Announcement

**gytarman** · Jul 17, 2011, 08:04 PM

Re: Logout fails to complete (improved)

I see that the last post for this message was on May 4th. I am experiencing this same problem. I have JUST installed Kubuntu 11.4. I am a linux newbie and so don't know much but I'm pretty sure that I'm not supposed to have a black screen with a mouse pointer when I choose the log out option. The only thing that I'm able to do is to restart the computer.

Any help would be appreciated.

**Teunis** · Jul 17, 2011, 08:10 PM

Re: Logout fails to complete (improved)

What happens when you log out 'manually' by typing the following into a Terminal:

Code:

sudo shutdown -h now

(You have to enter your password)

**gytarman** · Jul 17, 2011, 08:32 PM

Re: Logout fails to complete (improved)

It shuts the machine down

**rfakhrai** · Jul 17, 2011, 09:36 PM

Re: Logout fails to complete (improved)

We need some information about your video setup. What's the make/model of your video card? lspci in a terminal will tell you this information. What driver are you using? Proprietary?

**gytarman** · Jul 17, 2011, 09:59 PM

Re: Logout fails to complete (improved)

Hope this isn't too much information - this is the output of the lspci command.

Code:

00:00.0 Host bridge: Intel Corporation 82925X/XE Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82925X/XE PCI Express Root Port (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
04:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem

I suspect that the driver is proprietary. It was installed by default when I installed the OS. I have not changed anything.

**rfakhrai** · Jul 18, 2011, 09:20 PM

Re: Logout fails to complete (improved)

Originally posted by Myklawk

Hope this isn't too much information - this is the output of the lspci command.
00:00.0 Host bridge: Intel Corporation 82925X/XE Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82925X/XE PCI Express Root Port (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
01:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:00.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
04:02.0 Communication controller: Conexant Systems, Inc. HSF 56k Data/Fax Modem

In bold is your video card, X300SE. A couple more things:

1) Did you do a clean install of 11.04 or an upgrade?
2) Is your system up-to-date? Run sudo apt-get update && sudo apt-get dist-upgrade in Konsole and reboot.
3) When you get the blank screen with the mouse pointer, are you able to press esc and get any error messages?
4) Please post the output of cat /var/log/Xorg.0.log

**Snowhog** · Jul 18, 2011, 09:24 PM

Re: Logout fails to complete (improved)

Meaning, type:

Code:

cat /var/log/Xorg.0.log | grep [EE]

**rfakhrai** · Jul 18, 2011, 09:25 PM

Re: Logout fails to complete (improved)

yeah, or that ...

**gytarman** · Jul 19, 2011, 03:22 PM

Re: Logout fails to complete (improved)

Yikes! This looks like an "...everything you needed to know and were afraid to ask..." kind of output.

Thanks again for any assistance anyone can provide.

Code:

[  20.212] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic root=UUID=2f6e8cbe-a176-4d9b-bec2-7b39a63b1f40 ro quiet splash vt.handoff=7
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  20.219]  Entry deleted from font path.
[  20.219]  Entry deleted from font path.
[  20.219]  Entry deleted from font path.
[  20.219]  Entry deleted from font path.
[  20.219]  Entry deleted from font path.
[  20.220]  X.Org ANSI C Emulation: 0.4
[  20.220]  X.Org Server Extension : 5.0
[  20.230]  Module class: X.Org Server Extension
[  20.230]  ABI class: X.Org Server Extension, version 5.0
[  20.230] (II) Loading extension MIT-SCREEN-SAVER
[  20.230] (II) Loading extension XFree86-VidModeExtension
[  20.231]  Module class: X.Org Server Extension
[  20.231]  ABI class: X.Org Server Extension, version 5.0
[  20.231] (II) Loading extension DOUBLE-BUFFER
[  20.232]  ABI class: X.Org Server Extension, version 5.0
[  20.233]  Module class: X.Org Server Extension
[  20.233]  ABI class: X.Org Server Extension, version 5.0
[  20.233] (II) Loading extension RECORD
[  20.239]  ABI class: X.Org Server Extension, version 5.0
[  20.240]  ABI class: X.Org Server Extension, version 5.0
[  20.245] (EE) Failed to load module "fglrx" (module does not exist, 0)
[  20.247] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    AMD Radeon HD 6250 Graphics, CYPRESS,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, AMD Radeon HD 6900M Series,
[  20.255] (II) VESA: driver for VESA chipsets: vesa
[  20.255] (II) FBDEV: driver for framebuffer: fbdev
[  20.257] (II) RADEON(0): Creating default Display subsection in Screen section
[  20.257] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[  20.257] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  20.257] (==) RADEON(0): Default visual is TrueColor
[  20.257] (==) RADEON(0): RGB weight 888
[  20.257] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[  20.257] (--) RADEON(0): Chipset: "ATI Radeon X300 (RV370) 5B60 (PCIE)" (ChipID = 0x5b60)
[  20.258] (II) RADEON(0): PCIE card detected
[  20.258] (II) RADEON(0): KMS Color Tiling: enabled
[  20.258] (II) RADEON(0): KMS Pageflipping: enabled
[  20.258] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[  20.268] (II) RADEON(0): Output VGA-0 has no monitor section
[  20.357] (II) RADEON(0): Output DVI-0 has no monitor section
[  20.392] (II) RADEON(0): Output S-video has no monitor section
[  20.404] (II) RADEON(0): EDID for output VGA-0
[  20.484] (II) RADEON(0): EDID for output DVI-0
[  20.484] (II) RADEON(0): Manufacturer: DEL Model: 4005 Serial#: 1128486730
[  20.484] (II) RADEON(0): Year: 2004 Week: 44
[  20.484] (II) RADEON(0): EDID Version: 1.3
[  20.484] (II) RADEON(0): Digital Display Input
[  20.484] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[  20.485] (II) RADEON(0): Gamma: 2.20
[  20.485] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[  20.485] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  20.485] (II) RADEON(0): Default color space is primary color space
[  20.485] (II) RADEON(0): First detailed timing is preferred mode
[  20.485] (II) RADEON(0): redX: 0.644 redY: 0.338  greenX: 0.270 greenY: 0.602
[  20.485] (II) RADEON(0): blueX: 0.140 blueY: 0.084  whiteX: 0.313 whiteY: 0.329
[  20.485] (II) RADEON(0): Supported established timings:
[  20.485] (II) RADEON(0): 720x400@70Hz
[  20.485] (II) RADEON(0): 640x480@60Hz
[  20.485] (II) RADEON(0): 640x480@75Hz
[  20.485] (II) RADEON(0): 800x600@60Hz
[  20.485] (II) RADEON(0): 800x600@75Hz
[  20.485] (II) RADEON(0): 1024x768@60Hz
[  20.485] (II) RADEON(0): 1024x768@75Hz
[  20.485] (II) RADEON(0): 1280x1024@75Hz
[  20.485] (II) RADEON(0): Manufacturer's mask: 0
[  20.485] (II) RADEON(0): Supported standard timings:
[  20.485] (II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[  20.485] (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[  20.485] (II) RADEON(0): Supported detailed timing:
[  20.485] (II) RADEON(0): clock: 108.0 MHz  Image Size: 338 x 270 mm
[  20.485] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[  20.485] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[  20.485] (II) RADEON(0): Serial No: Y42994APCCWJ
[  20.485] (II) RADEON(0): Monitor name: DELL 1704FPT
[  20.485] (II) RADEON(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[  20.485] (II) RADEON(0): EDID (in hex):
[  20.485] (II) RADEON(0):  00ffffffffffff0010ac05404a574343
[  20.485] (II) RADEON(0):  2c0e010380221b78eee0e5a456459a23
[  20.485] (II) RADEON(0):  155054a54b00714f8180010101010101
[  20.485] (II) RADEON(0):  010101010101302a009851002a403070
[  20.485] (II) RADEON(0):  1300520e1100001e000000ff00593432
[  20.485] (II) RADEON(0):  39393441504343574a0a000000fc0044
[  20.485] (II) RADEON(0):  454c4c20313730344650540a000000fd
[  20.485] (II) RADEON(0):  00384c1e510e000a202020202020006c
[  20.485] (II) RADEON(0): Printing probed modes for output DVI-0
[  20.485] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[  20.485] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[  20.485] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[  20.485] (II) RADEON(0): Modeline "1024x768"x75.1  78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[  20.486] (II) RADEON(0): Modeline "1024x768"x60.0  65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[  20.486] (II) RADEON(0): Modeline "800x600"x75.0  49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[  20.486] (II) RADEON(0): Modeline "800x600"x60.3  40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[  20.486] (II) RADEON(0): Modeline "640x480"x75.0  31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[  20.486] (II) RADEON(0): Modeline "640x480"x60.0  25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[  20.486] (II) RADEON(0): Modeline "720x400"x70.1  28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[  20.511] (II) RADEON(0): EDID for output S-video
