Announcement

Collapse
No announcement yet.

Cannot Set Up Samba Following Tutorial?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cannot Set Up Samba Following Tutorial?

    I'm following this tutorial:
    https://www.linuxbabe.com/ubuntu/ins...r-ubuntu-16-04

    and cannot seem to get the Samba share to appear in Dolphin.

    Here are the relevant parts of my smb.conf file (From testparm):
    Code:
    root@scilab_comp_0:~# testparm 
    Load smb config files from /etc/samba/smb.conf
    rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
    WARNING: The "syslog" option is deprecated
    Processing section "[Anonymous]"
    Processing section "[printers]"
    Processing section "[print$]"
    Loaded services file OK.
    Server role: ROLE_STANDALONE
    
    Press enter to see a dump of your service definitions
    
    # Global parameters
    [global]
         dns proxy = No
         log file = /var/log/samba/log.%m
         map to guest = Bad User
         max log size = 1000
         netbios name = SCILAB_0
         obey pam restrictions = Yes
         pam password change = Yes
         panic action = /usr/share/samba/panic-action %d
         passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
         passwd program = /usr/bin/passwd %u
         security = USER
         server role = standalone server
         server string = %h server (Samba, Ubuntu)
         syslog = 0
         unix password sync = Yes
         usershare allow guests = Yes
         workgroup = SCILAB
         idmap config * : backend = tdb
         guest ok = Yes
         hosts allow = 192.168.1.
         hosts deny = ALL
    
    [Anonymous]
         comment = Scilab File Server
         create mask = 0755
         path = /Data/Shared
         read only = No
    And the filesystem:
    Code:
    root@scilab_comp_0:~# ls -l /Data/Shared/
    total 0
    drwsrwsr-x+ 1 root sambashare   0 Dec 15 04:46 Alexander
    drwsrwsr-x+ 1 root sambashare   0 Dec 15 04:46 Mama
    drwsrwsr-x+ 1 root sambashare 140 Dec 14 04:35 MediaServer


    Alternative:

    I also tried using this minimalistic configuration file:
    [global]
    map to guest = Bad User
    security = USER
    idmap config * : backend = tdb
    guest ok = Yes

    [public]
    comment = public share, no need to enter username and password
    path = /Data/Share
    read only = No

    The folder I'm trying to share is called /Data which has several folders inside of it.
    I already ran: sudo setfacl -R -m "u:nobody:rwx" /
    and restarted the services, but nothing appears in the Dolphin's network section under SMB.

    Neither the server, nor my computer have ufw enabled.

    How can I resolve this?

    Full File:
    Code:
    #
    # Sample configuration file for the Samba suite for Debian GNU/Linux.
    #
    #
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options most of which 
    # are not shown in this example
    #
    # Some options that are often worth tuning have been included as
    # commented-out examples in this file.
    #  - When such options are commented with ";", the proposed setting
    #    differs from the default Samba behaviour
    #  - When commented with "#", the proposed setting is the default
    #    behaviour of Samba but the option is considered important
    #    enough to be mentioned here
    #
    # NOTE: Whenever you modify this file you should run the command
    # "testparm" to check that you have not made any basic syntactic 
    # errors. 
    
    #======================= Global Settings =======================
    
    [global]
    security=user
    hosts allow = 192.168.1.
    hosts deny = ALL
    netbios name = SCILAB_0
    guest ok = yes
    ## Browsing/Identification ###
    
    # Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = SCILAB
    
    # server string is the equivalent of the NT Description field
     server string = %h server (Samba, Ubuntu)
    
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable its WINS Server
    #   wins support = no
    
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ;   wins server = w.x.y.z
    
    # This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no
    
    #### Networking ####
    
    # The specific set of interfaces / networks to bind to
    # This can be either the interface name or an IP address/netmask;
    # interface names are normally preferred
    ;   interfaces = 127.0.0.0/8 eth0
    
    # Only bind to the named interfaces and/or networks; you must use the
    # 'interfaces' option above to use this.
    # It is recommended that you enable this feature if your Samba machine is
    # not protected by a firewall or is a firewall itself. However, this
    # option cannot handle dynamic or non-broadcast interfaces correctly.
    ;   bind interfaces only = yes
    
    #### Debugging/Accounting ####
    
    # This tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/log.%m
    
    # Cap the size of the individual log files (in KiB).
    max log size = 1000
    
    # If you want Samba to only log through syslog then set the following
    # parameter to 'yes'.
    #   syslog only = no
    
    # We want Samba to log a minimum amount of information to syslog. Everything
    # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
    # through syslog you should set the following parameter to something higher.
    syslog = 0
    
    # Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d
    
    ####### Authentication #######
    
    # Server role. Defines in which mode Samba will operate. Possible
    # values are "standalone server", "member server", "classic primary
    # domain controller", "classic backup domain controller", "active
    # directory domain controller". 
    #
    # Most people will want "standalone sever" or "member server".
    # Running as "active directory domain controller" will require first
    # running "samba-tool domain provision" to wipe databases and create a
    # new domain.
    server role = standalone server
    
    # If you are using encrypted passwords, Samba will need to know what
    # password database type you are using.  
    passdb backend = tdbsam
    
    obey pam restrictions = yes
    
    # This boolean parameter controls whether Samba attempts to sync the Unix
    # password with the SMB password when the encrypted SMB password in the
    # passdb is changed.
    unix password sync = yes
    
