Announcement

Collapse
No announcement yet.

printer

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Thank you GreyGeek. You helped me to overcome this problem. In both drivers, there are two ways to choose b&w or color and one way doesn't work on the contrary to the other one.
    My parents are like you. They have had a color printer; but sometimes I need to print comics and with colors it's better :-)
    Still, I miss the ability to print different parts of a document in one go as I wrote recently.

    Comment


      #17
      Originally posted by jlittle View Post
      That sounds like a "starter" ink cartridge that came with the printer. The expensive cartridges you buy will have much more ink.

      I presume they do this because printer companies sell consumer printers for a small amount, basically just enough to pay the retailers for stocking them, then cream it on expensive cartridges. If the printers had full cartridges, it would be cheaper to buy a new printer just to get the cartridges. I don't blame them for this essentially deceptive practice, consumers are over-sensitive to headline prices.

      It makes more sense to get an "office" printer, where one pays a realistic price for the printer, and the cartridges are more reasonable. When I bought my HP our local consumer organization had tested a bunch and the "OfficeJet" worked out cheaper per page in less than 2 years with only moderate use. However, the HP cartridge prices have crept up since then, from $NZ 20 to $NZ 30.
      My HP inkjet did come with a starter cartridge but I replaced it with a full $58 color & bw cartridge and that is the one completely exhausted trying to print ONE decent color photo of my grandson and I. Now, if I want a color print I take a jpg to Walmart, and for other printing I sent it to my HP LaserJet P1606dn duplex BW printer, which I've used for about 8 years. It has worked faultlessly, and each toner gives about 3,000 pages.

      Glad to hear you got your printer problem sorted out!
      "A nation that is afraid to let its people judge the truth and falsehood in an open market is a nation that is afraid of its people.”
      – John F. Kennedy, February 26, 1962.

      Comment


        #18
        Hello everyone,
        I'm sorry, I've been thinking that the printer was correctly installed, but I still cannot choose from which tray it will print. I have a Samsung clp-550 N, I installed the drivers
        - clp 550 N Footmatic/postscript (recommanded),
        - clp 550 N Footmatic/pxlcolor,
        - clp 550 Footmatic/postscript (recommended) and
        - clp 550 Footmatic/pxlcolor.
        Only with the pxlcolor drivers I can choose the tray, but it is useless. It doesn't print as I specified. I can also choose the tray in the system (printer configuration) but it is also useless. It doesn't remember about it and it prints only from the upper tray.

        I would be very happy to be helped :-)

        Comment


          #19
          According to Open Printing, that printer works perfectly using the Postscript PPD generated here. And here it is:


          Samsung-CLP-550N-Postscript.ppd
          Code:
          *PPD-Adobe: "4.3"*%
          *% For information on using this, and to obtain the required backend
          *% script, consult http://www.openprinting.org/
          *%
          *% This file is published under the GNU General Public License
          *%
          *% PPD-O-MATIC (4.0.0 or newer) generated this PPD file. It is for use with 
          *% all programs and environments which use PPD files for dealing with
          *% printer capability information. The printer must be configured with the
          *% "foomatic-rip" backend filter script of Foomatic 4.0.0 or newer. This 
          *% file and "foomatic-rip" work together to support PPD-controlled printer
          *% driver option access with all supported printer drivers and printing
          *% spoolers.
          *%
          *% To save this file on your disk, wait until the download has completed
          *% (the animation of the browser logo must stop) and then use the
          *% "Save as..." command in the "File" menu of your browser or in the 
          *% pop-up manu when you click on this document with the right mouse button.
          *% DO NOT cut and paste this file into an editor with your mouse. This can
          *% introduce additional line breaks which lead to unexpected results.
          *%
          *% You may save this file as 'Samsung-CLP-550N-Postscript.ppd'
          *%
          *%
          *FormatVersion:    "4.3"
          *FileVersion:    "1.1"
          *LanguageVersion: English 
          *LanguageEncoding: ISOLatin1
          *PCFileName:    "POSTSCRI.PPD"
          *Manufacturer:    "Samsung"
          *Product:    "(CLP-550N)"
          *cupsVersion:    1.0
          *cupsManualCopies: True
          *cupsModelNumber:  2
          *cupsFilter:    "application/vnd.cups-postscript 100 foomatic-rip"
          *cupsFilter:    "application/vnd.cups-pdf 0 foomatic-rip"
          *%pprRIP:        foomatic-rip other
          *ModelName:     "Samsung CLP-550N"
          *ShortNickName: "Samsung CLP-550N Postscript"
          *NickName:      "Samsung CLP-550N Foomatic/Postscript (recommended)"
          *PSVersion:    "(3010.000) 550"
          *PSVersion:    "(3010.000) 651"
          *PSVersion:    "(3010.000) 652"
          *PSVersion:    "(3010.000) 653"
          *PSVersion:    "(3010.000) 704"
          *PSVersion:    "(3010.000) 705"
          *PSVersion:    "(3010.000) 800"
          *PSVersion:    "(3010.000) 815"
          *PSVersion:    "(3010.000) 850"
          *PSVersion:    "(3010.000) 860"
          *PSVersion:    "(3010.000) 861"
          *PSVersion:    "(3010.000) 862"
          *PSVersion:    "(3010.000) 863"
          *PSVersion:    "(3010.000) 864"
          *PSVersion:    "(3010.000) 870"
          *LanguageLevel:    "3"
          *ColorDevice:    True
          *DefaultColorSpace: RGB
          *FileSystem:    False
          *Throughput:    "1"
          *LandscapeOrientation: Plus90
          *TTRasterizer:    Type42
          *1284DeviceID: "DRV:DPostscript,R1,M0,F1,P0,TP;"
          
