Portable DVD writer no longer works with Kubuntu 13.04

[ironmantis7x]

@SteveRiley: yes I have tried plugging it into a different USB port.
Same difference. I can try another portable drive and see if that makes a difference as well.

ironmantis7x

[SteveRiley]

Hm. Based on the differences between HalationEffect's results and ironmantis7x's results, it appears that the USB subsystem on inronmantis7x's computer isn't recognizing the drive.

@ironmantis7x: have you tried plugging the drive into a different USB port?

[HalationEffect]

Mar 28 10:29:20 H61M-S2PV kernel: [469108.328543] usb 1-1.2.2: new high-speed USB device number 7 using ehci_hcd
Mar 28 10:29:21 H61M-S2PV kernel: [469108.428096] scsi7 : usb-storage 1-1.2.2:1.0
Mar 28 10:29:21 H61M-S2PV mtp-probe: checking bus 1, device 7: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2"
Mar 28 10:29:21 H61M-S2PV mtp-probe: bus: 1, device: 7 was not an MTP device
Mar 28 10:29:22 H61M-S2PV kernel: [469109.434063] scsi 7:0:0:0: CD-ROM            slimtype  eTDU108   1     SL46 PQ: 0 ANSI: 0
Mar 28 10:29:22 H61M-S2PV kernel: [469109.491459] sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda pop-up
Mar 28 10:29:22 H61M-S2PV kernel: [469109.491611] sr 7:0:0:0: Attached scsi CD-ROM sr1
Mar 28 10:29:22 H61M-S2PV kernel: [469109.493539] sr 7:0:0:0: Attached scsi generic sg4 type 5

That's what I see appear at the end of /var/log/syslog when I connect my son's Lite-On USB DVD reader.

(Edit) Note: No disc was in the drive when it was connected. Also my PC is running Precise rather than Raring, but I doubt that makes much difference to this.

[SteveRiley]

I dunno...that looks pretty small. I don't have a portable DVD to test with; however, when I insert a USB stick, this is what appears in my syslog:

Mar 27 19:58:10 t520 kernel: [ 1934.470186] userif-3: sent link up event.<6>[ 4172.249522] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
Mar 27 19:58:11 t520 kernel: [ 4172.344247] usb 1-1.1: New USB device found, idVendor=0781, idProduct=5151
Mar 27 19:58:11 t520 kernel: [ 4172.344258] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar 27 19:58:11 t520 kernel: [ 4172.344264] usb 1-1.1: Product: Cruzer Micro
Mar 27 19:58:11 t520 kernel: [ 4172.344269] usb 1-1.1: Manufacturer: SanDisk Corporation
Mar 27 19:58:11 t520 kernel: [ 4172.344273] usb 1-1.1: SerialNumber: SNDKAA9FB4170C908902
Mar 27 19:58:11 t520 mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1"
Mar 27 19:58:11 t520 mtp-probe: bus: 1, device: 5 was not an MTP device
Mar 27 19:58:11 t520 kernel: [ 4172.389009] Initializing USB Mass Storage driver...
Mar 27 19:58:11 t520 kernel: [ 4172.390076] scsi6 : usb-storage 1-1.1:1.0
Mar 27 19:58:11 t520 kernel: [ 4172.390310] usbcore: registered new interface driver usb-storage
Mar 27 19:58:11 t520 kernel: [ 4172.390318] USB Mass Storage support registered.
Mar 27 19:58:12 t520 kernel: [ 4173.389239] scsi 6:0:0:0: Direct-Access     SanDisk  Cruzer Micro     0.2  PQ: 0 ANSI: 2
Mar 27 19:58:12 t520 kernel: [ 4173.391015] sd 6:0:0:0: Attached scsi generic sg2 type 0
Mar 27 19:58:12 t520 kernel: [ 4173.392312] sd 6:0:0:0: [sdb] 1000944 512-byte logical blocks: (512 MB/488 MiB)
Mar 27 19:58:12 t520 kernel: [ 4173.393646] sd 6:0:0:0: [sdb] Write Protect is off
Mar 27 19:58:12 t520 kernel: [ 4173.393660] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Mar 27 19:58:12 t520 kernel: [ 4173.395021] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 27 19:58:12 t520 kernel: [ 4173.395034] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 27 19:58:12 t520 kernel: [ 4173.401270] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 27 19:58:12 t520 kernel: [ 4173.401273] sd 6:0:0:0: [sdb] Assuming drive cache: write through    
Mar 27 19:58:12 t520 kernel: [ 4173.403031]  sdb: sdb1 sdb2
Mar 27 19:58:12 t520 kernel: [ 4173.407708] sd 6:0:0:0: [sdb] No Caching mode page present
Mar 27 19:58:12 t520 kernel: [ 4173.407719] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Mar 27 19:58:12 t520 kernel: [ 4173.407726] sd 6:0:0:0: [sdb] Attached SCSI removable disk
- - -
Mar 27 19:58:26 t520 kernel: [ 4188.157070] usb 1-1.1: USB disconnect, device number 5