    # For Unix password sync to work on a Debian GNU/Linux system, the following
    # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
    # sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
    
    # This boolean controls whether PAM will be used for password changes
    # when requested by an SMB client instead of the program listed in
    # 'passwd program'. The default is 'no'.
    pam password change = yes
    
    # This option controls how unsuccessful authentication attempts are mapped
    # to anonymous connections
    map to guest = bad user
    
    ########## Domains ###########
    
    #
    # The following settings only takes effect if 'server role = primary
    # classic domain controller', 'server role = backup domain controller'
    # or 'domain logons' is set 
    #
    
    # It specifies the location of the user's
    # profile directory from the client point of view) The following
    # required a [profiles] share to be setup on the samba server (see
    # below)
    ;   logon path = \\%N\profiles\%U
    # Another common choice is storing the profile in the user's home directory
    # (this is Samba's default)
    #   logon path = \\%N\%U\profile
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the location of a user's home directory (from the client
    # point of view)
    ;   logon drive = H:
    #   logon home = \\%N\%U
    
    # The following setting only takes effect if 'domain logons' is set
    # It specifies the script to run during logon. The script must be stored
    # in the [netlogon] share
    # NOTE: Must be store in 'DOS' file format convention
    ;   logon script = logon.cmd
    
    # This allows Unix users to be created on the domain controller via the SAMR
    # RPC pipe. The example command creates a user account with a disabled Unix
    # password; please adapt to your needs
    ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
    
    # This allows machine accounts to be created on the domain controller via the 
    # SAMR RPC pipe.  
    # The following assumes a "machines" group exists on the system
    ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
    
    # This allows Unix groups to be created on the domain controller via the SAMR
    # RPC pipe.  
    ; add group script = /usr/sbin/addgroup --force-badname %g
    
    ############ Misc ############
    
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting
    ;   include = /home/samba/etc/smb.conf.%m
    
    # Some defaults for winbind (make sure you're not using the ranges
    # for something else.)
    ;   idmap uid = 10000-20000
    ;   idmap gid = 10000-20000
    ;   template shell = /bin/bash
    
    # Setup usershare options to enable non-root users to share folders
    # with the net usershare command.
    
    # Maximum number of usershare. 0 (default) means that usershare is disabled.
    ;   usershare max shares = 100
    
    # Allow users who've been granted usershare privileges to create
    # public shares, not just authenticated ones
    usershare allow guests = yes
    
    #======================= Share Definitions =======================
    
    # Un-comment the following (and tweak the other settings below to suit)
    # to enable the default home directory shares. This will share each
    # user's home directory as \\server\username
    ;[homes]
    ;   comment = Home Directories
    ;   browseable = no
    
    # By default, the home directories are exported read-only. Change the
    # next parameter to 'no' if you want to be able to write to them.
    ;   read only = yes
    
    # File creation mask is set to 0700 for security reasons. If you want to
    # create files with group=rw permissions, set next parameter to 0775.
    ;   create mask = 0700
    
    # Directory creation mask is set to 0700 for security reasons. If you want to
    # create dirs. with group=rw permissions, set next parameter to 0775.
    ;   directory mask = 0700
    
    # By default, \\server\username shares can be connected to by anyone
    # with access to the samba server.
    # Un-comment the following parameter to make sure that only "username"
    # can connect to \\server\username
    # This might need tweaking when using external authentication schemes
    ;   valid users = %S
    
    # Un-comment the following and create the netlogon directory for Domain Logons
    # (you need to configure Samba to act as a domain controller too.)
    ;[netlogon]
    ;   comment = Network Logon Service
    ;   path = /home/samba/netlogon
    ;   guest ok = yes
    ;   read only = yes
    
    # Un-comment the following and create the profiles directory to store
    # users profiles (see the "logon path" option above)
    # (you need to configure Samba to act as a domain controller too.)
    # The path below should be writable by all users so that their
    # profile directory may be created the first time they log on
    ;[profiles]
    ;   comment = Users profiles
    ;   path = /home/samba/profiles
    ;   guest ok = no
    ;   browseable = no
    ;   create mask = 0600
    ;   directory mask = 0700
    [Anonymous]
     comment = Scilab File Server
     path = /Data/Shared
     browsable = yes
     writable = yes
     guest ok = yes
     read only = no
     #force user = nobody
     create mask = 0755
    [printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
    guest ok = no
    read only = yes
    create mask = 0700
    
    # Windows clients look for this share name as a source of downloadable
    # printer drivers
    [print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
    browseable = yes
    read only = yes
    guest ok = no
    # Uncomment to allow remote administration of Windows print drivers.
    # You may need to replace 'lpadmin' with the name of the group your
    # admin users are members of.
    # Please note that you also need to set appropriate Unix permissions
    # to the drivers directory for these users to have write rights in it
    ;   write list = root, @lpadmin
    Last edited by PhysicistSarah; Dec 15, 2019, 12:02 AM.

    #2
    I followed this guide to get mine working whwn I had a windows computer to share to. It worked perfect. His download link 404's but I have the samples if you want them

    https://www.youtube.com/watch?v=dm0_9N3dY90

    Comment

    Working...
    X