          
          *driverName Postscript: ""
          *driverType P/PostScript: ""
          *driverUrl: "http://partners.adobe.com/public/developer/ps/index_specs.html"
          *driverObsolete: False
          *driverManufacturerSupplied: False
          *driverFreeSoftware: True
          
          
          
          
          
          
          
          
          *HWMargins: 18 36 18 36
          *VariablePaperSize: True
          *MaxMediaWidth: 100000
          *MaxMediaHeight: 100000
          *NonUIOrderDependency: 100 AnySetup *CustomPageSize
          *CustomPageSize True: "pop pop pop
          <</PageSize [ 5 -2 roll ] /ImagingBBox null>>setpagedevice"
          *End
          *ParamCustomPageSize Width: 1 points 36 100000
          *ParamCustomPageSize Height: 2 points 36 100000
          *ParamCustomPageSize Orientation: 3 int 0 0
          *ParamCustomPageSize WidthOffset: 4 points 0 0
          *ParamCustomPageSize HeightOffset: 5 points 0 0
          
          
          *FoomaticIDs: Samsung-CLP-550N Postscript
          *FoomaticRIPCommandLine: "cat%A%B%Z"
          *FoomaticRIPNoPageAccounting: True
          
          
          *OpenGroup: General/General
          
          
          *OpenUI *PageSize/Page Size: PickOne
          *OrderDependency: 100 AnySetup *PageSize
          *DefaultPageSize: Letter
          *PageSize Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
          *PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
          *PageSize 11x17/11x17: "<</PageSize[792 1224]/ImagingBBox null>>setpagedevice"
          *PageSize A3/A3: "<</PageSize[842 1191]/ImagingBBox null>>setpagedevice"
          *PageSize A5/A5: "<</PageSize[421 595]/ImagingBBox null>>setpagedevice"
          *PageSize B5/B5 (JIS): "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
          *PageSize Env10/Envelope #10: "<</PageSize[297 684]/ImagingBBox null>>setpagedevice"
          *PageSize EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
          *PageSize EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
          *PageSize EnvISOB5/Envelope B5: "<</PageSize[499 709]/ImagingBBox null>>setpagedevice"
          *PageSize EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
          *PageSize Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
          *PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
          *CloseUI: *PageSize
          
          
          *OpenUI *PageRegion: PickOne
          *OrderDependency: 100 AnySetup *PageRegion
          *DefaultPageRegion: Letter
          *PageRegion Letter/US Letter: "<</PageSize[612 792]/ImagingBBox null>>setpagedevice"
          *PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
          *PageRegion 11x17/11x17: "<</PageSize[792 1224]/ImagingBBox null>>setpagedevice"
          *PageRegion A3/A3: "<</PageSize[842 1191]/ImagingBBox null>>setpagedevice"
          *PageRegion A5/A5: "<</PageSize[421 595]/ImagingBBox null>>setpagedevice"
          *PageRegion B5/B5 (JIS): "<</PageSize[516 729]/ImagingBBox null>>setpagedevice"
          *PageRegion Env10/Envelope #10: "<</PageSize[297 684]/ImagingBBox null>>setpagedevice"
          *PageRegion EnvC5/Envelope C5: "<</PageSize[459 649]/ImagingBBox null>>setpagedevice"
          *PageRegion EnvDL/Envelope DL: "<</PageSize[312 624]/ImagingBBox null>>setpagedevice"
          *PageRegion EnvISOB5/Envelope B5: "<</PageSize[499 709]/ImagingBBox null>>setpagedevice"
          *PageRegion EnvMonarch/Envelope Monarch: "<</PageSize[279 540]/ImagingBBox null>>setpagedevice"
          *PageRegion Executive/Executive: "<</PageSize[522 756]/ImagingBBox null>>setpagedevice"
          *PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
          *CloseUI: *PageRegion
          