[  20.511] (II) RADEON(0): Output VGA-0 disconnected
[  20.511] (II) RADEON(0): Output DVI-0 connected
[  20.511] (II) RADEON(0): Output S-video disconnected
[  20.511] (II) RADEON(0): Using exact sizes for initial modes
[  20.511] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
[  20.511] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  20.511] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:8000000 visible:7ac0000
[  20.511] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[  20.511] (==) RADEON(0): DPI set to (96, 96)
[  20.513]  ABI class: X.Org ANSI C Emulation, version 0.4
[  20.514] (II) RADEON(0): [DRI2] Setup complete
[  20.514] (II) RADEON(0): [DRI2]  DRI driver: r300
[  20.515] (II) RADEON(0): Front buffer size: 5120K
[  20.515] (II) RADEON(0): VRAM usage limit set to 108518K
[  20.515] (==) RADEON(0): Backing store disabled
[  20.515] (II) RADEON(0): Direct rendering enabled
[  20.515] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[  20.515] (II) RADEON(0): Setting EXA maxPitchBytes
[  20.515] (II) EXA(0): Driver allocated offscreen pixmaps
[  20.515] (II) EXA(0): Driver registered support for the following operations:
[  20.515] (II)     Composite (RENDER acceleration)
[  20.515] (II) RADEON(0): Acceleration enabled
[  20.515] (==) RADEON(0): DPMS enabled
[  20.515] (==) RADEON(0): Silken mouse enabled
[  20.515] (II) RADEON(0): Set up textured video
[  20.515] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  20.520] (II) Initializing built-in extension Generic Event Extension
[  20.520] (II) Initializing built-in extension SHAPE
[  20.520] (II) Initializing built-in extension XInputExtension
[  20.520] (II) Initializing built-in extension XTEST
[  20.520] (II) Initializing built-in extension BIG-REQUESTS
[  20.520] (II) Initializing built-in extension XKEYBOARD
[  20.520] (II) Initializing built-in extension SECURITY
[  20.520] (II) Initializing built-in extension XINERAMA
[  20.520] (II) Initializing built-in extension XFIXES
[  20.520] (II) Initializing built-in extension RENDER
[  20.520] (II) Initializing built-in extension COMPOSITE
[  20.520] (II) Initializing built-in extension DAMAGE
[  20.520] (II) Initializing built-in extension GESTURE
[  20.592] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  20.592] (II) AIGLX: enabled GLX_INTEL_swap_event
[  20.593] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  20.593] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  20.595] (II) RADEON(0): Setting screen physical size to 338 x 270
[  20.697] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[  20.820] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  20.848] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  20.876] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[  20.892] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  20.892] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[  74.839] (II) RADEON(0): EDID vendor "DEL", prod id 16389
[  74.839] (II) RADEON(0): Using EDID range info for horizontal sync
[  74.839] (II) RADEON(0): Using EDID range info for vertical refresh
[  74.839] (II) RADEON(0): Printing DDC gathered Modelines:
[  74.839] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[  74.839] (II) RADEON(0): Modeline "800x600"x0.0  40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[  74.839] (II) RADEON(0): Modeline "640x480"x0.0  31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[  74.839] (II) RADEON(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[  74.839] (II) RADEON(0): Modeline "720x400"x0.0  28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[  74.839] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[  74.839] (II) RADEON(0): Modeline "1024x768"x0.0  78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[  74.839] (II) RADEON(0): Modeline "1024x768"x0.0  65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[  74.839] (II) RADEON(0): Modeline "800x600"x0.0  49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[  74.839] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[  85.220] (II) RADEON(0): EDID vendor "DEL", prod id 16389
[  85.220] (II) RADEON(0): Using hsync ranges from config file
[  85.220] (II) RADEON(0): Using vrefresh ranges from config file
[  85.220] (II) RADEON(0): Printing DDC gathered Modelines:
[  85.220] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[  85.220] (II) RADEON(0): Modeline "800x600"x0.0  40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[  85.220] (II) RADEON(0): Modeline "640x480"x0.0  31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[  85.220] (II) RADEON(0): Modeline "640x480"x0.0  25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[  85.220] (II) RADEON(0): Modeline "720x400"x0.0  28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[  85.220] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[  85.220] (II) RADEON(0): Modeline "1024x768"x0.0  78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[  85.220] (II) RADEON(0): Modeline "1024x768"x0.0  65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[  85.220] (II) RADEON(0): Modeline "800x600"x0.0  49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[  85.221] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[  135.099] (II) XKB: reuse xkmfile /var/lib/xkb/server-9A8405F3FE0A780485714A4B6DD41909C2CF9F83.xkm

