No audio volume

[roadrunner58]

I installed Kubuntu 17.10 on my intel desktop and on my Acer laptop today. I noticed that there is no audio volume and it says "No Output or Input Devices Found" on both computers. The audio volume worked on both computers with Kubuntu 17.04. Does any one else have this problem?

[vinnywright]

no ,,,not @hear , but I did a "do-release-upgrade -d" from a working 17.04

what dose

pactl list sources

show .

and did you check "rite click a blank space in the system tray>click system tray settings>and make sure audio volume is checked.

VINNY

[roadrunner58]

Yes, the audio volume is checked.

[roadrunner58]

If I click on application launcher, multimedia, volume control, I get a message that says: connection to pulse audio failed because pulse_server in the enviroment x11 root window properties or default-server is mis-configured. Then it says that this can also arrise when the pulse server has crashed.

[M@GO LoBEL]

I'm having this problem too. Same messages people above are getting. Apparently Pulseaudio is refusing to load. On the terminal, I can type alsamixer and it recognize my soundcards (integrated, HDMI and a USB Asus Xonar U5).

Typing "pulseaudio" on the terminal gives me this:

clesio@HAL9004:~$ pulseaudio
E: [pulseaudio] module.c: Module "module-switch-on-connect" should be loaded once at most. Refusing to load.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Fail to load daemon.

[GreyGeek]

Have you tried doing a re-install of pulseaudio?


Sent from my iPhone using Tapatalk

[corwin78]

Hi guys, I am lost audio after upgrade from 17.04 to 17.10 as well. In settings is only some Default device.

$ pulseaudio 
W: [pulseaudio] module.c: module-combine is deprecated: Please use module-combine-sink instead of module-combine!
W: [pulseaudio] module-combine.c: We will now load module-combine-sink. Please make sure to remove module-combine from your configuration.
E: [pulseaudio] module.c: Module "module-switch-on-connect" should be loaded once at most. Refusing to load.
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Fail to load daemon.

[stljo]

Same problem after upgrading from 17.04 on Dell XPS13-9343.

In system settings I found that I could not start the hardware detection.

I tried to install every hardware driver for soundcards that looked good via synaptics and installed alsa, without any effect.

hwinfo --sound
09: PCI 03.0: 0403 Audio device
[Created at pci.378]
Unique ID: 3hqH.Vb8yTZ1S3x1
SysFS ID: /devices/pci0000:00/0000:00:03.0
SysFS BusID: 0000:00:03.0
Hardware Class: sound
Model: "Intel Broadwell-U Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x160c "Broadwell-U Audio Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0665
Revision: 0x09
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf741c000-0xf741ffff (rw,non-prefetchable)
IRQ: 50 (657 events)
Module Alias: "pci:v00008086d0000160Csv00001028sd00000665bc04sc0 3i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown

21: PCI 1b.0: 0403 Audio device
[Created at pci.378]
Unique ID: u1Nb.Zacx4cfNPj4
SysFS ID: /devices/pci0000:00/0000:00:1b.0
SysFS BusID: 0000:00:1b.0
Hardware Class: sound
Model: "Intel Wildcat Point-LP High Definition Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x9ca0 "Wildcat Point-LP High Definition Audio Controller"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0665
Revision: 0x03
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf7418000-0xf741bfff (rw,non-prefetchable)
IRQ: 49 (349 events)
Module Alias: "pci:v00008086d00009CA0sv00001028sd00000665bc04sc0 3i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown

but;

pactl list sources
Verbindungsfehler: Verbindung verweigert
pa_context_new() fehlgeschlagen: Verbindung verweigert


Any suggestions?? I'd be thankful.
Update; same pulseaudio output as posted above. Reinstalling it doesn't work.

[acheron]

https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1720519

https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1716092

and have seen another comment that:

Okay, editing /etc/pulse/default.pa and commenting the last 3 lines …

###.ifexists module-switch-on-connect.so …
###load-module module-switch-on-connect …
###.endif

seems to solve the issue.

and

https://bugs.kde.org/show_bug.cgi?id=384997

So uptream bug in pulseaudio if that is correct

[corwin78]

I can confirm, that commenting mentioned lines in /etc/pulse/default.pa fixed problem on my ThinkPad W520.