          
          *DefaultImageableArea: Letter
          *ImageableArea Letter/US Letter: "18 36 594 756"
          *ImageableArea A4/A4: "18 36 577 806"
          *ImageableArea 11x17/11x17: "18 36 774 1188"
          *ImageableArea A3/A3: "18 36 824 1155"
          *ImageableArea A5/A5: "18 36 403 559"
          *ImageableArea B5/B5 (JIS): "18 36 498 693"
          *ImageableArea Env10/Envelope #10: "18 36 279 648"
          *ImageableArea EnvC5/Envelope C5: "18 36 441 613"
          *ImageableArea EnvDL/Envelope DL: "18 36 294 588"
          *ImageableArea EnvISOB5/Envelope B5: "18 36 481 673"
          *ImageableArea EnvMonarch/Envelope Monarch: "18 36 261 504"
          *ImageableArea Executive/Executive: "18 36 504 720"
          *ImageableArea Legal/US Legal: "18 36 594 972"
          
          
          *DefaultPaperDimension: Letter
          *PaperDimension Letter/US Letter: "612 792"
          *PaperDimension A4/A4: "595 842"
          *PaperDimension 11x17/11x17: "792 1224"
          *PaperDimension A3/A3: "842 1191"
          *PaperDimension A5/A5: "421 595"
          *PaperDimension B5/B5 (JIS): "516 729"
          *PaperDimension Env10/Envelope #10: "297 684"
          *PaperDimension EnvC5/Envelope C5: "459 649"
          *PaperDimension EnvDL/Envelope DL: "312 624"
          *PaperDimension EnvISOB5/Envelope B5: "499 709"
          *PaperDimension EnvMonarch/Envelope Monarch: "279 540"
          *PaperDimension Executive/Executive: "522 756"
          *PaperDimension Legal/US Legal: "612 1008"
          
          
          *OpenUI *Duplex/Double-Sided Printing: PickOne
          *OrderDependency: 130 AnySetup *Duplex
          *DefaultDuplex: None
          *Duplex DuplexNoTumble/Long Edge (Standard): "<</Duplex true /Tumble false>>setpagedevice"
          *Duplex DuplexTumble/Short Edge (Flip): "<</Duplex true /Tumble true>>setpagedevice"
          *Duplex None/Off: "<</Duplex false>>setpagedevice"
          *CloseUI: *Duplex
          
          
          *OpenUI *Resolution/Resolution: PickOne
          *OrderDependency: 90 AnySetup *Resolution
          *DefaultResolution: 600x600dpi
          *Resolution 150x150dpi/150x150 DPI: "<</HWResolution[150 150]>>setpagedevice"
          *Resolution 300x300dpi/300x300 DPI: "<</HWResolution[300 300]>>setpagedevice"
          *Resolution 600x600dpi/600x600 DPI: "<</HWResolution[600 600]>>setpagedevice"
          *Resolution 1200x1200dpi/1200x1200 DPI: "<</HWResolution[1200 1200]>>setpagedevice"
          *CloseUI: *Resolution
          
          
          *CloseGroup: General
          
          
          
          
          *% Generic boilerplate PPD stuff as standard PostScript fonts and so on
          
          
          *DefaultFont: Courier
          *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
          *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
          *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
          *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
          *Font Bookman-Demi: Standard "(001.004S)" Standard ROM
          *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
          *Font Bookman-Light: Standard "(001.004S)" Standard ROM
          *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
          *Font Courier: Standard "(002.004S)" Standard ROM
          *Font Courier-Bold: Standard "(002.004S)" Standard ROM
          *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
          *Font Courier-Oblique: Standard "(002.004S)" Standard ROM
          *Font Helvetica: Standard "(001.006S)" Standard ROM
          *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
          *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
          *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
          *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
          *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
          *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
          *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
          *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
          *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
          *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
          *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
          *Font Palatino-Bold: Standard "(001.005S)" Standard ROM
          *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
          *Font Palatino-Italic: Standard "(001.005S)" Standard ROM
          *Font Palatino-Roman: Standard "(001.005S)" Standard ROM
          *Font Symbol: Special "(001.007S)" Special ROM
          *Font Times-Bold: Standard "(001.007S)" Standard ROM
          *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
          *Font Times-Italic: Standard "(001.007S)" Standard ROM
          *Font Times-Roman: Standard "(001.007S)" Standard ROM
          *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
          *Font ZapfDingbats: Special "(001.004S)" Standard ROM

          Please Read Me

          Comment


            #20
            Thank you very very much oshunluvr! I will look on it.

