Greetings,
I tried installing the proprietary ATI/AMD drivers version 12.8. When I did so, X did not start and I have to purge the .deb packages I created/installed and re-install version 12.6. I have a switchable graphics system with an ATI 4200 embedded along with an ATI 5600 discreet adapter on an HP Pavilion DV6 with an AMD 64 processor. I would like to know what happened so that X would not start. (I tried a few times to install version 12.8 ).
I am not sure, but it seems like the X server is simply shutting down the monitor.
Any ideas what is going on?
I tried installing the proprietary ATI/AMD drivers version 12.8. When I did so, X did not start and I have to purge the .deb packages I created/installed and re-install version 12.6. I have a switchable graphics system with an ATI 4200 embedded along with an ATI 5600 discreet adapter on an HP Pavilion DV6 with an AMD 64 processor. I would like to know what happened so that X would not start. (I tried a few times to install version 12.8 ).
I am not sure, but it seems like the X server is simply shutting down the monitor.
Code:
[ 22.856]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 22.856] X Protocol Version 11, Revision 0
[ 22.856] Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu
[ 22.856] Current Operating System: Linux kubuntu-64 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64
[ 22.856] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-29-generic root=UUID=98fef471-56cb-4a15-9494-686381fda9eb ro resume=/dev/sda4 quiet splash vt.handoff=7
[ 22.856] Build Date: 04 August 2012 01:51:23AM
[ 22.856] xorg-server 2:1.11.4-0ubuntu10.7 (For technical support please see http://www.ubuntu.com/support)
[ 22.856] Current version of pixman: 0.24.4
[ 22.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.856] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 25 19:17:50 2012
[ 22.919] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.919] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 23.002] (==) ServerLayout "amdcccle Layout"
[ 23.002] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 23.002] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 23.145] (**) | |-->Device "aticonfig-Device[0]-0"
[ 23.145] (**) |-->Screen "aticonfig-Screen[1]-0" (1)
[ 23.145] (**) | |-->Monitor "aticonfig-Monitor[1]-0"
[ 23.146] (**) | |-->Device "aticonfig-Device[1]-0"
[ 23.146] (==) Automatically adding devices
[ 23.146] (==) Automatically enabling devices
[ 23.227] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 23.227] Entry deleted from font path.
[ 23.227] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 23.227] Entry deleted from font path.
[ 23.252] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 23.252] Entry deleted from font path.
[ 23.252] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 23.252] Entry deleted from font path.
[ 23.252] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/75dpi,
built-ins
[ 23.252] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 23.252] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.252] (II) Loader magic: 0x7fe8b5d5cb00
[ 23.252] (II) Module ABI versions:
[ 23.252] X.Org ANSI C Emulation: 0.4
[ 23.252] X.Org Video Driver: 11.0
[ 23.252] X.Org XInput driver : 16.0
[ 23.252] X.Org Server Extension : 6.0
[ 23.253] (--) PCI:*(0:1:5:0) 1002:9712:103c:1440 rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/65536, 0xf0300000/1048576, I/O @ 0x00004000/256
[ 23.253] (--) PCI: (0:2:0:0) 1002:68c1:103c:1440 rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 23.253] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.254] (II) "extmod" will be loaded by default.
[ 23.254] (II) "dbe" will be loaded by default.
[ 23.254] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 23.254] (II) "record" will be loaded by default.
[ 23.254] (II) "dri" will be loaded by default.
[ 23.254] (II) "dri2" will be loaded by default.
