [COLOR=#18B218][    1.382830] [/COLOR][COLOR=#B26818]efifb[/COLOR]: probing for efifb
      [COLOR=#18B218][    1.382861] [/COLOR][COLOR=#B26818]efifb[/COLOR]: framebuffer at 0xd9000000, using 3072k, total 
      3072k
      [COLOR=#18B218][    1.382863] [/COLOR][COLOR=#B26818]efifb[/COLOR]: mode is 1024x768x32, linelength=4096, pages=1
      [COLOR=#18B218][    1.382863] [/COLOR][COLOR=#B26818]efifb[/COLOR]: scrolling: redraw
      [COLOR=#18B218][    1.382865] [/COLOR][COLOR=#B26818]efifb[/COLOR]: Truecolor: size=8:8:8:8, shift=24:16:8:0
      [COLOR=#18B218][    1.382977] [/COLOR][COLOR=#B26818]Console[/COLOR]: switching to colour frame buffer device 128x
      48
      [COLOR=#18B218][    1.382991] [/COLOR][COLOR=#B26818]fb0[/COLOR]: EFI VGA frame buffer device
      [COLOR=#18B218][    1.383071] [/COLOR][COLOR=#B26818]input[/COLOR]: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:
      00/PNP0C0C:00/input/input0
      [COLOR=#18B218][    1.383083] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: Power Button [PWRB]
      [COLOR=#18B218][    1.383116] [/COLOR][COLOR=#B26818]input[/COLOR]: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:
      00/input/input1
      [COLOR=#18B218][    1.383122] [/COLOR][COLOR=#B26818]ACPI[/COLOR]: Power Button [PWRF]
      [COLOR=#18B218][    1.383749] [/COLOR][COLOR=#B26818]Serial[/COLOR]: 8250/16550 driver, 32 ports, IRQ sharing enab
      led
      [COLOR=#18B218][    1.404154] [/COLOR][COLOR=#B26818]00:03[/COLOR]: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 11520
      0) is a 16550A
      [COLOR=#18B218][    1.405736] [/COLOR]Linux agpgart interface v0.103
      [COLOR=#18B218][    1.408138] [/COLOR][COLOR=#B26818]loop[/COLOR]: module loaded
      [COLOR=#18B218][    1.408354] [/COLOR][COLOR=#B26818]libphy[/COLOR]: Fixed MDIO Bus: probed
      [COLOR=#18B218][    1.408355] [/COLOR][COLOR=#B26818]tun[/COLOR]: Universal TUN/TAP device driver, 1.6
      [COLOR=#18B218][    1.408384] [/COLOR]PPP generic driver version 2.4.2
      [COLOR=#18B218][    1.408418] [/COLOR][COLOR=#B26818]ehci_hcd[/COLOR]: USB 2.0 'Enhanced' Host Controller (EHCI) D
      river
      [COLOR=#18B218][    1.408420] [/COLOR][COLOR=#B26818]ehci-pci[/COLOR]: EHCI PCI platform driver
      [COLOR=#18B218][    1.408517] [/COLOR][COLOR=#B26818]QUIRK[/COLOR]: Enable AMD PLL fix
      [COLOR=#18B218][    1.408536] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: EHCI Host Controller
      [COLOR=#18B218][    1.408541] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: new USB bus registered, assign
      ed bus number 1
      [COLOR=#18B218][    1.408544] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: applying AMD SB700/SB800/Hudso
      n-2/3 EHCI dummy qh workaround
      [COLOR=#18B218][    1.408551] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: debug port 1
      [COLOR=#18B218][    1.408590] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: irq 17, io mem 0xfe409000
      [COLOR=#18B218][    1.423660] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:12.2[/COLOR]: USB 2.0 started, EHCI 1.00
      [COLOR=#18B218][    1.423781] [/COLOR][COLOR=#B26818]usb usb1[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0002, bcdDevice= 5.00
      [COLOR=#18B218][    1.423784] [/COLOR][COLOR=#B26818]usb usb1[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.423787] [/COLOR][COLOR=#B26818]usb usb1[/COLOR]: Product: EHCI Host Controller
      [COLOR=#18B218][    1.423790] [/COLOR][COLOR=#B26818]usb usb1[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ehci_h
      cd
      [COLOR=#18B218][    1.423792] [/COLOR][COLOR=#B26818]usb usb1[/COLOR]: SerialNumber: 0000:00:12.2
      [COLOR=#18B218][    1.423951] [/COLOR][COLOR=#B26818]hub 1-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.423957] [/COLOR][COLOR=#B26818]hub 1-0:1.0[/COLOR]: 5 ports detected
      [COLOR=#18B218][    1.424197] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: EHCI Host Controller
      [COLOR=#18B218][    1.424201] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: new USB bus registered, assign
      ed bus number 2
      [COLOR=#18B218][    1.424204] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: applying AMD SB700/SB800/Hudso
      n-2/3 EHCI dummy qh workaround
      [COLOR=#18B218][    1.424210] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: debug port 1
      [COLOR=#18B218][    1.424235] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: irq 17, io mem 0xfe407000
      [COLOR=#18B218][    1.439653] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:13.2[/COLOR]: USB 2.0 started, EHCI 1.00
      [COLOR=#18B218][    1.439761] [/COLOR][COLOR=#B26818]usb usb2[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0002, bcdDevice= 5.00
      [COLOR=#18B218][    1.439765] [/COLOR][COLOR=#B26818]usb usb2[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.439767] [/COLOR][COLOR=#B26818]usb usb2[/COLOR]: Product: EHCI Host Controller
      [COLOR=#18B218][    1.439770] [/COLOR][COLOR=#B26818]usb usb2[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ehci_h
      cd
      [COLOR=#18B218][    1.439772] [/COLOR][COLOR=#B26818]usb usb2[/COLOR]: SerialNumber: 0000:00:13.2
      [COLOR=#18B218][    1.439935] [/COLOR][COLOR=#B26818]hub 2-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.439940] [/COLOR][COLOR=#B26818]hub 2-0:1.0[/COLOR]: 5 ports detected
      [COLOR=#18B218][    1.440234] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: EHCI Host Controller
      [COLOR=#18B218][    1.440239] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: new USB bus registered, assign
      ed bus number 3
      [COLOR=#18B218][    1.440243] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: applying AMD SB700/SB800/Hudso
      n-2/3 EHCI dummy qh workaround
      [COLOR=#18B218][    1.440249] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: debug port 1
      [COLOR=#18B218][    1.440276] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: irq 17, io mem 0xfe404000
      [COLOR=#18B218][    1.455657] [/COLOR][COLOR=#B26818]ehci-pci 0000:00:16.2[/COLOR]: USB 2.0 started, EHCI 1.00
      [COLOR=#18B218][    1.455759] [/COLOR][COLOR=#B26818]usb usb3[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0002, bcdDevice= 5.00
      [COLOR=#18B218][    1.455763] [/COLOR][COLOR=#B26818]usb usb3[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.455766] [/COLOR][COLOR=#B26818]usb usb3[/COLOR]: Product: EHCI Host Controller
      [COLOR=#18B218][    1.455768] [/COLOR][COLOR=#B26818]usb usb3[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ehci_h
      cd
      [COLOR=#18B218][    1.455770] [/COLOR][COLOR=#B26818]usb usb3[/COLOR]: SerialNumber: 0000:00:16.2
      [COLOR=#18B218][    1.455936] [/COLOR][COLOR=#B26818]hub 3-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.455940] [/COLOR][COLOR=#B26818]hub 3-0:1.0[/COLOR]: 4 ports detected
      [COLOR=#18B218][    1.456144] [/COLOR][COLOR=#B26818]ehci-platform[/COLOR]: EHCI generic platform driver
      [COLOR=#18B218][    1.456170] [/COLOR][COLOR=#B26818]ohci_hcd[/COLOR]: USB 1.1 'Open' Host Controller (OHCI) Drive
      r
      [COLOR=#18B218][    1.456173] [/COLOR][COLOR=#B26818]ohci-pci[/COLOR]: OHCI PCI platform driver
      [COLOR=#18B218][    1.456270] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:12.0[/COLOR]: OHCI PCI host controller
      [COLOR=#18B218][    1.456274] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:12.0[/COLOR]: new USB bus registered, assign
      ed bus number 4
      [COLOR=#18B218][    1.456300] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:12.0[/COLOR]: irq 18, io mem 0xfe40a000
      [COLOR=#18B218][    1.519679] [/COLOR][COLOR=#B26818]usb usb4[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0001, bcdDevice= 5.00
      [COLOR=#18B218][    1.519680] [/COLOR][COLOR=#B26818]usb usb4[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.519681] [/COLOR][COLOR=#B26818]usb usb4[/COLOR]: Product: OHCI PCI host controller
      [COLOR=#18B218][    1.519682] [/COLOR][COLOR=#B26818]usb usb4[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ohci_h
      cd
      [COLOR=#18B218][    1.519683] [/COLOR][COLOR=#B26818]usb usb4[/COLOR]: SerialNumber: 0000:00:12.0
      [COLOR=#18B218][    1.519821] [/COLOR][COLOR=#B26818]hub 4-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.519828] [/COLOR][COLOR=#B26818]hub 4-0:1.0[/COLOR]: 5 ports detected
      [COLOR=#18B218][    1.520108] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:13.0[/COLOR]: OHCI PCI host controller
      [COLOR=#18B218][    1.520112] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:13.0[/COLOR]: new USB bus registered, assign
      ed bus number 5
      [COLOR=#18B218][    1.520134] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:13.0[/COLOR]: irq 18, io mem 0xfe408000
      [COLOR=#18B218][    1.583678] [/COLOR][COLOR=#B26818]usb usb5[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0001, bcdDevice= 5.00
      [COLOR=#18B218][    1.583679] [/COLOR][COLOR=#B26818]usb usb5[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.583680] [/COLOR][COLOR=#B26818]usb usb5[/COLOR]: Product: OHCI PCI host controller
      [COLOR=#18B218][    1.583681] [/COLOR][COLOR=#B26818]usb usb5[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ohci_h
      cd
      [COLOR=#18B218][    1.583682] [/COLOR][COLOR=#B26818]usb usb5[/COLOR]: SerialNumber: 0000:00:13.0
      [COLOR=#18B218][    1.583820] [/COLOR][COLOR=#B26818]hub 5-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.583827] [/COLOR][COLOR=#B26818]hub 5-0:1.0[/COLOR]: 5 ports detected
      [COLOR=#18B218][    1.584116] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:14.5[/COLOR]: OHCI PCI host controller
      [COLOR=#18B218][    1.584121] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:14.5[/COLOR]: new USB bus registered, assign
      ed bus number 6
      [COLOR=#18B218][    1.584139] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:14.5[/COLOR]: irq 18, io mem 0xfe406000
      [COLOR=#18B218][    1.647684] [/COLOR][COLOR=#B26818]usb usb6[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0001, bcdDevice= 5.00
      [COLOR=#18B218][    1.647685] [/COLOR][COLOR=#B26818]usb usb6[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.647686] [/COLOR][COLOR=#B26818]usb usb6[/COLOR]: Product: OHCI PCI host controller
      [COLOR=#18B218][    1.647687] [/COLOR][COLOR=#B26818]usb usb6[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ohci_h
      cd
      [COLOR=#18B218][    1.647688] [/COLOR][COLOR=#B26818]usb usb6[/COLOR]: SerialNumber: 0000:00:14.5
      [COLOR=#18B218][    1.647826] [/COLOR][COLOR=#B26818]hub 6-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.647832] [/COLOR][COLOR=#B26818]hub 6-0:1.0[/COLOR]: 2 ports detected
      [COLOR=#18B218][    1.648086] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:16.0[/COLOR]: OHCI PCI host controller
      [COLOR=#18B218][    1.648090] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:16.0[/COLOR]: new USB bus registered, assign
      ed bus number 7
      [COLOR=#18B218][    1.648107] [/COLOR][COLOR=#B26818]ohci-pci 0000:00:16.0[/COLOR]: irq 18, io mem 0xfe405000
      [COLOR=#18B218][    1.711677] [/COLOR][COLOR=#B26818]usb usb7[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0001, bcdDevice= 5.00
      [COLOR=#18B218][    1.711679] [/COLOR][COLOR=#B26818]usb usb7[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.711680] [/COLOR][COLOR=#B26818]usb usb7[/COLOR]: Product: OHCI PCI host controller
      [COLOR=#18B218][    1.711681] [/COLOR][COLOR=#B26818]usb usb7[/COLOR]: Manufacturer: Linux 5.0.0-27-generic ohci_h
      cd
      [COLOR=#18B218][    1.711681] [/COLOR][COLOR=#B26818]usb usb7[/COLOR]: SerialNumber: 0000:00:16.0
      [COLOR=#18B218][    1.711769] [/COLOR][COLOR=#B26818]hub 7-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.711776] [/COLOR][COLOR=#B26818]hub 7-0:1.0[/COLOR]: 4 ports detected
      [COLOR=#18B218][    1.711975] [/COLOR][COLOR=#B26818]ohci-platform[/COLOR]: OHCI generic platform driver
      [COLOR=#18B218][    1.711998] [/COLOR][COLOR=#B26818]uhci_hcd[/COLOR]: USB Universal Host Controller Interface dri
      ver
      [COLOR=#18B218][    1.712093] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: xHCI Host Controller
      [COLOR=#18B218][    1.712097] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: new USB bus registered, assign
      ed bus number 8
      [COLOR=#18B218][    1.712157] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: hcc params 0x040050af hci vers
      ion 0x100 quirks 0x0000000000080490
      [COLOR=#18B218][    1.712285] [/COLOR][COLOR=#B26818]usb usb8[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0002, bcdDevice= 5.00
      [COLOR=#18B218][    1.712286] [/COLOR][COLOR=#B26818]usb usb8[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.712287] [/COLOR][COLOR=#B26818]usb usb8[/COLOR]: Product: xHCI Host Controller
      [COLOR=#18B218][    1.712288] [/COLOR][COLOR=#B26818]usb usb8[/COLOR]: Manufacturer: Linux 5.0.0-27-generic xhci-h
      cd
      [COLOR=#18B218][    1.712289] [/COLOR][COLOR=#B26818]usb usb8[/COLOR]: SerialNumber: 0000:02:00.0
      [COLOR=#18B218][    1.712363] [/COLOR][COLOR=#B26818]hub 8-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.712370] [/COLOR][COLOR=#B26818]hub 8-0:1.0[/COLOR]: 2 ports detected