            Comment


              #21
              I went into the CUPS, I added a printer, I choose "socket" and wrote the printer link, I choose "Samsung-CLP-550-pxlcolor.ppd" (because the postscript.ppd version don't allow to choose a tray) that I downloaded, I choose "lower tray" in the configaration among other things.
              When I print, the configuration is already set on "lower tray". Yet it still prints with paper from the upper tray. I also tried with "middle tray" and in this case it also prints with paper from the upper tray.

              Furthermore, I always specified black and white and it printed in colors for all tests.
              (I am using Kubuntu 16.04 ;*I had the same problems with Kubuntu 14.04 that I used on another computer)
              Last edited by nicrnicr; Sep 14, 2017, 05:15 AM.

              Comment


                #22
                Hmmmm, that's curious. More research is needed. Just how many paper trays does that thing have? Sounds like it's stuck on Color and Upper tray all the time.

                There's some comments on OpenPrinting.org about Ghostscript bugs effecting tray selection. I didn't research it fully but I linked to that page for you.

                Here's the other ppd from openprinting for your printer:

                Samsung-CLP-550N-pxlcolor.ppd:
                Code:
                *PPD-Adobe: "4.3"*%
                *% For information on using this, and to obtain the required backend
                *% script, consult http://www.openprinting.org/
                *%
                *% This file is published under the GNU General Public License
                *%
                *% PPD-O-MATIC (4.0.0 or newer) generated this PPD file. It is for use with 
                *% all programs and environments which use PPD files for dealing with
                *% printer capability information. The printer must be configured with the
                *% "foomatic-rip" backend filter script of Foomatic 4.0.0 or newer. This 
                *% file and "foomatic-rip" work together to support PPD-controlled printer
                *% driver option access with all supported printer drivers and printing
                *% spoolers.
                *%
                *% To save this file on your disk, wait until the download has completed
                *% (the animation of the browser logo must stop) and then use the
                *% "Save as..." command in the "File" menu of your browser or in the 
                *% pop-up manu when you click on this document with the right mouse button.
                *% DO NOT cut and paste this file into an editor with your mouse. This can
                *% introduce additional line breaks which lead to unexpected results.
                *%
                *% You may save this file as 'Samsung-CLP-550N-pxlcolor.ppd'
                *%
                *%
                *FormatVersion:	"4.3"
                *FileVersion:	"1.1"
                *LanguageVersion: English 
                *LanguageEncoding: ISOLatin1
                *PCFileName:	"PXLCOLOR.PPD"
                *Manufacturer:	"Samsung"
                *Product:	"(CLP-550N)"
                *cupsVersion:	1.0
                *cupsManualCopies: True
                *cupsModelNumber:  2
                *cupsFilter:	"application/vnd.cups-postscript 100 foomatic-rip"
                *cupsFilter:	"application/vnd.cups-pdf 0 foomatic-rip"
                *%pprRIP:        foomatic-rip other
                *ModelName:     "Samsung CLP-550N"
                *ShortNickName: "Samsung CLP-550N pxlcolor"
                *NickName:      "Samsung CLP-550N Foomatic/pxlcolor"
                *PSVersion:	"(3010.000) 550"
                *PSVersion:	"(3010.000) 651"
                *PSVersion:	"(3010.000) 652"
                *PSVersion:	"(3010.000) 653"
                *PSVersion:	"(3010.000) 704"
                *PSVersion:	"(3010.000) 705"
                *PSVersion:	"(3010.000) 800"
                *PSVersion:	"(3010.000) 815"
                *PSVersion:	"(3010.000) 850"
                *PSVersion:	"(3010.000) 860"
                *PSVersion:	"(3010.000) 861"
                *PSVersion:	"(3010.000) 862"
                *PSVersion:	"(3010.000) 863"
                *PSVersion:	"(3010.000) 864"
                *PSVersion:	"(3010.000) 870"
                *LanguageLevel:	"3"
                *ColorDevice:	True
                *DefaultColorSpace: RGB
                *FileSystem:	False
                *Throughput:	"1"
                *LandscapeOrientation: Plus90
                *TTRasterizer:	Type42
                *1284DeviceID: "DRV:Dpxlcolor,R0,M0,F1,P0,TG;"
                
                
                *driverName pxlcolor: ""
                *driverType G/Ghostscript built-in: ""
                *driverUrl: "http://www.ghostscript.com/"
                *driverObsolete: False
                *driverManufacturerSupplied: False
                *driverFreeSoftware: True
                
                
                *DefaultResolution: 1200dpi
                
                
                
                
                