[ 23.254] (II) LoadModule: "glx"
[ 23.487] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[ 23.757] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 23.757] compiled for 6.9.0, module version = 1.0.0
[ 23.757] (II) Loading extension GLX
[ 23.757] (II) LoadModule: "extmod"
[ 23.860] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.905] (II) Module extmod: vendor="X.Org Foundation"
[ 23.905] compiled for 1.11.3, module version = 1.0.0
[ 23.905] Module class: X.Org Server Extension
[ 23.905] ABI class: X.Org Server Extension, version 6.0
[ 23.905] (II) Loading extension MIT-SCREEN-SAVER
[ 23.905] (II) Loading extension XFree86-VidModeExtension
[ 23.905] (II) Loading extension XFree86-DGA
[ 23.905] (II) Loading extension DPMS
[ 23.905] (II) Loading extension XVideo
[ 23.905] (II) Loading extension XVideo-MotionCompensation
[ 23.905] (II) Loading extension X-Resource
[ 23.905] (II) LoadModule: "dbe"
[ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.938] (II) Module dbe: vendor="X.Org Foundation"
[ 23.938] compiled for 1.11.3, module version = 1.0.0
[ 23.938] Module class: X.Org Server Extension
[ 23.938] ABI class: X.Org Server Extension, version 6.0
[ 23.938] (II) Loading extension DOUBLE-BUFFER
[ 23.938] (II) LoadModule: "record"
[ 23.939] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.953] (II) Module record: vendor="X.Org Foundation"
[ 23.953] compiled for 1.11.3, module version = 1.13.0
[ 23.953] Module class: X.Org Server Extension
[ 23.953] ABI class: X.Org Server Extension, version 6.0
[ 23.954] (II) Loading extension RECORD
[ 23.954] (II) LoadModule: "dri"
[ 23.954] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.967] (II) Module dri: vendor="X.Org Foundation"
[ 23.967] compiled for 1.11.3, module version = 1.0.0
[ 23.967] ABI class: X.Org Server Extension, version 6.0
[ 23.967] (II) Loading extension XFree86-DRI
[ 23.967] (II) LoadModule: "dri2"
[ 23.967] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.982] (II) Module dri2: vendor="X.Org Foundation"
[ 23.982] compiled for 1.11.3, module version = 1.2.0
[ 23.982] ABI class: X.Org Server Extension, version 6.0
[ 23.982] (II) Loading extension DRI2
[ 23.982] (II) LoadModule: "fglrx"
[ 23.982] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[ 24.867] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 24.867] compiled for 1.4.99.906, module version = 8.98.2
[ 24.867] Module class: X.Org Video Driver
[ 24.868] (II) Loading sub module "fglrxdrm"
[ 24.868] (II) LoadModule: "fglrxdrm"
[ 24.868] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 24.934] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 24.934] compiled for 1.4.99.906, module version = 8.98.2
[ 24.958] (II) AMD Proprietary Linux Driver Version Identifier:8.98.2
[ 24.958] (II) AMD Proprietary Linux Driver Release Identifier: 8.982
[ 24.958] (II) AMD Proprietary Linux Driver Build Date: Jul 27 2012 20:37:56
[ 24.958] (++) using VT number 7
[ 24.958] (WW) Falling back to old probe method for fglrx
[ 25.225] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 25.228] ukiDynamicMajor: found major device number 250
[ 25.228] ukiDynamicMajor: found major device number 250
[ 25.228] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 25.228] ukiOpenDevice: node name is /dev/ati/card0
[ 25.228] ukiOpenDevice: open result is 8, (OK)
[ 25.229] ukiOpenByBusid: ukiOpenMinor returns 8
[ 25.229] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 25.252] (WW) PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode.
[ 25.254] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:0) found
[ 25.264] (WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
[ 25.264] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 25.264] (II) AMD Video driver is signed
[ 25.265] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[ 25.265] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 25.265] (II) fglrx(0): pEnt->device->identifier=0x7fe8b7328570
[ 25.265] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 25.283] (WW) fglrx(0): PowerXpress feature is not supported on A+A Mux platform. Force to UMA mode.
[ 25.284] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 25.284] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 25.284] (==) fglrx(0): Default visual is TrueColor
[ 25.284] (**) fglrx(0): Option "DPMS" "true"
[ 25.284] (==) fglrx(0): RGB weight 888
[ 25.284] (II) fglrx(0): Using 8 bits per RGB
[ 25.284] (==) fglrx(0): Buffer Tiling is ON
[ 25.285] (II) Loading sub module "fglrxdrm"
[ 25.285] (II) LoadModule: "fglrxdrm"
[ 25.285] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 25.285] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 25.285] compiled for 1.4.99.906, module version = 8.98.2
[ 25.287] ukiDynamicMajor: found major device number 250
[ 25.287] ukiDynamicMajor: found major device number 250
[ 25.287] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 25.287] ukiOpenDevice: node name is /dev/ati/card0
[ 25.287] ukiOpenDevice: open result is 13, (OK)
[ 25.287] ukiOpenByBusid: ukiOpenMinor returns 13
[ 25.287] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 25.287] (**) fglrx(0): NoAccel = NO
[ 25.287] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 25.287] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[ 25.287] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1440)
[ 25.287] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 25.287] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 25.287] (--) fglrx(0): MMIO registers at 0xf0200000
[ 25.287] (--) fglrx(0): I/O port at 0x00003000
[ 25.287] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 25.309] (II) fglrx(0): ATIF platform detected
[ 25.310] (II) fglrx(0): AC Adapter is used
[ 25.773] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 25.773] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 25.773] (II) fglrx(0): PCIE card detected
[ 25.773] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.773] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.788] (II) fglrx(0): Using adapter: 2:0.0.
[ 25.798] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 25.809] (II) fglrx(0): Interrupt handler installed at IRQ 45.
[ 25.809] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.809] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.809] (==) fglrx(0): Center Mode is disabled
[ 25.809] (II) Loading sub module "fb"
[ 25.809] (II) LoadModule: "fb"
[ 25.809] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.942] (II) Module fb: vendor="X.Org Foundation"
[ 25.942] compiled for 1.11.3, module version = 1.0.0
[ 25.942] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.942] (II) Loading sub module "ddc"
[ 25.942] (II) LoadModule: "ddc"
[ 25.942] (II) Module "ddc" already built-in
[ 26.210] (II) fglrx(0): Finished Initialize PPLIB!
[ 26.232] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[1]-0
[ 26.233] (II) fglrx(0): Output DFP1 has no monitor section
[ 26.233] (II) fglrx(0): Output CRT1 has no monitor section
[ 26.233] (II) Loading sub module "ddc"
[ 26.233] (II) LoadModule: "ddc"
[ 26.233] (II) Module "ddc" already built-in
[ 26.233] (II) fglrx(0): Connected Display0: LVDS
[ 26.233] (II) fglrx(0): Display0 EDID data ---------------------------
[ 26.233] (II) fglrx(0): Manufacturer: SEC Model: 3651 Serial#: 0
[ 26.233] (II) fglrx(0): Year: 2008 Week: 0
[ 26.233] (II) fglrx(0): EDID Version: 1.3
[ 26.233] (II) fglrx(0): Digital Display Input
[ 26.233] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 26.233] (II) fglrx(0): Gamma: 2.20
[ 26.233] (II) fglrx(0): No DPMS capabilities specified
[ 26.233] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.233] (II) fglrx(0): First detailed timing is preferred mode
[ 26.233] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 26.233] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 26.233] (II) fglrx(0): Manufacturer's mask: 0
[ 26.233] (II) fglrx(0): Supported detailed timing:
[ 26.233] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 26.233] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 26.233] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 26.233] (II) fglrx(0): Unknown vendor-specific block f
[ 26.233] (II) fglrx(0): SAMSUNG
[ 26.233] (II) fglrx(0): 156AT05-H01
[ 26.233] (II) fglrx(0): EDID (in hex):
[ 26.233] (II) fglrx(0): 00ffffffffffff004ca3513600000000
[ 26.233] (II) fglrx(0): 00120103802213780a87f594574f8c27
[ 26.233] (II) fglrx(0): 27505400000001010101010101010101
[ 26.233] (II) fglrx(0): 010101010101121b567250000c303020
[ 26.233] (II) fglrx(0): 250058c2100000190000000f00000000
[ 26.233] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 26.233] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 26.233] (II) fglrx(0): 00313536415430352d4830310a200015
[ 26.233] (II) fglrx(0): End of Display0 EDID data --------------------
[ 26.234] (II) fglrx(0): EDID for output LVDS
[ 26.234] (II) fglrx(0): Manufacturer: SEC Model: 3651 Serial#: 0
[ 26.234] (II) fglrx(0): Year: 2008 Week: 0
[ 26.234] (II) fglrx(0): EDID Version: 1.3
[ 26.234] (II) fglrx(0): Digital Display Input
[ 26.234] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 26.234] (II) fglrx(0): Gamma: 2.20
[ 26.234] (II) fglrx(0): No DPMS capabilities specified
[ 26.234] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 26.234] (II) fglrx(0): First detailed timing is preferred mode
[ 26.234] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 26.234] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 26.234] (II) fglrx(0): Manufacturer's mask: 0
[ 26.234] (II) fglrx(0): Supported detailed timing:
[ 26.234] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 26.234] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 26.234] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 26.234] (II) fglrx(0): Unknown vendor-specific block f
[ 26.234] (II) fglrx(0): SAMSUNG
[ 26.234] (II) fglrx(0): 156AT05-H01
[ 26.234] (II) fglrx(0): EDID (in hex):
[ 26.234] (II) fglrx(0): 00ffffffffffff004ca3513600000000
[ 26.234] (II) fglrx(0): 00120103802213780a87f594574f8c27
[ 26.234] (II) fglrx(0): 27505400000001010101010101010101
[ 26.234] (II) fglrx(0): 010101010101121b567250000c303020
[ 26.234] (II) fglrx(0): 250058c2100000190000000f00000000
[ 26.234] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 26.234] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 26.234] (II) fglrx(0): 00313536415430352d4830310a200015
[ 26.234] (II) fglrx(0): EDID vendor "SEC", prod id 13905
[ 26.234] (II) fglrx(0): Printing DDC gathered Modelines:
[ 26.234] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Printing probed modes for output LVDS
[ 26.234] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1414 1446 1480 720 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1414 1446 1480 600 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1414 1446 1480 600 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1414 1446 1480 480 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1414 1446 1480 480 770 775 780 -hsync -vsync (46.8 kHz)
[ 26.234] (II) fglrx(0): EDID for output DFP1
[ 26.234] (II) fglrx(0): EDID for output CRT1
[ 26.234] (II) fglrx(0): Output LVDS connected
[ 26.234] (II) fglrx(0): Output DFP1 disconnected
[ 26.234] (II) fglrx(0): Output CRT1 disconnected
[ 26.234] (II) fglrx(0): Using exact sizes for initial modes
[ 26.234] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 26.234] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 26.234] (II) fglrx(0): DPI set to (102, 102)
[ 26.234] (II) fglrx(0): Eyefinity capable adapter detected.
[ 26.234] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected.
[ 26.234] (==) fglrx(0): PseudoColor visuals disabled
[ 26.234] (II) Loading sub module "ramdac"
[ 26.234] (II) LoadModule: "ramdac"
[ 26.234] (II) Module "ramdac" already built-in
[ 26.234] (==) fglrx(0): NoDRI = NO
[ 26.234] (==) fglrx(0): Capabilities: 0x00000000
[ 26.234] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 26.235] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 26.235] (==) fglrx(0): UseFastTLS=0
[ 26.235] (--) Depth 24 pixmap format is 32 bpp
[ 26.235] (II) Loading extension ATIFGLRXDRI
[ 26.235] (II) fglrx(0): doing swlDriScreenInit
[ 26.235] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 26.235] ukiDynamicMajor: found major device number 250
[ 26.235] ukiDynamicMajor: found major device number 250
[ 26.235] ukiDynamicMajor: found major device number 250
[ 26.235] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 26.235] ukiOpenDevice: node name is /dev/ati/card0
[ 26.235] ukiOpenDevice: open result is 14, (OK)
[ 26.235] ukiOpenByBusid: ukiOpenMinor returns 14
[ 26.235] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 26.235] (II) fglrx(0): [uki] DRM interface version 1.0
[ 26.235] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:2:0:0"
[ 26.235] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 26.235] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fe8b595f000
[ 26.235] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 26.235] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 26.235] (II) fglrx(0): swlDriScreenInit done
[ 26.235] (II) fglrx(0): Kernel Module Version Information:
[ 26.235] (II) fglrx(0): Name: fglrx
[ 26.235] (II) fglrx(0): Version: 8.98.2
[ 26.235] (II) fglrx(0): Date: Jul 27 2012
[ 26.235] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 26.235] (II) fglrx(0): Kernel Module version matches driver.
[ 26.235] (II) fglrx(0): Kernel Module Build Time Information:
[ 26.235] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-29-generic
[ 26.235] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 26.235] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 26.235] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 26.235] (II) fglrx(0): [uki] register handle = 0x00004000
[ 26.322] (II) fglrx(0): DRI initialization successfull
[ 26.362] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[ 26.406] (==) fglrx(0): Backing store disabled
[ 26.406] (II) Loading extension FGLRXEXTENSION
[ 26.406] (**) fglrx(0): DPMS enabled
[ 26.407] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 26.407] (**) fglrx(0): Textured Video is enabled.
