Can't make a connection on a ZTE mf636 [solved]

This topic is closed.

Guest

Send PM

Can't make a connection on a ZTE mf636 [solved]

Feb 04, 2011, 03:53 PM

Hello.
I've got a problem with the wireless pen mf636 ZTE.
I have an Asus EeePC 1008HA
For a while I used the Ubuntu Netbook Remix and the ZTE worked fine without having to make any changes to anything ...
I tried Kubuntu and I prefer this OS.
My problem is the ZTE does not work ...
The kubuntu detects the pen after a few seconds but dosen't connect.

Some information:

Code:

uname -a
Linux EeePc 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux

Code:

lsusb
Bus 005 Device 002: ID 0b05:b700 ASUSTek Computer, Inc. Broadcom Bluetooth 2.1
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF110/MF636
Bus 001 Device 004: ID 13d3:5095 IMC Networks 
Bus 001 Device 002: ID 04f9:002b Brother Industries, Ltd HL-5250DN Printer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code:

dmesg | grep usb
[  0.293064] usbcore: registered new interface driver usbfs
[  0.293113] usbcore: registered new interface driver hub
[  0.293214] usbcore: registered new device driver usb
[  0.908091] usb 1-1: new high speed USB device using ehci_hcd and address 2
[  1.324094] usb 1-8: new high speed USB device using ehci_hcd and address 5
[  1.342414] scsi4 : usb-storage 1-1:1.2
[  1.342712] usbcore: registered new interface driver usb-storage
[  1.777122] usb 2-2: new low speed USB device using uhci_hcd and address 2
[  1.988464] usbcore: registered new interface driver hiddev
[  2.002327] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[  2.002809] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-2/input0
[  2.003121] usbcore: registered new interface driver usbhid
[  2.003131] usbhid: USB HID core driver
[  2.196143] usb 5-1: new full speed USB device using uhci_hcd and address 2
[  9.495289] usbcore: registered new interface driver usbserial
[  9.498786] usbcore: registered new interface driver usbserial_generic
[  9.498798] usbserial: USB Serial Driver core
[  9.886130] usbcore: registered new interface driver btusb
[  9.945513] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7
[  9.945739] usbcore: registered new interface driver uvcvideo
[  10.261826] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[  10.262608] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[  10.263457] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[  10.274391] usbcore: registered new interface driver option
[ 153.752188] usb 1-1: USB disconnect, address 2
[ 163.580084] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 163.733331] scsi5 : usb-storage 1-1:1.0
[ 166.802927] usb 1-1: USB disconnect, address 6
[ 171.588177] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 171.729622] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 171.730655] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 171.731245] scsi6 : usb-storage 1-1:1.2
[ 171.732347] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 172.932232] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 173.932330] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 174.932289] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110

Code:

lsusb -v | grep -i vendor

 idVendor      0x0b05 ASUSTek Computer, Inc.
   bInterfaceClass    255 Vendor Specific Class
   bInterfaceSubClass  255 Vendor Specific Subclass
   bInterfaceProtocol  255 Vendor Specific Protocol
 idVendor      0x1d6b Linux Foundation
 idVendor      0x1d6b Linux Foundation
 idVendor      0x1d6b Linux Foundation
 idVendor      0x1d6b Linux Foundation
 idVendor      0x19d2 ONDA Communication S.p.A.
   bInterfaceClass    255 Vendor Specific Class
   bInterfaceSubClass  255 Vendor Specific Subclass
   bInterfaceProtocol  255 Vendor Specific Protocol
   bInterfaceClass    255 Vendor Specific Class
   bInterfaceSubClass  255 Vendor Specific Subclass
   bInterfaceProtocol  255 Vendor Specific Protocol
   bInterfaceClass    255 Vendor Specific Class
   bInterfaceSubClass  255 Vendor Specific Subclass
   bInterfaceProtocol  255 Vendor Specific Protocol
 idVendor      0x13d3 IMC Networks
 idVendor      0x04f9 Brother Industries, Ltd
 idVendor      0x1d6b Linux Foundation

Code:

lsusb -v | grep -i product
 idProduct     0xb700 Broadcom Bluetooth 2.1
 iProduct        2 BT-253
 idProduct     0x0001 1.1 root hub
 iProduct        2 UHCI Host Controller
 idProduct     0x0001 1.1 root hub
 iProduct        2 UHCI Host Controller
 idProduct     0x0001 1.1 root hub
 iProduct        2 UHCI Host Controller
 idProduct     0x0001 1.1 root hub
 iProduct        2 UHCI Host Controller
 idProduct     0x0031 ZTE MF110/MF636
 iProduct        2 ZTE CDMA Technologies MSM
 idProduct     0x5095 
 iProduct        3 USB2.0 UVC 1.3M WebCam
 idProduct     0x002b HL-5250DN Printer
 iProduct        2 HL-5250DN
 idProduct     0x0002 2.0 root hub
 iProduct        2 EHCI Host Controller

Code:

dmesg | tail
[ 132.568659] option 1-1:1.3: GSM modem (1-port) converter detected
[ 132.569636] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 132.570616] usbcore: registered new interface driver option
[ 132.570626] option: v0.7.2:USB Driver for GSM modems
[ 133.872356] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 134.872313] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 135.872234] usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -110
[ 137.726672] scsi 5:0:0:0: Direct-Access   ZTE   MMC Storage   2.31 PQ: 0 ANSI: 2
[ 137.728931] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 137.739426] sd 5:0:0:0: [sdb] Attached SCSI removable disk

I tried this:

Code:

sudo gedit /etc/usb_modeswitch.conf

########################################################
# ZTE MF636
#

DefaultVendor= 0x19d2
DefaultProduct= 0x2000

TargetVendor=  0x19d2
TargetProduct= 0x0031

MessageEndpoint=0x01
MessageContent="55534243123456782000000080000c85010101180101010101000000000000"

Code:

/etc/udev/rules.d/15-zte-mf636.rules

ACTION!="add", GOTO="ZTE_End"
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000",
SYSFS{idVendor}=="19d2", GOTO="ZTE_ZeroCD"
LABEL="ZTE_ZeroCD"
RUN+="/usr/sbin/usb_modeswitch"
LABEL="ZTE_End"

But nothing..
Detects the Mobile Broadband but dosen't connect..

I have erased the last part and tried wicd
but wicd don't detects the pen too...

Any Help?

Thanks in advance..

Tags: None

Guest

Send PM
#2

Feb 05, 2011, 12:04 AM

Re: Can't make a connection on a ZTE mf636

Problem solved..
I erased what i had done before and then i installed 4 packages:
libuniconf4.6
libwvstreams4.6-base
libwvstremas4.6-extras
wvdial1.61-2
Then i created a new Mobile Broaband and works fine know.
Top

Bottom
Comment

Previous template Next

Announcement

Can't make a connection on a ZTE mf636 [solved]

Can't make a connection on a ZTE mf636 [solved]

Comment