                
                *HWMargins: 18 36 18 36
                *VariablePaperSize: True
                *MaxMediaWidth: 100000
                *MaxMediaHeight: 100000
                *NonUIOrderDependency: 100 AnySetup *CustomPageSize
                *CustomPageSize True: "pop pop pop pop pop
                %% FoomaticRIPOptionSetting: PageSize=Custom"
                *End
                *FoomaticRIPOptionSetting PageSize=Custom: " -dDEVICEWIDTHPOINTS=0 -dD&&
                EVICEHEIGHTPOINTS=0"
                *End
                *ParamCustomPageSize Width: 1 points 36 100000
                *ParamCustomPageSize Height: 2 points 36 100000
                *ParamCustomPageSize Orientation: 3 int 0 0
                *ParamCustomPageSize WidthOffset: 4 points 0 0
                *ParamCustomPageSize HeightOffset: 5 points 0 0
                
                
                *FoomaticIDs: Samsung-CLP-550N pxlcolor
                *FoomaticRIPCommandLine: "gs -q -dBATCH -dPARANOIDSAFER -dNOPAUSE -dNO&&
                MEDIAATTRS -dNOINTERPOLATE%B%A%Z -sOutputFile=- -"
                *End
                
                
                *OpenGroup: General/General
                
                
                *OpenUI *PrintoutMode/Print Quality: PickOne
                *FoomaticRIPOption PrintoutMode: enum Composite A
                *OrderDependency: 10 AnySetup *PrintoutMode
                *DefaultPrintoutMode: Normal
                *PrintoutMode Draft/Draft: "%% FoomaticRIPOptionSetting: PrintoutMode=Draft"
                *FoomaticRIPOptionSetting PrintoutMode=Draft: "PrinterResolution=600x6&&
                00dpi ColorModel=Color"
                *End
                *PrintoutMode Draft.Gray/Draft Grayscale: "%% FoomaticRIPOptionSetting: PrintoutMode=Draft.Gray"
                *FoomaticRIPOptionSetting PrintoutMode=Draft.Gray: "PrinterResolution=&&
                600x600dpi ColorModel=Grayscale"
                *End
                *PrintoutMode Normal/Normal: "%% FoomaticRIPOptionSetting: PrintoutMode=Normal"
                *FoomaticRIPOptionSetting PrintoutMode=Normal: "PrinterResolution=600x&&
                600dpi ColorModel=Color"
                *End
                *PrintoutMode Normal.Gray/Normal Grayscale: "%% FoomaticRIPOptionSetting: PrintoutMode=Normal.Gray"
                *FoomaticRIPOptionSetting PrintoutMode=Normal.Gray: "PrinterResolution&&
                =600x600dpi ColorModel=Grayscale"
                *End
                *PrintoutMode High/High Quality: "%% FoomaticRIPOptionSetting: PrintoutMode=High"
                *FoomaticRIPOptionSetting PrintoutMode=High: "PrinterResolution=1200x1&&
                200dpi ColorModel=Color"
                *End
                *PrintoutMode High.Gray/High Quality Grayscale: "%% FoomaticRIPOptionSetting: PrintoutMode=High.Gray"
                *FoomaticRIPOptionSetting PrintoutMode=High.Gray: "PrinterResolution=1&&
                200x1200dpi ColorModel=Grayscale"
                *End
                *CloseUI: *PrintoutMode
                
