things that kill KDE

[PattiMichelle]

So far I've identified 3 things that kill KDE - and I am back at the login screen after loosing everything: System Settings - both the Desktop Effects applet and the Application Appearance applet; and (of all things) the Cantor software. Did I somehow get a weird version of KDE installed? Is Compiz doing this?

Here's my sources.list - I don't know how to tell what version of KDE I have installed.
Thank You!!!!!!!!!!!!!!!!!!

deb http://us.archive.ubuntu.com/ubuntu/ maverick main restricted universe
deb-src http://us.archive.ubuntu.com/ubuntu/ maverick main restricted

deb http://us.archive.ubuntu.com/ubuntu/ maverick-updates main restricted universe
deb-src http://us.archive.ubuntu.com/ubuntu/ maverick-updates main restricted

deb http://us.archive.ubuntu.com/ubuntu/ maverick multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ maverick multiverse
deb http://us.archive.ubuntu.com/ubuntu/ maverick-updates multiverse
deb-src http://us.archive.ubuntu.com/ubuntu/ maverick-updates multiverse

deb http://archive.canonical.com/ubuntu/ maverick partner

deb http://extras.ubuntu.com/ubuntu/ maverick main
deb-src http://extras.ubuntu.com/ubuntu/ maverick main

deb http://security.ubuntu.com/ubuntu/ maverick-security main restricted universe
deb-src http://security.ubuntu.com/ubuntu/ maverick-security main restricted
deb http://security.ubuntu.com/ubuntu/ maverick-security multiverse
deb-src http://security.ubuntu.com/ubuntu/ maverick-security multiverse
deb http://archive.canonical.com/ubuntu/ maverick partner
deb-src http://archive.canonical.com/ubuntu/ maverick partner
deb http://archive.canonical.com/ubuntu/ maverick partner (Source)
deb-src http://archive.canonical.com/ubuntu/ maverick partner (Source)

deb http://www.openfoam.com/download/ubuntu/ maverick main

[Mark]

Re: things that kill KDE

Not sure what your question is, but the way to identify your version of KDE, open system settings, click "HELP" at the top, then "About KDE". Should be 4.5.1

[PattiMichelle]

Re: things that kill KDE

Thank you - it says "Platform Version 4.5.5" - would that cause these problems? I just don't want KDE dying unexpectedly all the time and don't know how to troubleshoot.

[rfakhrai]

Re: things that kill KDE

KDE v. 4.5.5 shouldn't cause these types of problems.

We need to know something about your history with Kubuntu:

1) did you upgrade to 10.10 or do a clean install?
2) what's your hardware like? especially video card if you're running compiz
3) how long after starting to use 10.10 did you start experiencing these problems?

[PattiMichelle]

Re: things that kill KDE

Thank you again very much for your time! I'm running on an HP dv7t-4000 laptop (1.6GHz, i7 quad core x 2, 8GB memory) with a dedicated ATI video card. I'm running the repo driver (Radeon Mobility 5000 series from "Additional Drivers"). It was a fresh install of 10.10 as this is my first foray into K/Ubuntu (x64). It is installed alongside Win7x64 and OpenSuSEx64I am also running Compiz, I think (should I disable that and go back to the default)?

It was not too long after starting using 10.10. I think my first problem was trouble installing the Singular backend for Cantor - then I started getting these problems with KDE and someone suggested upgrading to 4.5.5 and running Compiz. I think the problems went away then, but now are back. It seems odd because everything else seems to be running fine. I use this computer heavily for data analysis. It runs Amarok, Mozilla/Firefox, truecrypt, VirtualBox, IDL (ITT's Interactive Data Language) flawlessly.

I'm not against doing a reinstall/rollback type "fix" - but I would like to keep my layout and installed apps if possible. OTOH, if there are some commands I can run to locate errors in the KDE setup, that might be a good way to go. I'm at a loss at how startting apps can kill KDE.

[Teunis]

Re: things that kill KDE

Although I don't have first hand experience with ATI cards they do have the reputation of not so good Linux drivers.
Compiz (or any 3D type desktop) will likely make instability worse so switching it off should give better results.

You might want to upgrade to the 4.6 desktop, although older versions of software are sometimes more reliable a newer version is likely to have the more recent bug fixes.
http://www.kubuntu.org/news/kde-sc-4.6.1

[claydoh]

Re: things that kill KDE

with xorg crashing, I definitely would try going back from compiz to Kwin to see if that helps things. In System Settings the desktop effects section is specifically for Kwin, compiz is not a KDE thing and has its own configuration tool, so attempting to adjust the kwin settings may be problematic if kwin isn't running maybe? Same goes for Application Appearance perhaps. Though it really should not be crashing. I have not used compiz in a long while, so I cannot verify this.