      [COLOR=#18B218][    1.712457] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: xHCI Host Controller
      [COLOR=#18B218][    1.712460] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: new USB bus registered, assign
      ed bus number 9
      [COLOR=#18B218][    1.712462] [/COLOR][COLOR=#B26818]xhci_hcd 0000:02:00.0[/COLOR]: Host supports USB 3.0  SuperSp
      eed
      [COLOR=#18B218][    1.712476] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: We don't know the algorithms for LPM for th
      is host, disabling LPM.
      [COLOR=#18B218][    1.712496] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: New USB device found, idVendor=1d6b, idProd
      uct=0003, bcdDevice= 5.00
      [COLOR=#18B218][    1.712497] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: New USB device strings: Mfr=3, Product=2, S
      erialNumber=1
      [COLOR=#18B218][    1.712498] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: Product: xHCI Host Controller
      [COLOR=#18B218][    1.712499] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: Manufacturer: Linux 5.0.0-27-generic xhci-h
      cd
      [COLOR=#18B218][    1.712500] [/COLOR][COLOR=#B26818]usb usb9[/COLOR]: SerialNumber: 0000:02:00.0
      [COLOR=#18B218][    1.712575] [/COLOR][COLOR=#B26818]hub 9-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.712581] [/COLOR][COLOR=#B26818]hub 9-0:1.0[/COLOR]: 2 ports detected
      [COLOR=#18B218][    1.712717] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: xHCI Host Controller
      [COLOR=#18B218][    1.712721] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: new USB bus registered, assign
      ed bus number 10
      [COLOR=#18B218][    1.712773] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: hcc params 0x040050af hci vers
      ion 0x100 quirks 0x0000000000080490
      [COLOR=#18B218][    1.712891] [/COLOR][COLOR=#B26818]usb usb10[/COLOR]: New USB device found, idVendor=1d6b, idPro
      duct=0002, bcdDevice= 5.00
      [COLOR=#18B218][    1.712892] [/COLOR][COLOR=#B26818]usb usb10[/COLOR]: New USB device strings: Mfr=3, Product=2, 
      SerialNumber=1
      [COLOR=#18B218][    1.712893] [/COLOR][COLOR=#B26818]usb usb10[/COLOR]: Product: xHCI Host Controller
      [COLOR=#18B218][    1.712894] [/COLOR][COLOR=#B26818]usb usb10[/COLOR]: Manufacturer: Linux 5.0.0-27-generic xhci-
      hcd
      [COLOR=#18B218][    1.712895] [/COLOR][COLOR=#B26818]usb usb10[/COLOR]: SerialNumber: 0000:04:00.0
      [COLOR=#18B218][    1.712972] [/COLOR][COLOR=#B26818]hub 10-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.712979] [/COLOR][COLOR=#B26818]hub 10-0:1.0[/COLOR]: 2 ports detected
      [COLOR=#18B218][    1.713066] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: xHCI Host Controller
      [COLOR=#18B218][    1.713069] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: new USB bus registered, assign
      ed bus number 11
      [COLOR=#18B218][    1.713071] [/COLOR][COLOR=#B26818]xhci_hcd 0000:04:00.0[/COLOR]: Host supports USB 3.0  SuperSp
      eed
      [COLOR=#18B218][    1.713085] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: We don't know the algorithms for LPM for t
      his host, disabling LPM.
      [COLOR=#18B218][    1.713105] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: New USB device found, idVendor=1d6b, idPro
      duct=0003, bcdDevice= 5.00
      [COLOR=#18B218][    1.713106] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: New USB device strings: Mfr=3, Product=2, 
      SerialNumber=1
      [COLOR=#18B218][    1.713107] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: Product: xHCI Host Controller
      [COLOR=#18B218][    1.713108] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: Manufacturer: Linux 5.0.0-27-generic xhci-
      hcd
      [COLOR=#18B218][    1.713109] [/COLOR][COLOR=#B26818]usb usb11[/COLOR]: SerialNumber: 0000:04:00.0
      [COLOR=#18B218][    1.713180] [/COLOR][COLOR=#B26818]hub 11-0:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    1.713186] [/COLOR][COLOR=#B26818]hub 11-0:1.0[/COLOR]: 2 ports detected
      [COLOR=#18B218][    1.713406] [/COLOR][COLOR=#B26818]i8042[/COLOR]: PNP: No PS/2 controller found.
      [COLOR=#18B218][    1.713465] [/COLOR][COLOR=#B26818]mousedev[/COLOR]: PS/2 mouse device common for all mice
      [COLOR=#18B218][    1.713580] [/COLOR][COLOR=#B26818]rtc_cmos 00:04[/COLOR]: RTC can wake from S4
      [COLOR=#18B218][    1.713685] [/COLOR][COLOR=#B26818]rtc_cmos 00:04[/COLOR]: registered as rtc0
      [COLOR=#18B218][    1.713699] [/COLOR][COLOR=#B26818]rtc_cmos 00:04[/COLOR]: alarms up to one month, y3k, 114 byte
      s nvram, hpet irqs
      [COLOR=#18B218][    1.713705] [/COLOR]i2c /dev entries driver
      [COLOR=#18B218][    1.713779] [/COLOR][COLOR=#B26818]device-mapper[/COLOR]: uevent: version 1.0.3
      [COLOR=#18B218][    1.713834] [/COLOR][COLOR=#B26818]device-mapper[/COLOR]: ioctl: 4.39.0-ioctl (2018-04-03) initi
      alised: dm-devel@redhat.com
      [COLOR=#18B218][    1.713850] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR]: Probing EISA bus 0
      [COLOR=#18B218][    1.713852] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: EISA: Cannot allocate resource for m[/B]
      ainboard
      [COLOR=#18B218][    1.713853] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 1
      [COLOR=#18B218][    1.713854] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 2
      [COLOR=#18B218][    1.713855] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 3
      [COLOR=#18B218][    1.713856] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 4
      [COLOR=#18B218][    1.713857] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 5
      [COLOR=#18B218][    1.713858] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 6
      [COLOR=#18B218][    1.713859] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 7
      [COLOR=#18B218][    1.713860] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR][B]: Cannot allocate resource for EISA sl[/B]
      ot 8
      [COLOR=#18B218][    1.713861] [/COLOR][COLOR=#B26818]platform eisa.0[/COLOR]: EISA: Detected 0 cards
      [COLOR=#18B218][    1.713929] [/COLOR][COLOR=#B26818]ledtrig-cpu[/COLOR]: registered to indicate activity on CPUs
      [COLOR=#18B218][    1.713931] [/COLOR]EFI Variables Facility v0.08 2004-May-17
      [COLOR=#18B218][    1.720561] [/COLOR][COLOR=#B26818]NET[/COLOR]: Registered protocol family 10
      [COLOR=#18B218][    1.725328] [/COLOR]Segment Routing with IPv6
      [COLOR=#18B218][    1.725344] [/COLOR][COLOR=#B26818]NET[/COLOR]: Registered protocol family 17
      [COLOR=#18B218][    1.725387] [/COLOR]Key type dns_resolver registered
      [COLOR=#18B218][    1.725789] [/COLOR][COLOR=#B26818]mce[/COLOR]: Using 7 MCE banks
      [COLOR=#18B218][    1.725799] [/COLOR][COLOR=#B26818]RAS[/COLOR]: Correctable Errors collector initialized.
      [COLOR=#18B218][    1.725802] [/COLOR][COLOR=#B26818]microcode[/COLOR]: microcode updated early to new patch_level
      =0x06000852
      [COLOR=#18B218][    1.725821] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU0: patch_level=0x06000852
      [COLOR=#18B218][    1.725827] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU1: patch_level=0x06000852
      [COLOR=#18B218][    1.725833] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU2: patch_level=0x06000852
      [COLOR=#18B218][    1.725839] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU3: patch_level=0x06000852
      [COLOR=#18B218][    1.725846] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU4: patch_level=0x06000852
      [COLOR=#18B218][    1.725852] [/COLOR][COLOR=#B26818]microcode[/COLOR]: CPU5: patch_level=0x06000852
      [COLOR=#18B218][    1.725879] [/COLOR][COLOR=#B26818]microcode[/COLOR]: Microcode Update Driver: v2.2.
      [COLOR=#18B218][    1.725887] [/COLOR][COLOR=#B26818]sched_clock[/COLOR]: Marking stable (1693665535, 32210019)->(
      1841944999, -116069445)
      [COLOR=#18B218][    1.726101] [/COLOR]registered taskstats version 1
      [COLOR=#18B218][    1.726110] [/COLOR]Loading compiled-in X.509 certificates
      [COLOR=#18B218][    1.727611] [/COLOR][COLOR=#B26818]Loaded X.509 cert 'Build time autogenerated kernel ke[/COLOR]
      y: 44048b015ce66fb3392e6cd278855a5859c60678'[COLOR=#B26818]                        [/COLOR] 
      [COLOR=#18B218][    1.727748] [/COLOR][COLOR=#B26818]Couldn't get size[/COLOR][COLOR=#B21818]: 0x800000000000000e[/COLOR]
      [COLOR=#18B218][    1.727749] [/COLOR][COLOR=#B26818]MODSIGN[/COLOR][COLOR=#B21818]: Couldn't get UEFI db list[/COLOR]
      [COLOR=#18B218][    1.727816] [/COLOR][COLOR=#B26818]Couldn't get size[/COLOR][COLOR=#B21818]: 0x800000000000000e[/COLOR]
      [COLOR=#18B218][    1.727816] [/COLOR][COLOR=#B26818]MODSIGN[/COLOR]: Couldn't get UEFI MokListRT
      [COLOR=#18B218][    1.727881] [/COLOR][COLOR=#B26818]Couldn't get size[/COLOR][COLOR=#B21818]: 0x800000000000000e[/COLOR]
      [COLOR=#18B218][    1.727882] [/COLOR][COLOR=#B26818]MODSIGN[/COLOR]: Couldn't get UEFI dbx list
      [COLOR=#18B218][    1.727897] [/COLOR][COLOR=#B26818]zswap[/COLOR]: loaded using pool lzo/zbud
      [COLOR=#18B218][    1.732260] [/COLOR]Key type big_key registered
      [COLOR=#18B218][    1.732264] [/COLOR]Key type trusted registered
      [COLOR=#18B218][    1.734329] [/COLOR]Key type encrypted registered
      [COLOR=#18B218][    1.734332] [/COLOR][COLOR=#B26818]AppArmor[/COLOR]: AppArmor sha1 policy hashing enabled
      [COLOR=#18B218][    1.734599] [/COLOR][COLOR=#B26818]ima[/COLOR]: No TPM chip found, activating TPM-bypass!
      [COLOR=#18B218][    1.734603] [/COLOR][COLOR=#B26818]ima[/COLOR]: Allocated hash algorithm: sha1
      [COLOR=#18B218][    1.734608] [/COLOR]No architecture policies found
      [COLOR=#18B218][    1.734616] [/COLOR][COLOR=#B26818]evm[/COLOR]: Initialising EVM extended attributes:
      [COLOR=#18B218][    1.734616] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.selinux
      [COLOR=#18B218][    1.734617] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.SMACK64
      [COLOR=#18B218][    1.734617] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.SMACK64EXEC
      [COLOR=#18B218][    1.734618] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.SMACK64TRANSMUTE
      [COLOR=#18B218][    1.734618] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.SMACK64MMAP
      [COLOR=#18B218][    1.734618] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.apparmor
      [COLOR=#18B218][    1.734619] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.ima
      [COLOR=#18B218][    1.734619] [/COLOR][COLOR=#B26818]evm[/COLOR]: security.capability
      [COLOR=#18B218][    1.734620] [/COLOR][COLOR=#B26818]evm[/COLOR]: HMAC attrs: 0x1
      [COLOR=#18B218][    1.734935] [/COLOR][COLOR=#B26818]  Magic number[/COLOR]: 3:642:522
      [COLOR=#18B218][    1.735012] [/COLOR][COLOR=#B26818]rtc_cmos 00:04[/COLOR]: setting system clock to 2019-09-04T08
      :31:15 UTC (1567585875)
      [COLOR=#18B218][    1.735186] [/COLOR][COLOR=#B26818]acpi_cpufreq[/COLOR]: overriding BIOS provided _PSD data
      [COLOR=#18B218][    1.737371] [/COLOR][COLOR=#B26818]Freeing unused decrypted memory[/COLOR]: 2040K
      [COLOR=#18B218][    1.738293] [/COLOR][COLOR=#B26818]Freeing unused kernel image memory[/COLOR]: 2584K
      [COLOR=#18B218][    1.771681] [/COLOR][COLOR=#B26818]Write protecting the kernel read-only data[/COLOR]: 22528k
      [COLOR=#18B218][    1.772387] [/COLOR][COLOR=#B26818]Freeing unused kernel image memory[/COLOR]: 2016K
      [COLOR=#18B218][    1.773001] [/COLOR][COLOR=#B26818]Freeing unused kernel image memory[/COLOR]: 1828K
      [COLOR=#18B218][    1.784215] [/COLOR][COLOR=#B26818]x86/mm[/COLOR]: Checked W+X mappings: passed, no W+X pages fo
      und.
      [COLOR=#18B218][    1.784221] [/COLOR]Run /init as init process
      [COLOR=#18B218][    1.849886] [/COLOR][COLOR=#B26818]IPMI message handler[/COLOR]: version 39.2
      [COLOR=#18B218][    1.851000] [/COLOR]ipmi device interface
      [COLOR=#18B218][    1.855229] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0[/COLOR][B]: can't disable ASPM; OS doesn't ha[/B]
      ve ASPM control
      [COLOR=#18B218][    1.856082] [/COLOR][COLOR=#B26818]ahci 0000:00:11.0[/COLOR]: version 3.0
      [COLOR=#18B218][    1.856189] [/COLOR][COLOR=#B26818]scsi host0[/COLOR]: pata_atiixp
      [COLOR=#18B218][    1.856381] [/COLOR][COLOR=#B26818]ahci 0000:00:11.0[/COLOR]: AHCI 0001.0200 32 slots 4 ports 6 
      Gbps 0xf impl SATA mode
      [COLOR=#18B218][    1.856384] [/COLOR][COLOR=#B26818]ahci 0000:00:11.0[/COLOR]: flags: 64bit ncq sntf ilck pm led 
      clo pmp pio slum part  
      [COLOR=#18B218][    1.857350] [/COLOR][COLOR=#B26818]libphy[/COLOR]: r8169: probed
      [COLOR=#18B218][    1.857784] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0 eth0[/COLOR]: RTL8168evl/8111evl, 74:d4:35
      :94:98:11, XID 2c9, IRQ 34
      [COLOR=#18B218][    1.857786] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0 eth0[/COLOR]: jumbo features [frames: 9200
      bytes, tx checksumming: ko]
      [COLOR=#18B218][    1.857807] [/COLOR][COLOR=#B26818]piix4_smbus 0000:00:14.0[/COLOR]: SMBus Host Controller at 0x
      b00, revision 0
      [COLOR=#18B218][    1.857813] [/COLOR][COLOR=#B26818]piix4_smbus 0000:00:14.0[/COLOR]: Using register 0x2c for SMB
      us port selection
      [COLOR=#18B218][    1.858885] [/COLOR][COLOR=#B26818]piix4_smbus 0000:00:14.0[/COLOR]: Auxiliary SMBus Host Contro
      ller at 0xb20
      [COLOR=#18B218][    1.858924] [/COLOR][COLOR=#B26818]scsi host1[/COLOR]: pata_atiixp
      [COLOR=#18B218][    1.858978] [/COLOR][COLOR=#B26818]ata1[/COLOR]: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf
      000 irq 14
      [COLOR=#18B218][    1.858979] [/COLOR][COLOR=#B26818]ata2[/COLOR]: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf
      008 irq 15
      [COLOR=#18B218][    1.863655] [/COLOR][COLOR=#B26818]firewire_ohci 0000:05:0e.0[/COLOR]: enabling device (0000 -> 
      0003)
      [COLOR=#18B218][    1.867592] [/COLOR][COLOR=#B26818]scsi host2[/COLOR]: ahci
      [COLOR=#18B218][    1.871136] [/COLOR][COLOR=#B26818]scsi host3[/COLOR]: ahci
      [COLOR=#18B218][    1.871755] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0 enp3s0[/COLOR]: renamed from eth0
      [COLOR=#18B218][    1.875636] [/COLOR][COLOR=#B26818]scsi host4[/COLOR]: ahci
      [COLOR=#18B218][    1.875810] [/COLOR][COLOR=#B26818]scsi host5[/COLOR]: ahci
      [COLOR=#18B218][    1.875874] [/COLOR][COLOR=#B26818]ata3[/COLOR]: SATA max UDMA/133 abar m1024@0xfe40b000 port 0x
      fe40b100 irq 19
      [COLOR=#18B218][    1.875876] [/COLOR][COLOR=#B26818]ata4[/COLOR]: SATA max UDMA/133 abar m1024@0xfe40b000 port 0x
      fe40b180 irq 19
      [COLOR=#18B218][    1.875878] [/COLOR][COLOR=#B26818]ata5[/COLOR]: SATA max UDMA/133 abar m1024@0xfe40b000 port 0x
      fe40b200 irq 19
      [COLOR=#18B218][    1.875879] [/COLOR][COLOR=#B26818]ata6[/COLOR]: SATA max UDMA/133 abar m1024@0xfe40b000 port 0x
      fe40b280 irq 19
      [COLOR=#18B218][    1.935705] [/COLOR][COLOR=#B26818]firewire_ohci 0000:05:0e.0[/COLOR]: added OHCI v1.10 device a
      s card 0, 4 IR + 8 IT contexts, quirks 0x11
      [COLOR=#18B218][    1.957260] [/COLOR][COLOR=#B21818]PKCS#7 signature not signed with a trusted key[/COLOR]
      [COLOR=#18B218][    1.957269] [/COLOR][COLOR=#B26818]nvidia[/COLOR][B]: loading out-of-tree module taints kernel.[/B]
      [COLOR=#18B218][    1.957275] [/COLOR][COLOR=#B26818]nvidia[/COLOR][B]: module license 'NVIDIA' taints kernel.[/B]
      [COLOR=#18B218][    1.957276] [/COLOR][B]Disabling lock debugging due to kernel taint[/B]
      [COLOR=#18B218][    1.987911] [/COLOR][COLOR=#B26818]nvidia[/COLOR]: module verification failed: signature and/or 
      required key missing - tainting kernel
      [COLOR=#18B218][    1.994000] [/COLOR][COLOR=#B26818]nvidia-nvlink[/COLOR]: Nvlink Core is being initialized, majo
      r device number 239
      [COLOR=#18B218][    1.994328] [/COLOR][COLOR=#B26818]nvidia 0000:01:00.0[/COLOR]: vgaarb: changed VGA decodes: old
      decodes=io+mem,decodes=none:owns=io+mem
      [COLOR=#18B218][    1.994411] [/COLOR][COLOR=#B26818]NVRM[/COLOR][B]: loading NVIDIA UNIX x86_64 Kernel Module  390.1[/B]
      16  Sun Jan 27 07:21:36 PST 2019 (using threaded interrupts)
      [COLOR=#18B218][    2.001055] [/COLOR][COLOR=#B21818]PKCS#7 signature not signed with a trusted key[/COLOR]
      [COLOR=#18B218][    2.002045] [/COLOR][COLOR=#B26818]nvidia-modeset[/COLOR]: Loading NVIDIA Kernel Mode Setting Dr
      iver for UNIX platforms  390.116  Sun Jan 27 06:30:32 PST 2019
      [COLOR=#18B218][    2.002484] [/COLOR][COLOR=#B21818]PKCS#7 signature not signed with a trusted key[/COLOR]
      [COLOR=#18B218][    2.003046] [/COLOR][drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
      [COLOR=#18B218][    2.003048] [/COLOR][drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:
      01:00.0 on minor 0
      [COLOR=#18B218][    2.030825] [/COLOR][COLOR=#B26818]ata1.00[/COLOR]: ATAPI: PIONEER BD-ROM  BDC-207D, 1.00, max U
      DMA/100
      [COLOR=#18B218][    2.030832] [/COLOR][COLOR=#B26818]ata1.00[/COLOR][B]: limited to UDMA/33 due to 40-wire cable[/B]
      [COLOR=#18B218][    2.047674] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: new high-speed USB device number 2 using xhc
      i_hcd
      [COLOR=#18B218][    2.055670] [/COLOR][COLOR=#B26818]usb 4-3[/COLOR]: new full-speed USB device number 2 using ohc
      i-pci
      [COLOR=#18B218][    2.063004] [/COLOR][COLOR=#B26818]scsi 0:0:0:0[/COLOR]: CD-ROM            PIONEER  BD-ROM  BDC-
      207D 1.00 PQ: 0 ANSI: 5
      [COLOR=#18B218][    2.075720] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: new SuperSpeed Gen 1 USB device number 2 us
      ing xhci_hcd
      [COLOR=#18B218][    2.096231] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: New USB device found, idVendor=0bc2, idProd
      uct=2322, bcdDevice= 1.00
      [COLOR=#18B218][    2.096233] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: New USB device strings: Mfr=2, Product=3, S
      erialNumber=1
      [COLOR=#18B218][    2.096234] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: Product: Expansion
      [COLOR=#18B218][    2.096235] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: Manufacturer: Seagate
      [COLOR=#18B218][    2.096235] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR]: SerialNumber: NA88NPHK
      [COLOR=#18B218][    2.099314] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR][B]: USB controller 0000:04:00.0 does not suppor[/B]
      t streams, which are required by the UAS driver.
      [COLOR=#18B218][    2.099315] [/COLOR][COLOR=#B26818]usb 11-2[/COLOR][B]: Please try an other USB controller if you w[/B]
      ish to use UAS.
      [COLOR=#18B218][    2.099316] [/COLOR][COLOR=#B26818]usb-storage 11-2:1.0[/COLOR]: USB Mass Storage device detecte
      d
      [COLOR=#18B218][    2.099438] [/COLOR][COLOR=#B26818]scsi host6[/COLOR]: usb-storage 11-2:1.0
      [COLOR=#18B218][    2.099498] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new interface driver usb-storage
      [COLOR=#18B218][    2.100563] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new interface driver uas
      [COLOR=#18B218][    2.141616] [/COLOR][COLOR=#B26818]sr 0:0:0:0[/COLOR]: [sr0] scsi3-mmc drive: 125x/125x writer c
      d/rw xa/form2 cdda tray
      [COLOR=#18B218][    2.141620] [/COLOR][COLOR=#B26818]cdrom[/COLOR]: Uniform CD-ROM driver Revision: 3.20
      [COLOR=#18B218][    2.142044] [/COLOR][COLOR=#B26818]sr 0:0:0:0[/COLOR]: Attached scsi CD-ROM sr0
      [COLOR=#18B218][    2.142097] [/COLOR][COLOR=#B26818]sr 0:0:0:0[/COLOR]: Attached scsi generic sg0 type 5
      [COLOR=#18B218][    2.190966] [/COLOR][COLOR=#B26818]ata6[/COLOR]: SATA link down (SStatus 0 SControl 300)
      [COLOR=#18B218][    2.191017] [/COLOR][COLOR=#B26818]ata4[/COLOR]: SATA link down (SStatus 0 SControl 300)
      [COLOR=#18B218][    2.240232] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: New USB device found, idVendor=0bc2, idProdu
      ct=ab44, bcdDevice=48.85
      [COLOR=#18B218][    2.240233] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: New USB device strings: Mfr=1, Product=2, Se
      rialNumber=3
      [COLOR=#18B218][    2.240234] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: Product: Backup+ Hub
      [COLOR=#18B218][    2.240235] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: Manufacturer: Seagate
      [COLOR=#18B218][    2.240236] [/COLOR][COLOR=#B26818]usb 8-2[/COLOR]: SerialNumber: 01CB7233B04Y
      [COLOR=#18B218][    2.245012] [/COLOR][COLOR=#B26818]hub 8-2:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    2.250674] [/COLOR][COLOR=#B26818]hub 8-2:1.0[/COLOR]: 3 ports detected
      [COLOR=#18B218][    2.256986] [/COLOR][COLOR=#B26818]usb 4-3[/COLOR]: New USB device found, idVendor=046d, idProdu
      ct=c52b, bcdDevice=24.07
      [COLOR=#18B218][    2.256988] [/COLOR][COLOR=#B26818]usb 4-3[/COLOR]: New USB device strings: Mfr=1, Product=2, Se
      rialNumber=0
      [COLOR=#18B218][    2.256989] [/COLOR][COLOR=#B26818]usb 4-3[/COLOR]: Product: USB Receiver
      [COLOR=#18B218][    2.256990] [/COLOR][COLOR=#B26818]usb 4-3[/COLOR]: Manufacturer: Logitech
      [COLOR=#18B218][    2.264235] [/COLOR][COLOR=#B26818]hidraw[/COLOR]: raw HID events driver (C) Jiri Kosina
      [COLOR=#18B218][    2.280950] [/COLOR][COLOR=#B26818]usbcore[/COLOR]: registered new interface driver usbhid
      [COLOR=#18B218][    2.280952] [/COLOR][COLOR=#B26818]usbhid[/COLOR]: USB HID core driver
      [COLOR=#18B218][    2.283801] [/COLOR][COLOR=#B26818]logitech-djreceiver 0003:046D:C52B.0003[/COLOR]: hiddev0,hidr
      aw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.
      0-3/input2
      [COLOR=#18B218][    2.335759] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: new SuperSpeed Gen 1 USB device number 2 usi
      ng xhci_hcd
      [COLOR=#18B218][    2.351675] [/COLOR][COLOR=#B26818]tsc[/COLOR]: Refined TSC clocksource calibration: 3917.909 MH
      z
      [COLOR=#18B218][    2.351689] [/COLOR][COLOR=#B26818]clocksource[/COLOR]: tsc: mask: 0xffffffffffffffff max_cycles
      : 0x70f2e0f5e82, max_idle_ns: 881590595976 ns
      [COLOR=#18B218][    2.351694] [/COLOR][COLOR=#B26818]ata3[/COLOR]: SATA link up 6.0 Gbps (SStatus 133 SControl 300
      )
      [COLOR=#18B218][    2.351739] [/COLOR][COLOR=#B26818]clocksource[/COLOR]: Switched to clocksource tsc
      [COLOR=#18B218][    2.351752] [/COLOR][COLOR=#B26818]ata5[/COLOR]: SATA link up 6.0 Gbps (SStatus 133 SControl 300
      )
      [COLOR=#18B218][    2.352333] [/COLOR][COLOR=#B26818]ata5.00[/COLOR]: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/13
      3
      [COLOR=#18B218][    2.352334] [/COLOR][COLOR=#B26818]ata5.00[/COLOR]: 1953525168 sectors, multi 16: LBA48 NCQ (dep
      th 32), AA
      [COLOR=#18B218][    2.352880] [/COLOR][COLOR=#B26818]ata5.00[/COLOR]: configured for UDMA/133
      [COLOR=#18B218][    2.356204] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: New USB device found, idVendor=4971, idProdu
      ct=1015, bcdDevice= 0.00
      [COLOR=#18B218][    2.356206] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: New USB device strings: Mfr=10, Product=11, 
      SerialNumber=3
      [COLOR=#18B218][    2.356207] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: Product: Touro Desk 3.0
      [COLOR=#18B218][    2.356208] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: Manufacturer: HGST
      [COLOR=#18B218][    2.356208] [/COLOR][COLOR=#B26818]usb 9-1[/COLOR]: SerialNumber: 31001301190B00001647
      [COLOR=#18B218][    2.356544] [/COLOR][COLOR=#B26818]usb-storage 9-1:1.0[/COLOR]: USB Mass Storage device detected
      [COLOR=#18B218][    2.356640] [/COLOR][COLOR=#B26818]scsi host7[/COLOR]: usb-storage 9-1:1.0
      [COLOR=#18B218][    2.368379] [/COLOR][COLOR=#B26818]ata3.00[/COLOR]: ATA-8: KINGSTON SV300S37A120G, 521ABBF0, max
      UDMA/133
      [COLOR=#18B218][    2.368384] [/COLOR][COLOR=#B26818]ata3.00[/COLOR]: 234441648 sectors, multi 16: LBA48 NCQ (dept
      h 32), AA
      [COLOR=#18B218][    2.387974] [/COLOR][COLOR=#B26818]ata3.00[/COLOR]: configured for UDMA/133
      [COLOR=#18B218][    2.388145] [/COLOR][COLOR=#B26818]scsi 2:0:0:0[/COLOR]: Direct-Access     ATA      KINGSTON SV3
      00S3 BBF0 PQ: 0 ANSI: 5
      [COLOR=#18B218][    2.388335] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: Attached scsi generic sg1 type 0
      [COLOR=#18B218][    2.388410] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: [sda] 234441648 512-byte logical blocks: 
      (120 GB/112 GiB)
      [COLOR=#18B218][    2.388431] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: [sda] Write Protect is off
      [COLOR=#18B218][    2.388432] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: [sda] Mode Sense: 00 3a 00 00
      [COLOR=#18B218][    2.388484] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: [sda] Write cache: enabled, read cache: e
      nabled, doesn't support DPO or FUA
      [COLOR=#18B218][    2.388542] [/COLOR][COLOR=#B26818]scsi 4:0:0:0[/COLOR]: Direct-Access     ATA      ST1000DM003-
      1CH1 CC47 PQ: 0 ANSI: 5
      [COLOR=#18B218][    2.388777] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: Attached scsi generic sg2 type 0
      [COLOR=#18B218][    2.388794] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] 1953525168 512-byte logical blocks:
      (1.00 TB/932 GiB)
      [COLOR=#18B218][    2.388796] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] 4096-byte physical blocks
      [COLOR=#18B218][    2.388807] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] Write Protect is off
      [COLOR=#18B218][    2.388808] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] Mode Sense: 00 3a 00 00
      [COLOR=#18B218][    2.388837] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] Write cache: enabled, read cache: e
      nabled, doesn't support DPO or FUA
      [COLOR=#18B218][    2.389869] [/COLOR][COLOR=#B26818] sda[/COLOR]: sda1 sda2 sda3 sda5
      [COLOR=#18B218][    2.390288] [/COLOR][COLOR=#B26818]sd 2:0:0:0[/COLOR]: [sda] Attached SCSI disk
      [COLOR=#18B218][    2.397472] [/COLOR][COLOR=#B26818] sdb[/COLOR]: sdb1 sdb2
      [COLOR=#18B218][    2.397900] [/COLOR][COLOR=#B26818]sd 4:0:0:0[/COLOR]: [sdb] Attached SCSI disk
      [COLOR=#18B218][    2.407186] [/COLOR][COLOR=#B26818]input[/COLOR]: Logitech Unifying Device.
      