                
                *OpenUI *PageSize/Page Size: PickOne
                *FoomaticRIPOption PageSize: enum CmdLine A
                *OrderDependency: 100 AnySetup *PageSize
                *DefaultPageSize: Letter
                *PageSize Letter/US Letter: "%% FoomaticRIPOptionSetting: PageSize=Letter"
                *FoomaticRIPOptionSetting PageSize=Letter: " -dDEVICEWIDTHPOINTS=612 -&&
                dDEVICEHEIGHTPOINTS=792"
                *End
                *PageSize A4/A4: "%% FoomaticRIPOptionSetting: PageSize=A4"
                *FoomaticRIPOptionSetting PageSize=A4: " -dDEVICEWIDTHPOINTS=595 -dDEV&&
                ICEHEIGHTPOINTS=842"
                *End
                *PageSize 11x17/11x17: "%% FoomaticRIPOptionSetting: PageSize=11x17"
                *FoomaticRIPOptionSetting PageSize=11x17: " -dDEVICEWIDTHPOINTS=792 -d&&
                DEVICEHEIGHTPOINTS=1224"
                *End
                *PageSize A3/A3: "%% FoomaticRIPOptionSetting: PageSize=A3"
                *FoomaticRIPOptionSetting PageSize=A3: " -dDEVICEWIDTHPOINTS=842 -dDEV&&
                ICEHEIGHTPOINTS=1191"
                *End
                *PageSize A5/A5: "%% FoomaticRIPOptionSetting: PageSize=A5"
                *FoomaticRIPOptionSetting PageSize=A5: " -dDEVICEWIDTHPOINTS=421 -dDEV&&
                ICEHEIGHTPOINTS=595"
                *End
                *PageSize B5/B5 (JIS): "%% FoomaticRIPOptionSetting: PageSize=B5"
                *FoomaticRIPOptionSetting PageSize=B5: " -dDEVICEWIDTHPOINTS=516 -dDEV&&
                ICEHEIGHTPOINTS=729"
                *End
                *PageSize Env10/Envelope #10: "%% FoomaticRIPOptionSetting: PageSize=Env10"
                *FoomaticRIPOptionSetting PageSize=Env10: " -dDEVICEWIDTHPOINTS=297 -d&&
                DEVICEHEIGHTPOINTS=684"
                *End
                *PageSize EnvC5/Envelope C5: "%% FoomaticRIPOptionSetting: PageSize=EnvC5"
                *FoomaticRIPOptionSetting PageSize=EnvC5: " -dDEVICEWIDTHPOINTS=459 -d&&
                DEVICEHEIGHTPOINTS=649"
                *End
                *PageSize EnvDL/Envelope DL: "%% FoomaticRIPOptionSetting: PageSize=EnvDL"
                *FoomaticRIPOptionSetting PageSize=EnvDL: " -dDEVICEWIDTHPOINTS=312 -d&&
                DEVICEHEIGHTPOINTS=624"
                *End
                *PageSize EnvISOB5/Envelope B5: "%% FoomaticRIPOptionSetting: PageSize=EnvISOB5"
                *FoomaticRIPOptionSetting PageSize=EnvISOB5: " -dDEVICEWIDTHPOINTS=499&&
                 -dDEVICEHEIGHTPOINTS=709"
                *End
                *PageSize EnvMonarch/Envelope Monarch: "%% FoomaticRIPOptionSetting: PageSize=EnvMonarch"
                *FoomaticRIPOptionSetting PageSize=EnvMonarch: " -dDEVICEWIDTHPOINTS=2&&
                79 -dDEVICEHEIGHTPOINTS=540"
                *End
                *PageSize Executive/Executive: "%% FoomaticRIPOptionSetting: PageSize=Executive"
                *FoomaticRIPOptionSetting PageSize=Executive: " -dDEVICEWIDTHPOINTS=52&&
                2 -dDEVICEHEIGHTPOINTS=756"
                *End
                *PageSize Legal/US Legal: "%% FoomaticRIPOptionSetting: PageSize=Legal"
                *FoomaticRIPOptionSetting PageSize=Legal: " -dDEVICEWIDTHPOINTS=612 -d&&
                DEVICEHEIGHTPOINTS=1008"
                *End
                *CloseUI: *PageSize
                
                
                *OpenUI *PageRegion: PickOne
                *OrderDependency: 100 AnySetup *PageRegion
                *DefaultPageRegion: Letter
                *PageRegion Letter/US Letter: "%% FoomaticRIPOptionSetting: PageSize=Letter"
                *PageRegion A4/A4: "%% FoomaticRIPOptionSetting: PageSize=A4"
                *PageRegion 11x17/11x17: "%% FoomaticRIPOptionSetting: PageSize=11x17"
                *PageRegion A3/A3: "%% FoomaticRIPOptionSetting: PageSize=A3"
                *PageRegion A5/A5: "%% FoomaticRIPOptionSetting: PageSize=A5"
                *PageRegion B5/B5 (JIS): "%% FoomaticRIPOptionSetting: PageSize=B5"
                *PageRegion Env10/Envelope #10: "%% FoomaticRIPOptionSetting: PageSize=Env10"
                *PageRegion EnvC5/Envelope C5: "%% FoomaticRIPOptionSetting: PageSize=EnvC5"
                *PageRegion EnvDL/Envelope DL: "%% FoomaticRIPOptionSetting: PageSize=EnvDL"
                *PageRegion EnvISOB5/Envelope B5: "%% FoomaticRIPOptionSetting: PageSize=EnvISOB5"
                *PageRegion EnvMonarch/Envelope Monarch: "%% FoomaticRIPOptionSetting: PageSize=EnvMonarch"
                *PageRegion Executive/Executive: "%% FoomaticRIPOptionSetting: PageSize=Executive"
                *PageRegion Legal/US Legal: "%% FoomaticRIPOptionSetting: PageSize=Legal"
                *CloseUI: *PageRegion
                