I wonder why someone would suggest compiz over KDE's native Kwin, unless you want many extra effects and their inherent propensity for instability :/, but imo kde 4.6 is quite a bit better all around from kde 4.5 and may be worth the upgrade (though natty 11.04 and 4.6 by default is just around the corner)

Not familiar with cantor or singular, but singular package is rather old version-wise (2008) and (assuming you are getting this from Ubuntu's repos) are not-well-supported automatic conversions from Debian packages. The software itself is from 2008, with minor packaging-related updates since then. it is entirely possible that something is missing or not working properly in *buntu for some reason for that package, though killing xorg is quite serious

[GreyGeek]

Re: things that kill KDE

I use Cantor as a front end to SAGE, which includes Singular and MUCH more, with no problems. But, if I start SAGE from a console and then issue the "notebook()" command, a browser interface similar to Mathematica is started. Very Nice!! Very flexible. One can open multiple notebooks (tabs) at the same time.

[dibl]

Re: things that kill KDE

both the Desktop Effects applet and the Application Appearance applet .....

Is Compiz doing this?

You need to be careful trying to mix 'n match kwin and compiz. If you're using fusion-icon to switch cleanly between them, I think it can work, but I have not done that since 10.04 or earlier. AFAIK, if you want to use compiz, then you need to install the emerald window decorator to use with it.

Personally I have found the KDE 4.4+ desktop effects to be perfectly acceptable for cube switching between desktops, and the like, and have dropped compiz. Compiz does indeed have some fancier eye candy than KDE, but the added complexity and potential conflicts do not seem to be worth it, IMHO.

[PattiMichelle]

Re: things that kill KDE

Although I don't have first hand experience with ATI cards they do have the reputation of not so good Linux drivers.
Compiz (or any 3D type desktop) will likely make instability worse so switching it off should give better results.

You might want to upgrade to the 4.6 desktop, although older versions of software are sometimes more reliable a newer version is likely to have the more recent bug fixes.
http://www.kubuntu.org/news/kde-sc-4.6.1

I don't think it's the ATI card - I've had several that I've used with a few different distros of Linux, and they never had the habit of killing KDE when certain "vanilla" apps (and not others) start up. Usually it's much more devastating behavior.

[PattiMichelle]

Re: things that kill KDE

I guess the way to do this is simply to uninstall Compiz? Also, it was Cantor (from the repo) that is the other app killing KDE...

with xorg crashing, I definitely would try going back from compiz to Kwin to see if that helps things. In System Settings the desktop effects section is specifically for Kwin, compiz is not a KDE thing and has its own configuration tool, so attempting to adjust the kwin settings may be problematic if kwin isn't running maybe? Same goes for Application Appearance perhaps. Though it really should not be crashing. I have not used compiz in a long while, so I cannot verify this.

I wonder why someone would suggest compiz over KDE's native Kwin, unless you want many extra effects and their inherent propensity for instability :/, but imo kde 4.6 is quite a bit better all around from kde 4.5 and may be worth the upgrade (though natty 11.04 and 4.6 by default is just around the corner)

Not familiar with cantor or singular, but singular package is rather old version-wise (2008) and (assuming you are getting this from Ubuntu's repos) are not-well-supported automatic conversions from Debian packages. The software itself is from 2008, with minor packaging-related updates since then. it is entirely possible that something is missing or not working properly in *buntu for some reason for that package, though killing xorg is quite serious

[PattiMichelle]

Re: things that kill KDE

I use Cantor as a front end to SAGE, which includes Singular and MUCH more, with no problems. But, if I start SAGE from a console and then issue the "notebook()" command, a browser interface similar to Mathematica is started. Very Nice!! Very flexible. One can open multiple notebooks (tabs) at the same time.

EXTREMELY cool to hear!!! I found a Singular back-end to Cantor and wanted to use that since I have read that Singular is pretty specifically the best Groebner Basis algorithm. I have a 356-equation Groebner Basis that I need to Solve(), but it crashes Maple (although maple is able to obtain the Groebner basis - it's the equation-solver that fails). Actually it doesn't crash maple, it just uses up all my 8GB of RAM and 8GB of swapfile. So I'm looking for a more robust equation solver...

That's why I'm frustrated with Cantor killing KDE...

[PattiMichelle]

Re: things that kill KDE

both the Desktop Effects applet and the Application Appearance applet .....

Is Compiz doing this?

You need to be careful trying to mix 'n match kwin and compiz. If you're using fusion-icon to switch cleanly between them, I think it can work, but I have not done that since 10.04 or earlier. AFAIK, if you want to use compiz, then you need to install the emerald window decorator to use with it.

Personally I have found the KDE 4.4+ desktop effects to be perfectly acceptable for cube switching between desktops, and the like, and have dropped compiz. Compiz does indeed have some fancier eye candy than KDE, but the added complexity and potential conflicts do not seem to be worth it, IMHO.

OK, I found an app called Compiz Fusion Icon and fired it up. I chose "Use KWin decorator." Hope that fixes...

EDIT: That didn't help, neither did completely removing Compiz from my system.
Any more suggestions anyone?

[dibl]

Re: things that kill KDE

Still waiting to see the output of

lspci -vv

and

lsmod

so we know something about your hardware and drivers.

[PattiMichelle]

Re: things that kill KDE

Sorry, dibl - I missed that request! Wow, what a lot of stuff here. It amazes me that (almost) everything works.

patti@dv7t-Kubuntu64:~$ lspci -vv
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d4000000-d40fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
Subsystem: Device 003c:0049
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4104000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>

00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d410a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d3000000-d3ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2000000-d2ffffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d4109000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 49
Region 0: I/O ports at 5048 [size=8]
Region 1: I/O ports at 5054 [size=4]
Region 2: I/O ports at 5040 [size=8]
Region 3: I/O ports at 5050 [size=4]
Region 4: I/O ports at 5020 [size=32]
Region 5: Memory at d4108000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at d4106000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5000 [size=32]
Kernel modules: i2c-i801

01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d4000000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 4000 [size=256]
Expansion ROM at d4040000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx, radeon

01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 52
Region 0: Memory at d4020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000
Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at d3000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at d1004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at d1000000 (64-bit, prefetchable) [size=16K]
Expansion ROM at d1010000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: i7core_edac

7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

7f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
Subsystem: Hewlett-Packard Company Device 1449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

patti@dv7t-Kubuntu64:~$
patti@dv7t-Kubuntu64:~$ lsmod
Module Size Used by
cryptd 8140 0
aes_x86_64 7936 371
aes_generic 27631 1 aes_x86_64
rfcomm 40787 6
binfmt_misc 7984 1
sco 9986 2
bnep 11985 2
l2cap 42304 16 rfcomm,bnep
vboxnetadp 5764 0
vboxnetflt 19163 0
vboxdrv 1817864 2 vboxnetadp,vboxnetflt
parport_pc 30086 0
ppdev 6804 0
dm_crypt 13381 0
snd_hda_codec_atihdmi 3079 1
snd_hda_codec_idt 64699 1
arc4 1497 2
btusb 12929 2
snd_hda_intel 26147 2
iwlagn 202721 0
snd_seq_midi 5932 0
snd_rawmidi 22207 1 snd_seq_midi
bluetooth 59245 9 rfcomm,sco,bnep,l2cap,btusb
uvcvideo 62379 0
videodev 49359 1 uvcvideo
v4l1_compat 15519 2 uvcvideo,videodev
v4l2_compat_ioctl32 12614 1 videodev
snd_hda_codec 100951 3 snd_hda_codec_atihdmi,snd_hda_codec_idt,snd_hda_in tel
snd_hwdep 6660 1 snd_hda_codec
snd_pcm 89104 2 snd_hda_intel,snd_hda_codec
iwlcore 146875 1 iwlagn
snd_seq_midi_event 7291 1 snd_seq_midi
snd_seq 57512 3 snd_seq_midi,snd_seq_midi_event
mac80211 267099 2 iwlagn,iwlcore
hp_wmi 6467 0
joydev 11395 0
snd_timer 23850 2 snd_pcm,snd_seq
fglrx 2523725 302
snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 64181 14 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_ hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_se q_device
i7core_edac 18122 0
psmouse 62080 0
serio_raw 4910 0
cfg80211 170485 3 iwlagn,iwlcore,mac80211
edac_core 46822 1 i7core_edac
hp_accel 14304 0
lis3lv02d 10384 1 hp_accel
input_polldev 4527 1 lis3lv02d
led_class 3393 1 hp_accel
soundcore 1240 1 snd
snd_page_alloc 8588 2 snd_hda_intel,snd_pcm
lp 10201 0
parport 37032 3 parport_pc,ppdev,lp
usbhid 42030 0
hid 84710 1 usbhid
usb_storage 50436 0
ahci 22210 5
r8169 42254 0
libahci 26148 1 ahci
mii 5261 1 r8169
video 22176 0
output 2527 1 video
patti@dv7t-Kubuntu64:~$