[ 26.407] (II) LoadModule: "glesx"
[ 26.407] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[ 26.681] (II) Module glesx: vendor="X.Org Foundation"
[ 26.681] compiled for 1.4.99.906, module version = 1.0.0
[ 26.681] (II) Loading extension GLESX
[ 26.681] (II) fglrx(0): GLESX enableFlags = 592
[ 26.698] (II) fglrx(0): GLESX is enabled
[ 26.698] (II) LoadModule: "amdxmm"
[ 26.698] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[ 26.748] (II) Module amdxmm: vendor="X.Org Foundation"
[ 26.748] compiled for 1.4.99.906, module version = 2.0.0
[ 26.757] (II) Loading extension AMDXVOPL
[ 26.757] (II) Loading extension AMDXVBA
[ 26.797] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 26.808] (II) fglrx(0): Enable composite support successfully
[ 26.808] (WW) fglrx(0): Option "VendorName" is not used
[ 26.808] (WW) fglrx(0): Option "ModelName" is not used
[ 26.808] (II) fglrx(0): X context handle = 0x1
[ 26.808] (II) fglrx(0): [DRI] installation complete
[ 26.808] (==) fglrx(0): Silken mouse enabled
[ 26.809] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 26.809] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 26.809] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 26.809] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 27.897] (--) RandR disabled
[ 27.897] (II) Initializing built-in extension Generic Event Extension
[ 27.897] (II) Initializing built-in extension SHAPE
[ 27.897] (II) Initializing built-in extension MIT-SHM
[ 27.897] (II) Initializing built-in extension XInputExtension
[ 27.897] (II) Initializing built-in extension XTEST
[ 27.897] (II) Initializing built-in extension BIG-REQUESTS
[ 27.897] (II) Initializing built-in extension SYNC
[ 27.897] (II) Initializing built-in extension XKEYBOARD
[ 27.897] (II) Initializing built-in extension XC-MISC
[ 27.897] (II) Initializing built-in extension SECURITY
[ 27.898] (II) Initializing built-in extension XINERAMA
[ 27.898] (II) Initializing built-in extension XFIXES
[ 27.898] (II) Initializing built-in extension RENDER
[ 27.898] (II) Initializing built-in extension RANDR
[ 27.898] (II) Initializing built-in extension COMPOSITE
[ 27.898] (II) Initializing built-in extension DAMAGE
[ 28.011] ukiDynamicMajor: found major device number 250
[ 28.012] ukiDynamicMajor: found major device number 250
[ 28.012] ukiOpenByBusid: Searching for BusID PCI:2:0:0
[ 28.012] ukiOpenDevice: node name is /dev/ati/card0
[ 28.012] ukiOpenDevice: open result is 16, (OK)
[ 28.012] ukiOpenByBusid: ukiOpenMinor returns 16
[ 28.012] ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
[ 30.070] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 30.070] (II) fglrx(0): Enable the clock gating!