And here's the output from udevadm monitor --property: http://paste.ubuntu.com/5654112/

As you can see, there's a whole lot more. Does anyone here on the forum have a portable DVD they can try this experiment with?

[ironmantis7x]

Here is the output from syslog when I plugged in my portable DVD:

Mar 27 07:13:21 ironscribe5 kernel: [  273.898016] sr 8:0:0:0: Attached scsi CD-ROM sr0
Mar 27 07:13:21 ironscribe5 kernel: [  273.898210] sr 8:0:0:0: Attached scsi generic sg1 type 5

Here is the output from ud evadm monitor --property > dvdtest.txt attached:

ID_VENDOR_ID=0e8d
MAJOR=11
MINOR=0
SEQNUM=2341
SUBSYSTEM=block
TAGS=:udev-acl:
UDEV_LOG=3
UDISKS_PRESENTATION_NOPOLICY=0
USEC_INITIALIZED=408814301

SO it looks like the machine IS detecting the portable DVD. Maybe I just have bad media... I will investigate.

thanks!!

ironmantis7x

[ironmantis7x]

Let's check a couple things.

First, open a console and run

tail -f /var/log/syslog

This displays the most recent 10 lines from syslog and the waits. Now plug in your DVD writer, and then unplug it. Do you see some lines appear? If so, copy and paste those here.

Second, while still in the console, run

udevadm monitor --property > dvdtest.txt

The cursor will move to the next line but nothing will be displayed. Plug in your DVD writer. Wait a few seconds. Unplug the DVD writer. Wait a few more seconds. Now press Ctrl+C. Reply here and attach the file dvdtest.txt.

(For the CLI junkies here, I tried the above with udevadm monitor --property | tee dvdtest.txt, so that the output is displayed on the screen and simultaneously captured to a file, but there were some weird timing issues that caused some lines to be missed. The unbuffer utility would fix this, but that requires installing the expect-dev package.)

I will do this as soon as I get home where my kubuntu laptop and DVD player are.

Thanks guys!!

ironmantis7x

[SteveRiley]

Let's check a couple things.

First, open a console and run

tail -f /var/log/syslog

This displays the most recent 10 lines from syslog and the waits. Now plug in your DVD writer, and then unplug it. Do you see some lines appear? If so, copy and paste those here.

Second, while still in the console, run

udevadm monitor --property > dvdtest.txt

The cursor will move to the next line but nothing will be displayed. Plug in your DVD writer. Wait a few seconds. Unplug the DVD writer. Wait a few more seconds. Now press Ctrl+C. Reply here and attach the file dvdtest.txt.

(For the CLI junkies here, I tried the above with udevadm monitor --property | tee dvdtest.txt, so that the output is displayed on the screen and simultaneously captured to a file, but there were some weird timing issues that caused some lines to be missed. The unbuffer utility would fix this, but that requires installing the expect-dev package.)

[ironmantis7x]

Yes -- I tried the drive on another machine running kubuntu 12.10 and another USB cable. The drive works on the machine with kubuntu 12.10.
Also -- the drive is brand new out of the box as well.

ironmantis7x

[HalationEffect]

Have you ruled out hardware failure?* Just in case the fact that you've recently upgraded to 13.04b is coincidental to the problem. Even though it may be unlikely, it's how I was taught to trouble-shoot.

(* Tried a different USB cable to rule out cable failure, tried the drive on a different USB port to rule out a faulty port, and tried the drive on a different computer to rule out the drive being faulty.)

[ironmantis7x]

I upgraded from 12.10 to 13.04 Beta.
My LG External DVD writer is no longer recognized by the system.
I am on an Asus Ultra book (Zen Book Prime Touch) .

What info do you need off my system to diagnose this problem?

ironmantis7x