                
                *DefaultImageableArea: Letter
                *ImageableArea Letter/US Letter: "18 36 594 756"
                *ImageableArea A4/A4: "18 36 577 806"
                *ImageableArea 11x17/11x17: "18 36 774 1188"
                *ImageableArea A3/A3: "18 36 824 1155"
                *ImageableArea A5/A5: "18 36 403 559"
                *ImageableArea B5/B5 (JIS): "18 36 498 693"
                *ImageableArea Env10/Envelope #10: "18 36 279 648"
                *ImageableArea EnvC5/Envelope C5: "18 36 441 613"
                *ImageableArea EnvDL/Envelope DL: "18 36 294 588"
                *ImageableArea EnvISOB5/Envelope B5: "18 36 481 673"
                *ImageableArea EnvMonarch/Envelope Monarch: "18 36 261 504"
                *ImageableArea Executive/Executive: "18 36 504 720"
                *ImageableArea Legal/US Legal: "18 36 594 972"
                
                
                *DefaultPaperDimension: Letter
                *PaperDimension Letter/US Letter: "612 792"
                *PaperDimension A4/A4: "595 842"
                *PaperDimension 11x17/11x17: "792 1224"
                *PaperDimension A3/A3: "842 1191"
                *PaperDimension A5/A5: "421 595"
                *PaperDimension B5/B5 (JIS): "516 729"
                *PaperDimension Env10/Envelope #10: "297 684"
                *PaperDimension EnvC5/Envelope C5: "459 649"
                *PaperDimension EnvDL/Envelope DL: "312 624"
                *PaperDimension EnvISOB5/Envelope B5: "499 709"
                *PaperDimension EnvMonarch/Envelope Monarch: "279 540"
                *PaperDimension Executive/Executive: "522 756"
                *PaperDimension Legal/US Legal: "612 1008"
                
                
                *OpenUI *InputSlot/Media Source: PickOne
                *FoomaticRIPOption InputSlot: enum CmdLine A
                *OrderDependency: 100 AnySetup *InputSlot
                *DefaultInputSlot: Default
                *InputSlot Default/Printer Default: "%% FoomaticRIPOptionSetting: InputSlot=Default"
                *FoomaticRIPOptionSetting InputSlot=Default: " -dMediaPosition=0"
                *InputSlot Upper/Upper Tray: "%% FoomaticRIPOptionSetting: InputSlot=Upper"
                *FoomaticRIPOptionSetting InputSlot=Upper: " -dMediaPosition=4"
                *InputSlot Middle/Middle Tray: "%% FoomaticRIPOptionSetting: InputSlot=Middle"
                *FoomaticRIPOptionSetting InputSlot=Middle: " -dMediaPosition=5"
                *InputSlot Lower/Lower Tray: "%% FoomaticRIPOptionSetting: InputSlot=Lower"
                *FoomaticRIPOptionSetting InputSlot=Lower: " -dMediaPosition=6"
                *InputSlot Multipurpose/Multipurpose Tray: "%% FoomaticRIPOptionSetting: InputSlot=Multipurpose"
                *FoomaticRIPOptionSetting InputSlot=Multipurpose: " -dMediaPosition=3"
                *InputSlot Automatic/Automatic: "%% FoomaticRIPOptionSetting: InputSlot=Automatic"
                *FoomaticRIPOptionSetting InputSlot=Automatic: " -dMediaPosition=1"
                *InputSlot Manual/Manual Feeder: "%% FoomaticRIPOptionSetting: InputSlot=Manual"
                *FoomaticRIPOptionSetting InputSlot=Manual: " -dMediaPosition=2"
                *CloseUI: *InputSlot
                
                
                *OpenUI *Duplex/Double-Sided Printing: PickOne
                *FoomaticRIPOption Duplex: enum CmdLine A
                *OrderDependency: 100 AnySetup *Duplex
                *DefaultDuplex: None
                *Duplex DuplexNoTumble/On (Flip on Long Edge): "%% FoomaticRIPOptionSetting: Duplex=DuplexNoTumble"
                *FoomaticRIPOptionSetting Duplex=DuplexNoTumble: " -dDuplex"
                *Duplex DuplexTumble/On (Flip on Short Edge): "%% FoomaticRIPOptionSetting: Duplex=DuplexTumble"
                *FoomaticRIPOptionSetting Duplex=DuplexTumble: " -dDuplex -dTumble"
                *Duplex None/Off: "%% FoomaticRIPOptionSetting: Duplex=None"
                *FoomaticRIPOptionSetting Duplex=None: ""
                *CloseUI: *Duplex
                
                
                *CloseGroup: General
                
                
                *OpenGroup: PrintoutMode/Printout Mode
                
                
                *OpenUI *ColorModel/Color Mode: PickOne
                *FoomaticRIPOption ColorModel: enum CmdLine B
                *OrderDependency: 100 AnySetup *ColorModel
                *DefaultColorModel: FromPrintoutMode
                *ColorModel FromPrintoutMode/Controlled by 'Print Quality': "%% FoomaticRIPOptionSetting: ColorModel=@PrintoutMode"
                *ColorModel Color/Color: "%% FoomaticRIPOptionSetting: ColorModel=Color"
                *FoomaticRIPOptionSetting ColorModel=Color: " -sDEVICE=pxlcolor"
                *ColorModel Grayscale/Monochrome: "%% FoomaticRIPOptionSetting: ColorModel=Grayscale"
                *FoomaticRIPOptionSetting ColorModel=Grayscale: " -sDEVICE=pxlmono"
                *CloseUI: *ColorModel
                
                
                *OpenUI *PrinterResolution/Resolution: PickOne
                *FoomaticRIPOption PrinterResolution: enum CmdLine A
                *OrderDependency: 100 AnySetup *PrinterResolution
                *DefaultPrinterResolution: FromPrintoutMode
                *PrinterResolution FromPrintoutMode/Controlled by 'Print Quality': "%% FoomaticRIPOptionSetting: PrinterResolution=@PrintoutMode"
                *PrinterResolution 300x300dpi/300x300 DPI: "%% FoomaticRIPOptionSetting: PrinterResolution=300x300dpi"
                *FoomaticRIPOptionSetting PrinterResolution=300x300dpi: " -r300x300"
                *PrinterResolution 600x600dpi/600x600 DPI: "%% FoomaticRIPOptionSetting: PrinterResolution=600x600dpi"
                *FoomaticRIPOptionSetting PrinterResolution=600x600dpi: " -r600x600"
                *PrinterResolution 1200x600dpi/1200x600 DPI: "%% FoomaticRIPOptionSetting: PrinterResolution=1200x600dpi"
                *FoomaticRIPOptionSetting PrinterResolution=1200x600dpi: " -r1200x600"
                *PrinterResolution 1200x1200dpi/1200x1200 DPI: "%% FoomaticRIPOptionSetting: PrinterResolution=1200x1200dpi"
                *FoomaticRIPOptionSetting PrinterResolution=1200x1200dpi: " -r1200x120&&
                0"
                *End
                *CloseUI: *PrinterResolution
                
                
                *CloseGroup: PrintoutMode
                
                
                
                
                *% Generic boilerplate PPD stuff as standard PostScript fonts and so on
                
                
                *DefaultFont: Courier
                *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
                *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
                *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
                *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
                *Font Bookman-Demi: Standard "(001.004S)" Standard ROM
                *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
                *Font Bookman-Light: Standard "(001.004S)" Standard ROM
                *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
                *Font Courier: Standard "(002.004S)" Standard ROM
                *Font Courier-Bold: Standard "(002.004S)" Standard ROM
                *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
                *Font Courier-Oblique: Standard "(002.004S)" Standard ROM
                *Font Helvetica: Standard "(001.006S)" Standard ROM
                *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
                *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
                *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
                *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
                *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
                *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
                *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
                *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
                *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
                *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
                *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
                *Font Palatino-Bold: Standard "(001.005S)" Standard ROM
                *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
                *Font Palatino-Italic: Standard "(001.005S)" Standard ROM
                *Font Palatino-Roman: Standard "(001.005S)" Standard ROM
                *Font Symbol: Special "(001.007S)" Special ROM
                *Font Times-Bold: Standard "(001.007S)" Standard ROM
                *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
                *Font Times-Italic: Standard "(001.007S)" Standard ROM
                *Font Times-Roman: Standard "(001.007S)" Standard ROM
                *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
                *Font ZapfDingbats: Special "(001.004S)" Standard ROM
                I saw both mono/color and tray selection in there, unlike the postscript driver, but the bug issue might be in the way.

                Please Read Me

                Comment


                  #23
                  Dear All and dear oshunluvr,

                  Thank you very much for your support. I could print from the lower tray and in white and black after having installed a third kind of driver (the Samsung CLP-550, 2.0.0) :-) :-)
                  It is the only driver which clearly asks in the CUPS if I want to activate a second tray.
                  I didn't need to upload a .ppd file.
                  Cheers
                  PS:*How do you do to stay logged in Kubuntu*forum? I have to log in at least 10 times daily.
                  Last edited by nicrnicr; Sep 14, 2017, 06:38 AM.

                  Comment


                    #24
                    Isn't there a "Keep me logged in" tic-box when you log in?

                    Please Read Me

                    Comment


                      #25
                      Ah, It's labeled "Remember Me"

                      Please Read Me

                      Comment


                        #26
                        Thank you very much oshunluvr! Indeed there is a box "Remember me". Thank you again! :-)

                        Comment

                        Working...
                        X