[ 30.070] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 30.251] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 30.263] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 30.263] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.263] (II) LoadModule: "evdev"
[ 30.264] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.293] (II) Module evdev: vendor="X.Org Foundation"
[ 30.293] compiled for 1.11.3, module version = 2.7.0
[ 30.293] Module class: X.Org XInput Driver
[ 30.293] ABI class: X.Org XInput driver, version 16.0
[ 30.293] (II) Using input driver 'evdev' for 'Power Button'
[ 30.293] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.293] (**) Power Button: always reports core events
[ 30.293] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 30.293] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.293] (--) evdev: Power Button: Found keys
[ 30.293] (II) evdev: Power Button: Configuring as keyboard
[ 30.293] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 30.293] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 30.293] (**) Option "xkb_rules" "evdev"
[ 30.293] (**) Option "xkb_model" "pc105"
[ 30.293] (**) Option "xkb_layout" "us"
[ 30.293] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 30.294] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.294] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.294] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.294] (**) Video Bus: always reports core events
[ 30.294] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 30.294] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.294] (--) evdev: Video Bus: Found keys
[ 30.294] (II) evdev: Video Bus: Configuring as keyboard
[ 30.294] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4/event4"
[ 30.294] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 30.294] (**) Option "xkb_rules" "evdev"
[ 30.294] (**) Option "xkb_model" "pc105"
[ 30.294] (**) Option "xkb_layout" "us"
[ 30.294] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 30.294] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 30.294] (II) Using input driver 'evdev' for 'Video Bus'
[ 30.294] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.294] (**) Video Bus: always reports core events
[ 30.294] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 30.294] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 30.294] (--) evdev: Video Bus: Found keys
[ 30.294] (II) evdev: Video Bus: Configuring as keyboard
[ 30.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5/event5"
[ 30.295] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 30.295] (**) Option "xkb_rules" "evdev"
[ 30.295] (**) Option "xkb_model" "pc105"
[ 30.295] (**) Option "xkb_layout" "us"
[ 30.295] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.295] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.295] (II) Using input driver 'evdev' for 'Power Button'
[ 30.295] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.295] (**) Power Button: always reports core events
[ 30.295] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 30.295] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 30.295] (--) evdev: Power Button: Found keys
[ 30.295] (II) evdev: Power Button: Configuring as keyboard
[ 30.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.295] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 30.295] (**) Option "xkb_rules" "evdev"
[ 30.295] (**) Option "xkb_model" "pc105"
[ 30.295] (**) Option "xkb_layout" "us"
[ 30.296] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 30.296] (II) No input driver specified, ignoring this device.
[ 30.296] (II) This device may have been added with another device file.
[ 30.296] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event13)
[ 30.296] (II) No input driver specified, ignoring this device.
[ 30.296] (II) This device may have been added with another device file.
[ 30.297] (II) config/udev: Adding input device HP Webcam (/dev/input/event10)
[ 30.297] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[ 30.297] (II) Using input driver 'evdev' for 'HP Webcam'
[ 30.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.297] (**) HP Webcam: always reports core events
[ 30.297] (**) evdev: HP Webcam: Device: "/dev/input/event10"
[ 30.297] (--) evdev: HP Webcam: Vendor 0x64e Product 0xf209
[ 30.297] (--) evdev: HP Webcam: Found keys
[ 30.297] (II) evdev: HP Webcam: Configuring as keyboard
[ 30.297] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10/event10"
[ 30.297] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 10)
[ 30.297] (**) Option "xkb_rules" "evdev"
[ 30.297] (**) Option "xkb_model" "pc105"
[ 30.297] (**) Option "xkb_layout" "us"
[ 30.297] (II) config/udev: Adding input device reserved Dynex Watermelon Wireless Mice (/dev/input/event6)
[ 30.297] (**) reserved Dynex Watermelon Wireless Mice: Applying InputClass "evdev pointer catchall"
[ 30.297] (II) Using input driver 'evdev' for 'reserved Dynex Watermelon Wireless Mice'
[ 30.297] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.298] (**) reserved Dynex Watermelon Wireless Mice: always reports core events
[ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: Device: "/dev/input/event6"
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Vendor 0x19ff Product 0x225
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found 9 mouse buttons
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found scroll wheel(s)
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found relative axes
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found x and y relative axes
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found absolute axes
[ 30.298] (--) evdev: reserved Dynex Watermelon Wireless Mice: Found absolute multitouch axes
[ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Forcing absolute x/y axes to exist.
[ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Configuring as mouse
[ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: Adding scrollwheel support
[ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: YAxisMapping: buttons 4 and 5
[ 30.298] (**) evdev: reserved Dynex Watermelon Wireless Mice: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.298] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6/event6"
[ 30.298] (II) XINPUT: Adding extended input device "reserved Dynex Watermelon Wireless Mice" (type: MOUSE, id 11)
[ 30.298] (II) evdev: reserved Dynex Watermelon Wireless Mice: initialized for relative axes.
[ 30.298] (WW) evdev: reserved Dynex Watermelon Wireless Mice: ignoring absolute axes.
[ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) keeping acceleration scheme 1
[ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration profile 0
[ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration factor: 2.000
[ 30.298] (**) reserved Dynex Watermelon Wireless Mice: (accel) acceleration threshold: 4
[ 30.298] (II) config/udev: Adding input device reserved Dynex Watermelon Wireless Mice (/dev/input/mouse0)
[ 30.298] (II) No input driver specified, ignoring this device.
