Announcement

Collapse
No announcement yet.

I want my Ethernet back

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • steve7233
    replied
    Still no Ethernet.
    • Top
    • Bottom

    Leave a comment:

  • steve7233
    replied
    Still trying to get this working. The gateway seems to see it -lights-, but it looks like the driver isn't working correctly. It's loaded according to dmesg. dmesg says it takes a while for enp3s0 (ethernets pci name-, to come up. Maybe the configuration is bad.
    • Top
    • Bottom

    Leave a comment:

  • steve7233
    replied
    Originally posted by oshunluvr View Post
    Seems your missing the driver for the ethernet device.

    http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false
    Code:
    steve7233@steve7233-Not-Specified:~/Downloads/r8101-1.031.02$ sudo ./autorun.sh
[sudo] password for steve7233: 

Check old driver and unload it.
rmmod r8169
Build the module and install
At main.c:158:
- SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175
- SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:178
sign-file: certs/signing_key.pem: No such file or directory
Backup r8169.ko
rename r8169.ko to r8169.bak
DEPMOD 4.10.0-28-generic
load module r8101
Updating initramfs. Please wait.
update-initramfs: Generating /boot/initrd.img-4.10.0-28-generic
Completed.
steve7233@steve7233-Not-Specified:~/Downloads/r8101-1.031.02$
    I will now reboot and see if oshunluvr, nailed it...

    Edit: Not yet.

    Here is the bottom of dmesg:

    Code:
    [   23.066897] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.067288] enp3s0: 0xffffb95680649000, 00:00:00:00:00:00, IRQ 17
[   23.123036] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   23.128731] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   27.204027] r8101: enp3s0: link up
[   27.210321] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   47.137968] Bluetooth: RFCOMM TTY layer initialized
[   47.137980] Bluetooth: RFCOMM socket layer initialized
[   47.137989] Bluetooth: RFCOMM ver 1.11
[  251.582890] perf: interrupt took too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[  310.589772] ERROR @wl_dev_intvar_get : 
[  310.589775] error (-1)
[  310.589780] ERROR @wl_cfg80211_get_tx_power : 
[  310.589781] error (-1)
[  320.157912] perf: interrupt took too long (3181 > 3167), lowering kernel.perf_event_max_sample_rate to 62750
steve7233@steve7233-Not-Specified:~/Downloads/r8101-1.031.02$
    Last edited by steve7233; Jul 26, 2017, 05:05 PM.
    • Top
    • Bottom

    Leave a comment:

  • steve7233
    replied
    Originally posted by GreyGeek View Post
    It's ifconfig not ipconfig.

    Sent from my iPhone using Tapatalk
    ipconfig is a different program. If you read all of it you would see that I installed and ran it.
    • Top
    • Bottom

    Leave a comment:

  • oshunluvr
    replied
    Seems your missing the driver for the ethernet device.

    http://www.realtek.com.tw/DOWNLOADS/...&GetDown=false
    • Top
    • Bottom

    Leave a comment:

  • GreyGeek
    replied
    It's ifconfig not ipconfig.


    Sent from my iPhone using Tapatalk
    • Top
    • Bottom

    Leave a comment:

  • steve7233
    started a topic I want my Ethernet back

    I want my Ethernet back

    Here is some info. Can anyone make sense of this. I just updated and rebooted.

    Code:
    [B]steve7233@steve7233-Not-Specified:~$ lspci[/B]
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
02:00.0 Network controller: Broadcom Limited BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
03:00.0 [COLOR=#ff0000][B]Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 02)[/B][/COLOR]

[B]steve7233@steve7233-Not-Specified:~$ ipconfig enp3s0[/B]
No command 'ipconfig' found, did you mean:
Command 'ifconfig' from package 'net-tools' (main)
Command 'iwconfig' from package 'wireless-tools' (main)
Command 'iconfig' from package 'ipmiutil' (universe)
ipconfig: command not found
steve7233@steve7233-Not-Specified:~$ ifconfig
The program 'ifconfig' is currently not installed. You can install it by typing:
sudo apt install net-tools

[B]steve7233@steve7233-Not-Specified:~$ sudo apt install net-tools[/B]
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
net-tools
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 194 kB of archives.
After this operation, 803 kB of additional disk space will be used.
Get:1 http://us.archive.ubuntu.com/ubuntu zesty/main amd64 net-tools amd64 1.60+git20161116.90da8a0-1ubuntu1 [194 kB]
Fetched 194 kB in 0s (419 kB/s)   
Selecting previously unselected package net-tools.
(Reading database ... 204170 files and directories currently installed.)
Preparing to unpack .../net-tools_1.60+git20161116.90da8a0-1ubuntu1_amd64.deb ...
Unpacking net-tools (1.60+git20161116.90da8a0-1ubuntu1) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up net-tools (1.60+git20161116.90da8a0-1ubuntu1) ...

[B]steve7233@steve7233-Not-Specified:~$ ifconfig[/B]
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
      inet 127.0.0.1  netmask 255.0.0.0
      inet6 ::1  prefixlen 128  scopeid 0x10<host>
      loop  txqueuelen 1000  (Local Loopback)
      RX packets 1549  bytes 107349 (107.3 KB)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 1549  bytes 107349 (107.3 KB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
      inet 10.0.0.3  netmask 255.255.255.0  broadcast 10.0.0.255
      inet6 2601:680:c102:6f0:cad4:6e13:ef79:dd31  prefixlen 64  scopeid 0x0<global>
      inet6 2601:680:c102:6f0:c075:2485:ff7e:4dbf  prefixlen 64  scopeid 0x0<global>
      inet6 fe80::d708:f363:1591:c9d9  prefixlen 64  scopeid 0x20<link>
      ether 00:21:00:c4:4d:fc  txqueuelen 1000  (Ethernet)
      RX packets 6953  bytes 4724060 (4.7 MB)
      RX errors 0  dropped 0  overruns 0  frame 32467
      TX packets 6070  bytes 851829 (851.8 KB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
      device interrupt 16  

[B]steve7233@steve7233-Not-Specified:~$ iwconfig[/B]
enp3s0    no wireless extensions.

wlp2s0    IEEE 802.11  ESSID:"HOME-9BA2"  
        Mode:Managed  Frequency:2.412 GHz  Access Point: F8:ED:A5:6F:9B:A0   
        Retry short limit:7   RTS thr:off   Fragment thr:off
        Power Management:on
        
lo        no wireless extensions.

[B]steve7233@steve7233-Not-Specified:~$ ifconfig enp3s0[/B]
enp3s0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
      ether 00:00:00:00:00:00  txqueuelen 1000  (Ethernet)
      RX packets 0  bytes 0 (0.0 B)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 0  bytes 0 (0.0 B)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[B]steve7233@steve7233-Not-Specified:~$ ifdown enp3s0[/B]
Unknown interface enp3s0
[B]steve7233@steve7233-Not-Specified:~$ ifupenp3s0[/B]
ifupenp3s0: command not found
[B]steve7233@steve7233-Not-Specified:~$ ifup enp3s0[/B]
Unknown interface enp3s0
steve7233@steve7233-Not-Specified:~$
    Last edited by Snowhog; Jul 26, 2017, 07:32 AM.
    Tags: None
    • Top
    • Bottom
Previous template Next

Users Viewing This Topic

Collapse

There are 0 users viewing this topic.

Working...
X