      Wireless PID:404d Ke
      yboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:046
      D:C52B.0003/0003:046D:404D.0004/input/input2
      [COLOR=#18B218][    2.407243] [/COLOR][COLOR=#B26818]input[/COLOR]: Logitech Unifying Device. Wireless PID:404d Mo
      use as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/0003:046D:C
      52B.0003/0003:046D:404D.0004/input/input3
      [COLOR=#18B218][    2.407330] [/COLOR][COLOR=#B26818]input[/COLOR]: Logitech Unifying Device. Wireless PID:404d Co
      nsumer Control as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/
      0003:046D:C52B.0003/0003:046D:404D.0004/input/input4
      [COLOR=#18B218][    2.407376] [/COLOR][COLOR=#B26818]input[/COLOR]: Logitech Unifying Device. Wireless PID:404d Sy
      stem Control as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.2/00
      03:046D:C52B.0003/0003:046D:404D.0004/input/input5
      [COLOR=#18B218][    2.407428] [/COLOR][COLOR=#B26818]hid-generic 0003:046D:404D.0004[/COLOR]: input,hidraw1: USB H
      ID v1.11 Keyboard [Logitech Unifying Device. 
      
      Wireless PID:404d] on u
      sb-0000:00:12.0-3:1
      [COLOR=#18B218][    2.447744] [/COLOR][COLOR=#B26818]firewire_core 0000:05:0e.0[/COLOR]: created device fw0: GUID 
      0049e5500e520d00, S400
      [COLOR=#18B218][    2.483801] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: new SuperSpeed Gen 1 USB device number 3 usi
      ng xhci_hcd
      [COLOR=#18B218][    2.506567] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: New USB device found, idVendor=0bc2, idProdu
      ct=ab45, bcdDevice=48.85
      [COLOR=#18B218][    2.506569] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: New USB device strings: Mfr=1, Product=2, Se
      rialNumber=3
      [COLOR=#18B218][    2.506570] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: Product: Backup+ Hub
      [COLOR=#18B218][    2.506571] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: Manufacturer: Seagate
      [COLOR=#18B218][    2.506572] [/COLOR][COLOR=#B26818]usb 9-2[/COLOR]: SerialNumber: 01CB7233B04Y
      [COLOR=#18B218][    2.507101] [/COLOR][COLOR=#B26818]hub 9-2:1.0[/COLOR]: USB hub found
      [COLOR=#18B218][    2.507361] [/COLOR][COLOR=#B26818]hub 9-2:1.0[/COLOR]: 3 ports detected
      [COLOR=#18B218][    2.589386] [/COLOR][COLOR=#B26818]random[/COLOR]: fast init done
      [COLOR=#18B218][    2.595887] [/COLOR][COLOR=#B26818]random[/COLOR]: systemd-udevd: uninitialized urandom read (16
      bytes read)
      [COLOR=#18B218][    2.595918] [/COLOR][COLOR=#B26818]random[/COLOR]: systemd-udevd: uninitialized urandom read (16
      bytes read)
      [COLOR=#18B218][    2.595920] [/COLOR][COLOR=#B26818]random[/COLOR]: systemd-udevd: uninitialized urandom read (16
      bytes read)
      [COLOR=#18B218][    2.639075] [/COLOR][COLOR=#B26818]input[/COLOR]: Logitech K400 Plus as /devices/pci0000:00/0000
      :00:12.0/usb4/4-3/4-3:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/in
      put/input9
      [COLOR=#18B218][    2.639161] [/COLOR][COLOR=#B26818]logitech-hidpp-device 0003:046D:404D.0004[/COLOR]: input,hidr
      aw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:12.0
      -3:1
      [COLOR=#18B218][    2.707673] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: new high-speed USB device number 3 using ehc
      i-pci
      [COLOR=#18B218][    2.795769] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: new SuperSpeed Gen 1 USB device number 4 u
      sing xhci_hcd
      [COLOR=#18B218][    2.816344] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: New USB device found, idVendor=0bc2, idPro
      duct=ab38, bcdDevice= 1.00
      [COLOR=#18B218][    2.816345] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: New USB device strings: Mfr=2, Product=3, 
      SerialNumber=1
      [COLOR=#18B218][    2.816347] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: Product: Backup+ Hub BK
      [COLOR=#18B218][    2.816347] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: Manufacturer: Seagate
      [COLOR=#18B218][    2.816348] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR]: SerialNumber: NA8T65B3
      [COLOR=#18B218][    2.816676] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR][B]: USB controller 0000:02:00.0 does not suppo[/B]
      rt streams, which are required by the UAS driver.
      [COLOR=#18B218][    2.816677] [/COLOR][COLOR=#B26818]usb 9-2.1[/COLOR][B]: Please try an other USB controller if you [/B]
      wish to use UAS.
      [COLOR=#18B218][    2.816678] [/COLOR][COLOR=#B26818]usb-storage 9-2.1:1.0[/COLOR]: USB Mass Storage device detect
      ed
      [COLOR=#18B218][    2.816901] [/COLOR][COLOR=#B26818]scsi host8[/COLOR]: usb-storage 9-2.1:1.0
      [COLOR=#18B218][    2.866173] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: New USB device found, idVendor=058f, idProdu
      ct=6364, bcdDevice= 1.00
      [COLOR=#18B218][    2.866174] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: New USB device strings: Mfr=1, Product=2, Se
      rialNumber=3
      [COLOR=#18B218][    2.866175] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: Product: Mass Storage Device
      [COLOR=#18B218][    2.866176] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: Manufacturer: Generic
      [COLOR=#18B218][    2.866177] [/COLOR][COLOR=#B26818]usb 1-4[/COLOR]: SerialNumber: 058F63646476
      [COLOR=#18B218][    2.866445] [/COLOR][COLOR=#B26818]usb-storage 1-4:1.0[/COLOR]: USB Mass Storage device detected
      [COLOR=#18B218][    2.866609] [/COLOR][COLOR=#B26818]scsi host9[/COLOR]: usb-storage 1-4:1.0
      [COLOR=#18B218][    2.867759] [/COLOR][COLOR=#B26818]hid-generic 0003:058F:6364.0005[/COLOR]: hiddev1,hidraw2: USB
      HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:12.2-
      4/input1
      [COLOR=#18B218][    3.119935] [/COLOR][COLOR=#B26818]scsi 6:0:0:0[/COLOR]: Direct-Access     Seagate  Expansion   
          9300 PQ: 0 ANSI: 6
      [COLOR=#18B218][    3.120149] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: Attached scsi generic sg3 type 0
      [COLOR=#18B218][    3.120302] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: [sdc] 3907029167 512-byte logical blocks:
      (2.00 TB/1.82 TiB)
      [COLOR=#18B218][    3.120515] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: [sdc] Write Protect is off
      [COLOR=#18B218][    3.120517] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: [sdc] Mode Sense: 4f 00 00 00
      [COLOR=#18B218][    3.120714] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: [sdc] Write cache: enabled, read cache: e
      nabled, doesn't support DPO or FUA
      [COLOR=#18B218][    3.121841] [/COLOR][COLOR=#B26818] sdc[/COLOR]: sdc1
      [COLOR=#18B218][    3.122795] [/COLOR][COLOR=#B26818]sd 6:0:0:0[/COLOR]: [sdc] Attached SCSI disk
      [COLOR=#18B218][    3.151684] [/COLOR][COLOR=#B26818]EXT4-fs (sda1)[/COLOR]: mounted filesystem with ordered data 
      mode.
      
      Opts: (null)
      [COLOR=#18B218][    3.375955] [/COLOR][COLOR=#B26818]scsi 7:0:0:0[/COLOR]: Direct-Access     HGST                 
          0000 PQ: 0 ANSI: 6
      [COLOR=#18B218][    3.376135] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR]: Attached scsi generic sg4 type 0
      [COLOR=#18B218][    3.376281] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR]: [sdd] 976754431 4096-byte logical blocks:
      (4.00 TB/3.64 TiB)
      [COLOR=#18B218][    3.376478] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR]: [sdd] Write Protect is off
      [COLOR=#18B218][    3.376480] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR]: [sdd] Mode Sense: 27 00 00 00
      [COLOR=#18B218][    3.376681] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR][COLOR=#B21818]: [sdd] No Caching mode page found[/COLOR]
      [COLOR=#18B218][    3.376684] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR][COLOR=#B21818]: [sdd] Assuming drive cache: write through[/COLOR]
      [COLOR=#18B218][    3.377491] [/COLOR][COLOR=#B26818] sdd[/COLOR]: sdd1[COLOR=#B21818]                                           [/COLOR] 
      [COLOR=#18B218][    3.378397] [/COLOR][COLOR=#B26818]sd 7:0:0:0[/COLOR]: [sdd] Attached SCSI disk
      [COLOR=#18B218][    3.559842] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: systemd 237 running in system mode.
      
      (+PAM
      +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETU
      P +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN
      2 +IDN -PCRE2 default-hierarchy=hybrid)
      [COLOR=#18B218][    3.580038] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Detected architecture x86-64.
      [COLOR=#18B218][    3.583130] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Set hostname to <ross-To-be-filled-by-O-E
      -M>.
      [COLOR=#18B218][    3.678317] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Reached target User and Group Name Lookup
      s.
      [COLOR=#18B218][    3.678495] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Created slice System Slice.
      [COLOR=#18B218][    3.678604] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Created slice system-systemd\x2dfsck.slic
      e.
      [COLOR=#18B218][    3.678667] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Listening on Journal Socket.
      [COLOR=#18B218][    3.679213] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Starting Uncomplicated firewall...
      [COLOR=#18B218][    3.679817] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Started Read required files in advance.
      [COLOR=#18B218][    3.680750] [/COLOR][COLOR=#B26818]systemd[1][/COLOR]: Mounting Huge Pages File System...
      [COLOR=#18B218][    3.695647] [/COLOR][COLOR=#B26818]EXT4-fs (sda1)[/COLOR]: re-mounted.
      
      Opts: errors=remount-ro
      [COLOR=#18B218][    3.699346] [/COLOR][COLOR=#B26818]lp[/COLOR]: driver loaded but no devices found
      [COLOR=#18B218][    3.702235] [/COLOR][COLOR=#B26818]ppdev[/COLOR]: user-space parallel port driver
      [COLOR=#18B218][    3.790046] [/COLOR][COLOR=#B26818]systemd-journald[425][/COLOR]: Received request to flush runt
      ime journal from PID 1
      [COLOR=#18B218][    3.823864] [/COLOR][COLOR=#B26818]scsi 8:0:0:0[/COLOR]: Direct-Access     Seagate  Backup+ Hub 
      BK   D781 PQ: 0 ANSI: 6
      [COLOR=#18B218][    3.824061] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: Attached scsi generic sg5 type 0
      [COLOR=#18B218][    3.824192] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] Very big device. 
      
      Trying to use READ
      CAPACITY(16).
      [COLOR=#18B218][    3.824315] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] 15628053167 512-byte logical blocks
      : (8.00 TB/7.28 TiB)
      [COLOR=#18B218][    3.824316] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] 4096-byte physical blocks
      [COLOR=#18B218][    3.824519] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] Write Protect is off
      [COLOR=#18B218][    3.824520] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] Mode Sense: 4f 00 00 00
      [COLOR=#18B218][    3.824715] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] Write cache: disabled, read cache: 
      enabled, doesn't support DPO or FUA
      [COLOR=#18B218][    3.832383] [/COLOR][COLOR=#B26818] sde[/COLOR]: sde1 sde2
      [COLOR=#18B218][    3.833294] [/COLOR][COLOR=#B26818]sd 8:0:0:0[/COLOR]: [sde] Attached SCSI disk
      [COLOR=#18B218][    3.888313] [/COLOR][COLOR=#B26818]scsi 9:0:0:0[/COLOR]: Direct-Access     Generic- SD/MMC      
          1.00 PQ: 0 ANSI: 0
      [COLOR=#18B218][    3.888924] [/COLOR][COLOR=#B26818]scsi 9:0:0:1[/COLOR]: Direct-Access     Generic- Compact Flas
      h    1.01 PQ: 0 ANSI: 0
      [COLOR=#18B218][    3.889551] [/COLOR][COLOR=#B26818]scsi 9:0:0:2[/COLOR]: Direct-Access     Generic- SM/xD-Pictur
      e    1.02 PQ: 0 ANSI: 0
      [COLOR=#18B218][    3.890193] [/COLOR][COLOR=#B26818]scsi 9:0:0:3[/COLOR]: Direct-Access     Generic- MS/MS-Pro   
          1.03 PQ: 0 ANSI: 0 CCS
      [COLOR=#18B218][    3.890665] [/COLOR][COLOR=#B26818]sd 9:0:0:0[/COLOR]: Attached scsi generic sg6 type 0
      [COLOR=#18B218][    3.891020] [/COLOR][COLOR=#B26818]sd 9:0:0:1[/COLOR]: Attached scsi generic sg7 type 0
      [COLOR=#18B218][    3.891396] [/COLOR][COLOR=#B26818]sd 9:0:0:2[/COLOR]: Attached scsi generic sg8 type 0
      [COLOR=#18B218][    3.891910] [/COLOR][COLOR=#B26818]sd 9:0:0:3[/COLOR]: Attached scsi generic sg9 type 0
      [COLOR=#18B218][    3.894671] [/COLOR][COLOR=#B26818]sd 9:0:0:3[/COLOR]: [sdi] Attached SCSI removable disk
      [COLOR=#18B218][    3.896045] [/COLOR][COLOR=#B26818]sd 9:0:0:0[/COLOR]: [sdf] Attached SCSI removable disk
      [COLOR=#18B218][    3.896668] [/COLOR][COLOR=#B26818]sd 9:0:0:1[/COLOR]: [sdg] Attached SCSI removable disk
      [COLOR=#18B218][    3.897929] [/COLOR][COLOR=#B26818]sd 9:0:0:2[/COLOR]: [sdh] Attached SCSI removable disk
      [COLOR=#18B218][    3.964399] [/COLOR][COLOR=#B21818]PKCS#7 signature not signed with a trusted key[/COLOR]
      [COLOR=#18B218][    3.967338] [/COLOR][COLOR=#B26818]nvidia-uvm[/COLOR]: Loaded the UVM driver in 8 mode, major de
      vice number 237
      [COLOR=#18B218][    4.162223] [/COLOR][COLOR=#B26818]cryptd[/COLOR]: max_cpu_qlen set to 1000
      [COLOR=#18B218][    4.170026] [/COLOR]AVX version of gcm_enc/dec engaged.
      [COLOR=#18B218][    4.170027] [/COLOR]AES CTR mode by8 optimization enabled
      [COLOR=#18B218][    4.241536] [/COLOR][COLOR=#B26818]snd_hda_intel 0000:01:00.1[/COLOR]: enabling device (0000 -> 
      0002)
      [COLOR=#18B218][    4.241583] [/COLOR][COLOR=#B26818]snd_hda_intel 0000:01:00.1[/COLOR]: Disabling MSI
      [COLOR=#18B218][    4.241614] [/COLOR][COLOR=#B26818]snd_hda_intel 0000:01:00.1[/COLOR]: Handle vga_switcheroo aud
      io client
      [COLOR=#18B218][    4.264106] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]: autoconfig for ALC
      889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
      [COLOR=#18B218][    4.264109] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:    speaker_outs=0 
      (0x0/0x0/0x0/0x0/0x0)
      [COLOR=#18B218][    4.264111] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:    hp_outs=1 (0x1b
      /0x0/0x0/0x0/0x0)
      [COLOR=#18B218][    4.264113] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:    mono: mono_out=
      0x0
      [COLOR=#18B218][    4.264114] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:    dig-out=0x11/0x
      1e
      [COLOR=#18B218][    4.264115] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:    inputs:
      [COLOR=#18B218][    4.264118] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:      Front Mic=0x1
      9
      [COLOR=#18B218][    4.264119] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:      Rear Mic=0x18
      [COLOR=#18B218][    4.264120] [/COLOR][COLOR=#B26818]snd_hda_codec_realtek hdaudioC0D0[/COLOR]:      Line=0x1a
      [COLOR=#18B218][    4.283914] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Front Mic as /devices/pci0000:00/00
      00:00:14.2/sound/card0/input10
      [COLOR=#18B218][    4.283974] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Rear Mic as /devices/pci0000:00/000
      0:00:14.2/sound/card0/input11
      [COLOR=#18B218][    4.284025] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Line as /devices/pci0000:00/0000:00
      :14.2/sound/card0/input12
      [COLOR=#18B218][    4.284087] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Line Out Front as /devices/pci0000:
      00/0000:00:14.2/sound/card0/input13
      [COLOR=#18B218][    4.284155] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Line Out Surround as /devices/pci00
      00:00/0000:00:14.2/sound/card0/input14
      [COLOR=#18B218][    4.284219] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Line Out CLFE as /devices/pci0000:0
      0/0000:00:14.2/sound/card0/input15
      [COLOR=#18B218][    4.284276] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Line Out Side as /devices/pci0000:0
      0/0000:00:14.2/sound/card0/input16
      [COLOR=#18B218][    4.284352] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA ATI SB Front Headphone as /devices/pci0000
      :00/0000:00:14.2/sound/card0/input17
      [COLOR=#18B218][    4.387442] [/COLOR][COLOR=#B26818]kvm[/COLOR]: Nested Virtualization enabled
      [COLOR=#18B218][    4.387446] [/COLOR][COLOR=#B26818]kvm[/COLOR]: Nested Paging enabled
      [COLOR=#18B218][    4.390494] [/COLOR][COLOR=#B26818]MCE[/COLOR]: In-kernel MCE decoding enabled.
      [COLOR=#18B218][    4.392464] [/COLOR][COLOR=#B26818]EDAC amd64[/COLOR]: Node 0: DRAM ECC disabled.
      [COLOR=#18B218][    4.392470] [/COLOR][COLOR=#B26818]EDAC amd64[/COLOR]: ECC disabled in the BIOS or no ECC capabi
      lity, module will not load.
                     Either enable ECC checking or force module loading b
      y setting 'ecc_enable_override'.
                     (Note that use of the override may cause unknown sid
      e effects.)
      [COLOR=#18B218][    4.548813] [/COLOR][COLOR=#B26818]resource sanity check[/COLOR][B]: requesting [mem 0x000c0000-0x0[/B]
      00fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x00
      0dffff window]
      [COLOR=#18B218][    4.549266] [/COLOR][B]caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia[/B]
      ] mapping multiple BARs
      [COLOR=#18B218][    4.569087] [/COLOR][COLOR=#B26818]random[/COLOR]: crng init done
      [COLOR=#18B218][    4.569089] [/COLOR][COLOR=#B26818]random[/COLOR]: 7 urandom warning(s) missed due to ratelimiti
      ng
      [COLOR=#18B218][    4.842602] [/COLOR]Adding 9765884k swap on /dev/sda2.
      