[ 30.298] (II) This device may have been added with another device file.
[ 30.299] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event11)
[ 30.299] (II) No input driver specified, ignoring this device.
[ 30.299] (II) This device may have been added with another device file.
[ 30.299] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event12)
[ 30.299] (II) No input driver specified, ignoring this device.
[ 30.299] (II) This device may have been added with another device file.
[ 30.299] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 30.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 30.299] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.299] (**) AT Translated Set 2 keyboard: always reports core events
[ 30.299] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 30.299] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 30.299] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 30.299] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 30.299] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 30.299] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 30.299] (**) Option "xkb_rules" "evdev"
[ 30.299] (**) Option "xkb_model" "pc105"
[ 30.299] (**) Option "xkb_layout" "us"
[ 30.300] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 30.300] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 30.300] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 30.300] (II) LoadModule: "synaptics"
[ 30.301] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.318] (II) Module synaptics: vendor="X.Org Foundation"
[ 30.318] compiled for 1.11.3, module version = 1.6.2
[ 30.318] Module class: X.Org XInput Driver
[ 30.318] ABI class: X.Org XInput driver, version 16.0
[ 30.318] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 30.318] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 30.318] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.318] (**) Option "Device" "/dev/input/event9"
[ 30.320] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 30.320] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4550
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 30.320] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 30.320] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 30.324] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 30.324] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 30.324] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 30.324] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 30.324] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 30.325] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 30.325] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 30.325] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[ 30.325] (II) No input driver specified, ignoring this device.
[ 30.325] (II) This device may have been added with another device file.
[ 30.325] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 30.325] (II) No input driver specified, ignoring this device.
[ 30.325] (II) This device may have been added with another device file.
[ 30.327] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 30.327] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 30.327] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 30.327] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.327] (**) HP WMI hotkeys: always reports core events
[ 30.327] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event7"
[ 30.327] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 30.327] (--) evdev: HP WMI hotkeys: Found keys
[ 30.327] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 30.327] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 30.327] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 30.327] (**) Option "xkb_rules" "evdev"
[ 30.327] (**) Option "xkb_model" "pc105"
[ 30.327] (**) Option "xkb_layout" "us"
[ 30.356] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 87.328] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 87.328] (II) fglrx(0): Backup framebuffer data.
[ 87.333] (II) fglrx(0): Backup complete.
[ 316.393] (II) evdev: HP WMI hotkeys: Close
[ 316.393] (II) UnloadModule: "evdev"
[ 316.393] (II) Unloading evdev
[ 316.393] (II) UnloadModule: "synaptics"
[ 316.393] (II) Unloading synaptics
[ 316.393] (II) evdev: AT Translated Set 2 keyboard: Close
[ 316.393] (II) UnloadModule: "evdev"
[ 316.393] (II) Unloading evdev
[ 316.393] (II) evdev: reserved Dynex Watermelon Wireless Mice: Close
[ 316.393] (II) UnloadModule: "evdev"
[ 316.393] (II) Unloading evdev
[ 316.393] (II) evdev: HP Webcam: Close
[ 316.393] (II) UnloadModule: "evdev"
[ 316.393] (II) Unloading evdev
[ 316.393] (II) evdev: Power Button: Close
[ 316.393] (II) UnloadModule: "evdev"
[ 316.393] (II) Unloading evdev
[ 316.394] (II) evdev: Video Bus: Close
[ 316.394] (II) UnloadModule: "evdev"
[ 316.394] (II) Unloading evdev
[ 316.394] (II) evdev: Video Bus: Close
[ 316.394] (II) UnloadModule: "evdev"
[ 316.394] (II) Unloading evdev
[ 316.394] (II) evdev: Power Button: Close
[ 316.394] (II) UnloadModule: "evdev"
[ 316.394] (II) Unloading evdev
[ 316.405] (II) fglrx(0): Shutdown CMMQS
[ 316.405] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 316.405] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7fe8b595f000
[ 316.407] (II) fglrx(0): Interrupt handler Shutdown.
[ 316.430] ddxSigGiveUp: Closing log
[ 316.430] Server terminated successfully (0). Closing log file.




Comment