**rfakhrai** · Jul 19, 2011, 11:06 PM

Re: Logout fails to complete (improved)

Originally posted by rfakhrai

1) Did you do a clean install of 11.04 or an upgrade?
2) Is your system up-to-date? Run sudo apt-get update && sudo apt-get dist-upgrade in Konsole and reboot.
[b]3) When you get the blank screen with the mouse pointer, are you able to press esc and get any error messages?

Your X log doesn't show any errors that help us. Meanwhile, can you address the other questions emboldened above?

**gytarman** · Jul 20, 2011, 06:45 AM

Re: Logout fails to complete (improved)

1) This was a new, clean install.
2) My system is up-to-date. I did run the commands you directed and this is what I got back;

Code:

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

3) I'll check this and let you know.

**gytarman** · Jul 20, 2011, 06:51 AM

Re: Logout fails to complete (improved)

Once I get the blank screen, other than being able to move the mouse pointer, the computer appears to be completely unresponsive. I've tried esc, ctrl+z, ctrl+x, ctrl+b.

**rfakhrai** · Jul 20, 2011, 09:48 AM

Re: Logout fails to complete (improved)

OK. Sorry to say it but I think you need to file a bug report. I cannot find a problem similar to yours on the net and I'm not seeing any red flags in the information you've provided.

Best of luck.

**PaulW2U** · Jul 20, 2011, 01:17 PM

Re: Logout fails to complete (improved)

Originally posted by Myklawk

Once I get the blank screen, other than being able to move the mouse pointer, the computer appears to be completely unresponsive. I've tried esc, ctrl+z, ctrl+x, ctrl+b.

Myklawk, your problem seems similar to the one that I had, the very problem that brought me to this forum in search of an answer several months ago. I've just removed the fix that I put in, rebooted, logged in/out and I also see a blank screen when logging out. The mouse pointer is movable at first then it freezes. At first I can select a tty with Ctrl-Alt-F1 or similar but after a while that becomes impossible. As I also have an ATI graphics card our problems may be related.

The fix that I found on the net and I think also on this forum too was to edit the file /etc/kd4e/kdm/kdmrc. There is a line that is by default commented out in the [X-:*-Core] section and that is TerminateServer=true. If it is commented out remove the # sign at the beginning of the line. If that line is missing, it can get deleted when you change settings, then add it. Reboot and try logging out. It worked for me and after several weeks of searching I found no other fix.

I have to add that fix everytime I install Kubuntu so I know that this is the fix that fixes my problem and that re-installation will not solve anything.

Hope it works for you.

Announcement

Logout fails to complete (improved)

Logout fails to complete (improved)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment