Massakai
Mar 17th 2006, 06:34 PM
Bonjour a tous,
Je suis nouveau venu, j'ai installé Kubuntu il y a 1 semaine !
Tout d'abord, je voudrais dire que j'espere que ce forum francais va decoller un peu plus et que l'on pourra rapidement y trouver bcp plus de choses !!!!
Pour ma part, je suis infographiste programmeur, et j'ai 30ans (putain deja... ca file un coup qd meme...)
Le premier probleme auquel je me sui confronté a ete celui de faire demarrer mes 2 ecrans. Jusque la, rien de bien dificil, je suis allé a drt et a gch et j'ai fini par trouver mon bonheur !
NOTA: http://www.stationlinux.org/fiche.19.html
Apres qqs tests, j'ai reussi a faire demarrer mon 15p avec une savage de 8Mo et mon 19p avec une ATI Radeon 9200.
Le probleme qui se pose est:
1- qu'il m'est impossible de faire demarrer les 2 ecrans s'ils n'ont pas la meme profondeur (depth)
2- que je n'arrive pas a meme mon 15p en 1024*768 alors que seul, il s'affiche correctement
Voila, j'espere qu'un de vous aura une idée, je suis ouvert a toute suggestion !!!!!
A bientot...
ci joint mon xorg.conf ;D
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#* *sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
* * * * # paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
# Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "keyboard1"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "mouse1"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "deviceATI"
VendorName "ATI Technologies Inc."
BoardName "Radeon 9200"
Driver "ati"
screen 0
BusID "PCI:2:0:0"
VideoRam 128000
EndSection
Section "Device"
Identifier "deviceSavage"
VendorName "S3 Inc."
BoardName "S3 Savage 4"
Driver "savage"
screen 0
BusID "PCI:1:10:0"
VideoRam 8000
EndSection
Section "Monitor"
Identifier "monitorLiteOn"
VendorName "LiteOn"
ModelName "LiteOn19"
Option "DPMS"
HorizSync 30-100
VertRefresh 50-160
EndSection
Section "Monitor"
Identifier "monitorAcer"
VendorName "Acer"
ModelName "e1996PNST/NS"
Option "DPMS"
HorizSync 28-38
VertRefresh 43-72
EndSection
Section "Screen"
Identifier "screenATI"
Device "deviceATI"
Monitor "monitorLiteOn"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "screenSavage"
Device "deviceSavage"
Monitor "monitorAcer"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "keyboard1"
InputDevice "mouse1"
Screen "screenATI"
Screen "screenSavage" LeftOf "screenATI"
Option "Xinerama"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
Je suis nouveau venu, j'ai installé Kubuntu il y a 1 semaine !
Tout d'abord, je voudrais dire que j'espere que ce forum francais va decoller un peu plus et que l'on pourra rapidement y trouver bcp plus de choses !!!!
Pour ma part, je suis infographiste programmeur, et j'ai 30ans (putain deja... ca file un coup qd meme...)
Le premier probleme auquel je me sui confronté a ete celui de faire demarrer mes 2 ecrans. Jusque la, rien de bien dificil, je suis allé a drt et a gch et j'ai fini par trouver mon bonheur !
NOTA: http://www.stationlinux.org/fiche.19.html
Apres qqs tests, j'ai reussi a faire demarrer mon 15p avec une savage de 8Mo et mon 19p avec une ATI Radeon 9200.
Le probleme qui se pose est:
1- qu'il m'est impossible de faire demarrer les 2 ecrans s'ils n'ont pas la meme profondeur (depth)
2- que je n'arrive pas a meme mon 15p en 1024*768 alors que seul, il s'affiche correctement
Voila, j'espere qu'un de vous aura une idée, je suis ouvert a toute suggestion !!!!!
A bientot...
ci joint mon xorg.conf ;D
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#* *sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
* * * * # paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
# Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "keyboard1"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "mouse1"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "deviceATI"
VendorName "ATI Technologies Inc."
BoardName "Radeon 9200"
Driver "ati"
screen 0
BusID "PCI:2:0:0"
VideoRam 128000
EndSection
Section "Device"
Identifier "deviceSavage"
VendorName "S3 Inc."
BoardName "S3 Savage 4"
Driver "savage"
screen 0
BusID "PCI:1:10:0"
VideoRam 8000
EndSection
Section "Monitor"
Identifier "monitorLiteOn"
VendorName "LiteOn"
ModelName "LiteOn19"
Option "DPMS"
HorizSync 30-100
VertRefresh 50-160
EndSection
Section "Monitor"
Identifier "monitorAcer"
VendorName "Acer"
ModelName "e1996PNST/NS"
Option "DPMS"
HorizSync 28-38
VertRefresh 43-72
EndSection
Section "Screen"
Identifier "screenATI"
Device "deviceATI"
Monitor "monitorLiteOn"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "screenSavage"
Device "deviceSavage"
Monitor "monitorAcer"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "keyboard1"
InputDevice "mouse1"
Screen "screenATI"
Screen "screenSavage" LeftOf "screenATI"
Option "Xinerama"
EndSection
#Section "DRI"
# Mode 0666
#EndSection