      Priority:-2 exten
      ts:1 across:9765884k SSFS
      [COLOR=#18B218][    5.071694] [/COLOR][COLOR=#B26818]EXT4-fs (sda3)[/COLOR]: mounted filesystem with ordered data 
      mode. 
      
      Opts: (null)
      [COLOR=#18B218][    5.080516] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:0
      0/0000:00:02.0/0000:01:00.1/sound/card1/input18
      [COLOR=#18B218][    5.080655] [/COLOR][COLOR=#B26818]input[/COLOR]: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:0
      0/0000:00:02.0/0000:01:00.1/sound/card1/input19
      [COLOR=#18B218][    5.458136] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:2): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="libreoffi
      ce-senddoc" pid=963 comm="apparmor_parser"
      [COLOR=#18B218][    5.458438] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:3): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="libreoffi
      ce-xpdfimport" pid=965 comm="apparmor_parser"
      [COLOR=#18B218][    5.458514] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:4): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="libreoffi
      ce-oopslash" pid=962 comm="apparmor_parser"
      [COLOR=#18B218][    5.459267] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:5): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="/usr/bin/
      man" pid=961 comm="apparmor_parser"
      [COLOR=#18B218][    5.459270] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:6): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="man_filte
      r" pid=961 comm="apparmor_parser"
      [COLOR=#18B218][    5.459272] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.216:7): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="man_groff
      " pid=961 comm="apparmor_parser"
      [COLOR=#18B218][    5.460606] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.220:8): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="/usr/lib/
      snapd/snap-confine" pid=966 comm="apparmor_parser"
      [COLOR=#18B218][    5.460610] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.220:9): apparmor="S
      TATUS" operation="profile_load" profile="unconfined" name="/usr/lib/
      snapd/snap-confine//mount-namespace-capture-helper" pid=966 comm="ap
      parmor_parser"
      [COLOR=#18B218][    5.460791] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.220:10): apparmor="
      STATUS" operation="profile_load" profile="unconfined" name="/sbin/dh
      client" pid=959 comm="apparmor_parser"
      [COLOR=#18B218][    5.460795] [/COLOR][COLOR=#B26818]audit[/COLOR]: type=1400 audit(1567585879.220:11): apparmor="
      STATUS" operation="profile_load" profile="unconfined" name="/usr/lib
      /NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser
      "
      [COLOR=#18B218][    5.812681] [/COLOR][COLOR=#B26818]RTL8211E Gigabit Ethernet r8169-300:00[/COLOR]: attached PHY 
      driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, i
      rq=IGNORE)
      [COLOR=#18B218][    6.009827] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0 enp3s0[/COLOR]: Link is Down
      [COLOR=#18B218][    6.621181] [/COLOR][COLOR=#B26818]resource sanity check[/COLOR][B]: requesting [mem 0x000c0000-0x0[/B]
      00fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x00
      0dffff window]
      [COLOR=#18B218][    6.621462] [/COLOR][B]caller os_map_kernel_space.part.8+0x10b/0x150 [nvidia[/B]
      ] mapping multiple BARs
      [COLOR=#18B218][    9.029286] [/COLOR][COLOR=#B26818]r8169 0000:03:00.0 enp3s0[/COLOR]: Link is Up - 1Gbps/Full - 
      flow control rx/tx
      [COLOR=#18B218][    9.029296] [/COLOR][COLOR=#B26818]IPv6[/COLOR]: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes r
      eady
      [COLOR=#18B218][   10.804530] [/COLOR][COLOR=#B26818]bpfilter[/COLOR]: Loaded bpfilter_umh pid 1687
      [COLOR=#18B218][   28.142809] [/COLOR][COLOR=#B26818]logitech-hidpp-device 0003:046D:404D.0004[/COLOR]: HID++ 4.1 
      device connected.
      [COLOR=#54FF54][B]ross@ross-To-be-filled-by-O-E-M[/B][/COLOR]:[COLOR=#5454FF][B]~[/B][/COLOR]$
      
      
      
      [/FONT]


      Any ideas? The drive label is "media" and is an 8TB HDD. Thanks! I am also having trouble mounting the internal 1TB HDD as well which I think is formatted to ext4.

      Comment


        #4
        If it helps solve the issue, I have found a workout, but it is still not ideal.

        If I click on the device notifier in the system tray, locate the device, then click "open with file manager" it brings an error and says "malformed URL". If I close than window, and try again, the device then works.

        Any thoughts?

        Thanks

        Comment


          #5
          As to your internal 1TB HDD, something appears to have mounted at
          [ 5.071694] EXT4-fs (sda3): mounted filesystem with ordered data
          mode.
          The device notifier is trying to say that the system has discovered a new device, and the "open with file manager" indicates that it seems to be a block device i.e., a storage device such as an HDD or USB. At that point and at the point that the device works, try the dmesg entry again. The dmesg data from before will show again, but may at the end of the list provide some insight into how your system sees the new device.
          The next brick house on the left
          Intel i7 11th Gen | 16GB | 1TB | KDE Plasma 5.27.11​| Kubuntu 24.04 | 6.8.0-31-generic



          Comment


            #6
            Originally posted by CanyonRoss View Post
            If I click on the device notifier in the system tray, locate the device, then click "open with file manager" it brings an error and says "malformed URL".
            This was a widespread problem for many. It's due to a race condition, so doesn't affect some systems. Dolphin thinks the device mount has failed, and gives an error, but it's just jumping the gun, the mount does succeed. See, f. ex., this bug report. The bug is in a KDE "frameworks" component called "Solid".

            First reported in 2016, it took over 2 years for a fix to reach end users. It was fixed for me in Cosmic, I think. In principle, you could get a fix through the backports or updates PPAs, but I don't know how to do just get that fix or if it is advisable to muck around like that. Perhaps someone else here can advise on whether you can cherry pick the frameworks fix.
            Regards, John Little

            Comment


              #7
              OK thanks guys. Hopefully I'll get an update to fix it. At least I have found a way to consistently be able to mount it, just not automatically.

              I will try dmesg output later this evening when I am back home.

              Cheers

              Comment


                #8
                If it's any help... Kubuntu 18.04 did that for me... when mounting partitions, it would come up with a red error box.
                Which was, as CR says, "not real". It was mounted, and simply clicking it again opened it.
                Not sure if it's the same thing, but

                It doesn't happen in Neon unstable (which tends to have faster updates - which is good for some things and bad for others ;·)
                So it's likely it will be fixed - eventually :·)

                Comment


                  #9
                  Originally posted by Don B. Cilly View Post
                  If it's any help... Kubuntu 18.04 did that for me... when mounting partitions, it would come up with a red error box.
                  Which was, as CR says, "not real". It was mounted, and simply clicking it again opened it.
                  Not sure if it's the same thing, but

                  It doesn't happen in Neon unstable (which tends to have faster updates - which is good for some things and bad for others ;·)
                  So it's likely it will be fixed - eventually :·)
                  OK, glad it's not just me. Hopefully they'll find a fix soon. It's not the end of the world, more of an irritation.

                  Still, I'd rather put up with it and manually mount it like that rather than put up with Windows and poorer security

                  Comment


                    #10
                    Originally posted by CanyonRoss View Post
                    Hopefully they'll find a fix soon.
                    Well, found it, they have. They just haven't released it yet

                    Comment


                      #11
                      Originally posted by Don B. Cilly View Post
                      They just haven't released it yet
                      I don't think they will for Bionic. The fix was coded years ago. I suspect that if you want the fix in Bionic, you'll need the updates PPA, or the backports PPA, or KDE Neon.
                      Regards, John Little

                      Comment

                      Working...
                      X